Jump to content
SAU Community

Recommended Posts

G'day guys,

after a bit of enthusiastic boosting thismorninghappy.gif, i pulled up at an intersection only to have a heap of whitish smoke go drifting past me. from my exhaustdown.gif. so it doesnt seem to be smoking when im driving, just when im idling. when i rev it at idle, it gets worse... oil pressure and temp is normal. it still drives fine, just smokes a lot >.<

the car is a '92 GTST RB20DET and has a nismo front mounthappy.gif, k&n podhappy.gif, and some shitty hybrid turbo down.gif(think monsta- not my choice, previous owners!) and a 3" zorst.

any help on what could have happened would be much appreciated. . . im thinking maybe the oil seal in the turbo? idn.

flippen thing i was just about to splurge on coil packs, new zorst, boost controller and a tune.

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/272895-blowing-smoke-out-your/
Share on other sites

  • 3 weeks later...
hmm... hopefully not the valve stem seals >.<

i'll have to pull the turbo off when i get time then. im working a shutdown at the moment, so i'll post up what i find when i finish.

thanks hombre's.

Sooo, did you get a result?

If you see the turbo is leaking off both seals with no shaft play then you might want to check the oil drain and make sure your breathers are not blocked or into some doggy catch cans.

Other then that turbo probably just need new bearings and seals. we can have a look at if you like.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t taken them out of the cases yet    inside the box is this packaging which is pretty much like a massive blister pack 
    • Purchased a NC MX5 a while ago Basic suspension mods done, BC coils and Whiteline sway bars  New DBA calipers, discs and pads Added some 17 x 8 Konig Decagrams with 215/45 17 PS5's Added some typical NA bolt on's, i.e. full exhaust and intake  Added 0.5ltrs with a MZR2.5 swap, nice bump in torques  Found a detachable hard top which is locked in for a colour match with my local paint shop in Feb 25, this also includes some PDR as it has received a few love taps from parking in the local shops when in the hands of my Minister for War and Finances, me, I park nowhere near other cars and typically park on the street The little thing is awesome, I drive it everywhere, it handles like a dream whether I'm up it or just cruising  But now,  because I'm a idiot, I keep looking at turbo kits....... did I mention I'm a idiot Why is dose so appealing  All of the NA 2.5 glory, well.......until sometime in 2025 anyway....🤪  
    • I would not be surprised if you are the only person on earth that has the interest/desire to do that lol.  The Haltech base map is a really good starting point, the car will fire easily and drive very well, even on mild boost levels. To me, following your advice sounds like some sort of ancient Chinese water torcher lol (this is not an insult Josh, never change <3)
    • Those car show concepts from the 2000's and 2010's like the Floria and IDx were brilliant and should've gone ahead, at least one of them. But neither Honda nor Nissan are thinking about affordable performance any more, which is truly sad.  Even if Toyota's liquid hydrogen ICE development reaches the point where it's commercially viable and the infrastructure to support it, Honda/Nissan would have to wait until Toyota allow fee access to their patents to offer it with any smaller performance models they released to take advantage of it.  
    • A sporty manual RWD coupe with a IL4 Honda engine would only be a good thing I assume we won't see anything released for a few years though, unless informal talks and designs have been going on for a few years,  and due to the current, and future, emmisions and safety requirements, I assume anything "sporty" they would do would be at least some hybrid thingie And hopefully anything they are thinking of has nice lines, without lots of plastic and fake bits hanging off it like that horrendous FK8 that looked like it was designed by a 13 year old The other issue of course in the current market is cost, currently the type R is around $70k, a twin is around $50k Meh, I'm old and grumpy and would rather buy a older model car and waste my coin on that than buying anything currently available new  
×
×
  • Create New...