Jump to content
SAU Community

Recommended Posts

Ello.

I have a bit of a problem with me clutch/gearbox - 1st is very difficult to select, and 2nd also gives me trouble (and even 3rd slightly shows some resistance) but especially the reverse gear..

Now I'm quite sure it's not the gearbox (?) as I initially thought, but more the clutch - the reason I say this is that even though the clutch is fully pressed down, when I select reverse (eventually after quite a struggle), it feels as if the gear is now engaged as the car starts to move slowly (on a flat plain).

Also, my clutch has recently become (more) heavy... so the problem wouldn't be simple like a stretched clutch cable would it? It's a GTR, so it can't be a simple problem.....

Anyway - the car is off to the mechanic tomorrow, would like to just have some idea of what it may be before I take it there.

Cheers for your help! :laugh:

Argh. Sounds expensive. Do you know if it's a painful job and if it's expensive? :laugh:

You can do it yourself with a 12 & 14mm socket, a phillips screwdriver, a pair of pliers, and a rebuild kit for about $15-20 for each.

Piece of cake.

Hey guys -

We actually found that the clutch booster cylinder has split so there's an air leak there, so that's being replaced. Also getting my leaking ABS unit replaced as I assume the brake master cylinder also needs to come out of the way for the clutch booster cylinder to be replaced.

I hope there isn't a problem with the clutch's pressure plate as well :)

The GTR strikes the bank again ;)

Yeah what was the verdict I have the exact same problem, 1st and reverse are almost impossible which makes traffic lights interesting.

Can you let us know what it was, from what I have ready usually clutch related i.e worn cover, pressure plate or both. I'm running a OS Giken twin plate which has already been refurbished back in 2006, loooks like it's time again!

M

I had a similar problem with my previous clutch.

I had a leaking slave cylinder so had that replaced. When they installed it they didn't bleed the clutch fluid properly, I noticed it was a little crunchy on the way home when I picked it up but kinda came and went.

Had zero time to do it myself, and the workshop were too far away, so kept driving, clutch pedal kept getting heavier and heavier, hard to get into gears sometimes. Clutch wore out as it wasn't disengaging completely, then pivot ball snapped and fell out the bottom one day.

New clutch for me. Had a lot of other stuff being done around the same time so new clutch made sense anyway - thats how I justify it....

Thanks for the reply Paul, do you think having air in the system contributed to your clutch failure or would you say it was worn regardless?

I'll have a look at my slave and master shortly and see anything dodgy. My car is running just shy of 600hp so it's possible mine is just worn from use.

M

I had a similar problem with my previous clutch.

I had a leaking slave cylinder so had that replaced. When they installed it they didn't bleed the clutch fluid properly, I noticed it was a little crunchy on the way home when I picked it up but kinda came and went.

Had zero time to do it myself, and the workshop were too far away, so kept driving, clutch pedal kept getting heavier and heavier, hard to get into gears sometimes. Clutch wore out as it wasn't disengaging completely, then pivot ball snapped and fell out the bottom one day.

New clutch for me. Had a lot of other stuff being done around the same time so new clutch made sense anyway - thats how I justify it....

must be the season for failing clutch boosters mine has a nice split through it! im after a new one anyone got a source for em? also heard you can use some model nevara clutch master cylinder and clutch booster dont suppose anyone has more info on this?

cheers crew

Dion

would you say it was worn regardless?

Nah the clutch was in good condition, was not too old and didn't go out in the usual way. It was either air in the fluid or the clutch fork & pivot were not aligned properly causing the crunch, and ultimately caused the pivot to fail.

600hp eh... yeah I imagine you would move through clutches fairly regularly. Better than gearboxes or driveshafts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • H2 (for cars) will never happen. It's not reasonable for any number of reasons. It's also not reasonable for almost all of the industrial uses that the fanbois say that it will be used for, again for a large number of reasons. There are some cases where it will be good. But, even those will be massively hampered by the economics. The only way that H2 can be economic is if we somehow manage to get from where we are to the other side of the economic-valley-of-death in which no-one can operate. You need there to be sufficient renewable generated electricity to be available so that it is effectively free. Once you are there, you can do whatever the hell you want and hang the efficiency. But until you get there, the ever diminishing value of electricity makes it harder and harder to encourage businesses to build the new generation capacity, and they will simply stop investing in generation projects. (I kinda think there needs to be just government money spent on building the required capacity in a non-commercial way, similar to how the first fossil fueled grids were built, as national-government owned utilities. And probably some nuclear in there to start. But this all should have started 10-15 years ago to avoid the chasm of death that we face right now). Synth fuels will be much more likely, but will only occur is there is at least some renewable H2 production, because you need H2 to do it. And you need stacks of free (or at least extraordinarily cheap) energy because assembling molecules back into fuels is exactly the opposite process to burning the fuel, and the reason we burn fuels is because there is so much energy squeezed into each molecule. So you're somewhat subject to the same economic valley of death problem as above anyway. That is unless people are willing to pay the current equivalent of $5 or $6 per litre of petrol-ish liquid fuels. Can you imagine it? The squealing at $2 now is bad enough.
    • This is so cool. Get a dashcam that records audio and hopefully you'll catch it.  Maybe there's a brand or some kind of markings on the back ? Are the pics hand drawn? I love it so much.
    • Hahaha yep, point(s) taken. I just like seeing different things and an EV in an R32 is pretty different. I'm not on the EV band wagon, I'm waiting for synthetic fuels or hydrogen personally. 
    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
×
×
  • Create New...