Jump to content
SAU Community

Group Purchase Cf Z-tube & Jwt Pop Charger !


Recommended Posts

Guys since our dollar is so stong at the moment , im going for the z-tube and the pop charger. I was looking at this :

http://cgi.ebay.com/ebaymotors/INFINITI-G3...sQ5fAccessories

But also looking at going for better quality in this :

http://www.thezstore.com/store/merchant.mvc (click on product in the shipping basket section)

If anyone else is interested in purchasing this let me know , I suggest those who are involved with the group buy of the motordyne spacer should take a serious think about this as the result are said to be well worth it.

Any responses or question to be posted so saves same questions being asked. Also if anyone else has these items and purchased them from else where cheaper , please let us know.

Edited by manda23
Link to comment
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

u should check more info about the cf tube by zstore, read it in 350ztech forum, OR ask BLISTC to clear u on that.

From what i read the cf tube from z store is the best quality. Some one mentsion that the one from the evo-r.net goes yellow over time. I would rather pay the extra $$ for the quality and not have to worry .

Link to comment
Share on other sites

I'm interested in both also.

See how you go with pricing. I would also prefer to get the better of the two and not have to worry about it later.

Link to comment
Share on other sites

From what i read the cf tube from z store is the best quality. Some one mentsion that the one from the evo-r.net goes yellow over time. I would rather pay the extra $$ for the quality and not have to worry .

FYI - The Z Store CF Tubes are Evo-R ones. It was mentioned on 350Z-Tech and the Z Store confirmed. Thread Here (Post #21 on Page 2).

Link to comment
Share on other sites

FYI - The Z Store CF Tubes are Evo-R ones. It was mentioned on 350Z-Tech and the Z Store confirmed. Thread Here (Post #21 on Page 2).

yes the Z store ones are from Evo-R, I've sent Evo-R about the GB pricing, but haven't got any replys yet.

Link to comment
Share on other sites

just an advise, if u guys are getting the cf tube, mayb dont get the JW intake with the z tube? coz it will be just a waste, coz u hv the cf tube already?

I am sharing coz, it's my mistake anyway.. :banana:

Link to comment
Share on other sites

just an advise, if u guys are getting the cf tube, mayb dont get the JW intake with the z tube? coz it will be just a waste, coz u hv the cf tube already?

I am sharing coz, it's my mistake anyway.. :)

Personally I either get the package of z-tube and jwt pop charger package from riverside infinity or get the z-tube from the z-store as they are cheaper then the evo-r.net and then purchase the jwt pop charger seperate

Link to comment
Share on other sites

I'm in!

just want to know, what the difference is between the ebay one and the zstore one?

From what I can see and read the eBay z-tube is harden plastic where the z-store tube is made from carbon fibre .

I'm willing to organize this but again it's my first time so anyone who has any input where to get and what's the best I'm ready to listen !

Link to comment
Share on other sites

manda23

first contact a few different people. i contacted 3 different people before i found the cheapest price for the spacer.

secondly, the best way to save the most money is to order a few and send to 1 address. that way you save on shipping

keep in mind though orders over $1000 AUD are subject to 10% GST and 15% Import and Customs Duty taxes on top. So that means try keep the price down or work something out with the supplier again

If i were you organise the GB for JUST THE POPCHARGER on its own, with no Tube. leave it up to the people to buy which tube they want.

hope this helps

-mark

Link to comment
Share on other sites

is there any movement? or im just gonna buy from ebay~~

Are you buying the pop charger and the z-tube or just the pop charger ?

I wont be getting things organised probably until the end of next week , but im definately getting them

Link to comment
Share on other sites

Are you buying the pop charger and the z-tube or just the pop charger ?

I wont be getting things organised probably until the end of next week , but im definately getting them

im loooking for the whole thing, z-tub and charger..

thanks~!

Link to comment
Share on other sites

so whats happening with this? Are we still progressing with a group buy?

Does it really make a difference whether we use the EVO-R tube or the OEM/Plastic tube?

If im not mistaken they give the same HP gains?

Link to comment
Share on other sites

Hi Guys,

I contact the Ebay seller.

They offered USD1165 for 5, which equates to USD233 Each. If we were to buy individually it will be USD250. So roughly a USD17 saving.

I reckon we can try bargain it down more.

USD233 = AUD295 @ 0.79

Link to comment
Share on other sites

Hi Guys,

I contact the Ebay seller.

They offered USD1165 for 5, which equates to USD233 Each. If we were to buy individually it will be USD250. So roughly a USD17 saving.

I reckon we can try bargain it down more.

USD233 = AUD295 @ 0.79

That's great any savings would be good . Did you find out about shipping costs and about paying any extra taxes ?? If your ready to purchase il transfer the money .

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Because there is still an engine underneath that turbo. PSI is not a measurement of power, it's a byproduct of resistance. What would be really decent is to have a CFM gauge on the output of a turbo to see how much it's actually pushing. 21psi (as an example) is not the same amount of air at 3000rpm as it is at 7000rpm, even if the boost controller is controlling boost at "21psi". The engine is inhaling and exhaling way more air at 7000 than at 3000, even if it's less efficient.
    • don't want anything more or less, I don't really understand why the torque still goes up to 6000-6500, while the boost peak is around 4000. if it only comes from the cams or from the boost controller etc.  
    • I'm not sure you understand the physics of what you are asking. Can you draw on the dyno graph what you want to have happen? I'm thinking this is a functional impossibility here, unless you chose a turbo literally so laggy that torque is at max at 7000rpm and artificially choked prior to that. Power and Torque are intrinsically linked. Power is just Torque over time. What you're really seeing in the torque graph is "Power per RPM" if that makes any sense whatsoever. You still get more power at 7000rpm than 5000rpm, because it is "power per RPM" and you have more RPM. at 7000 than you do at 5000. You still feel more powerful at 7000rpm. The torque graph will influence the rate of power increase per RPM.
    • Welcome!  If possible,  would live to see some pics. How long was it away getting the work done? Hopefully it feels like a new machine.
    • yes indeed the graphic format makes a visual difference but there is on average 120nm more between 4000 and 6000rpm on the curves it is not nothing. you are right, the cams influence the torque curve. I was able to chat with one of the Hypergear tuners, he confirmed that a boost control allows you to manage the pressure after the spool. the absolute pressure (psi) on the graphics is measured where? It seems that the cams affect the maximum pressure depending on the regime but I may be wrong.   not pleasant to drive before 4000? if we spend our lives between 1000 and 3000 rpm as you say then we might as well just run diesel turbos
×
×
  • Create New...