Jump to content
SAU Community

Rb26 N1 Block Measurements And Pics.

sebastion
 Share

Recommended Posts

sebastion Proficient

sebastion

Posted
Posted

hey guys, I need some help, with obtaining measurements of an rb26 N1 block.

any help will be very appreciated, please specify what points you are measuring from, and if possible please include pictures of every possible angle of the block (front, back, top, bottom.etc).

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/273293-rb26-n1-block-measurements-and-pics/
Share on other sites
sebastion Proficient

sebastion

Posted
  • Author
Posted

common guys, we need measurements from the following points:

center of crankshaft to top of block

top to bottom of block (front), back to front (top and side) longest points

need lengths of spacing in the cradle (edge to edge-please specify where you measured) need width of cradle journals.

please, any help will be appreciated

sebastion Proficient

sebastion

Posted
  • Author
Posted
I think its a case of no one just having N1 blocks sitting around. :)

Best bet is to just buy one if you need to do anything specific with one

just a bit to expensive for us at the moment mate, could someone just measure up a standard one from the specified points please?

sebastion Proficient

sebastion

Posted
  • Author
Posted
I also would...but I only have the RB26DETT...not N1.

sorry.

would you be able to grab some of the standard block please mate? It seems no one has an N1 block at the moment.

If anyone has an rb26 block for sale near brisbane we will buy one to get measurements.

thanks for the reply's guys.

cheers

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
I also would...but I only have the RB26DETT...not N1.

sorry.

would you be able to grab some of the standard block please mate? It seems no one has an N1 block at the moment.

If anyone has an rb26 block for sale near brisbane we will buy one to get measurements.

thanks for the reply's guys.

cheers

On that note, I am guessing a RB26 N1 Block is the size as the Normal RB16 block as it is the same engine, just made from stronger material.

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
On that note, I am guessing a RB26 N1 Block is the size as the Normal RB16 block as it is the same engine, just made from stronger material.

N1 blocks are cast from the same parent material as 05U blocks. The difference is thicker cylinder walls and deck thickness to prevent bores splitting and cracking around the head studs which 05U blocks are prone to.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
N1 blocks are cast from the same parent material as 05U blocks. The difference is thicker cylinder walls and deck thickness to prevent bores splitting and cracking around the head studs which 05U blocks are prone to.

Thanks for clearing that up! :down:

But size wise it is still the same..?

KamikazeNinja34 Veteran

KamikazeNinja34

Posted
Posted
would you be able to grab some of the standard block please mate? It seems no one has an N1 block at the moment.

If anyone has an rb26 block for sale near brisbane we will buy one to get measurements.

thanks for the reply's guys.

cheers

Sure, can measure it tomorrow if you want. from which points? just length and width of the block itself?

sebastion Proficient

sebastion

Posted
  • Author
Posted
common guys, we need measurements from the following points:

center of crankshaft to top of block

top to bottom of block (front), back to front (top and side) longest points

need lengths of spacing in the cradle (edge to edge-please specify where you measured) need width of cradle journals.

please, any help will be appreciated

I have a RRR block sitting on my stand waiting for my car to arrive. I can measure that on the weekend if you like.

Let me know ...

yeah thanks mate, that would be well appreciated,

Sure, can measure it tomorrow if you want. from which points? just length and width of the block itself?

hey mate, yeah from the above points, and any diagonals. that would be great

cheers guys, thanks for the intrest

Beer Baron Grand Master

Beer Baron

Posted
Posted
I have a RRR block sitting on my stand waiting for my car to arrive. I can measure that on the weekend if you like.

Let me know ...

want to sell that block? or swap + cash your way for a brand new N1 block.... :P ?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Using Trickle Chargers

      By MBS206 · Posted

      I have two German Shepherds that like to bite things that are in places they shouldn't be. Plus the cars/batteries on chargers are inside a locked garage, inside that fully fenced and locked yard. If you can get the car out, you can have it, as I'll be having one hell of a laugh at your expense.
    • soviet_merlin
      Using Trickle Chargers

      By soviet_merlin · Posted

      Looks like they changed the wording in the manual for the new model. I have a different model. Mine is CC1206. Not CC1206-XLI. Mine doesn't support lithium at all. I can't find the manual for my model online and they don't list the model on the Century website anymore either. In my manual it says what I quoted and that they recommend to not leave it on 🤷‍♂️ Sounds like you'd be fine with this one now.
    • soviet_merlin
      Coc or nox of nissan skyline

      By soviet_merlin · Posted

      Thanks for actually answering every single point! I noticed the date only after posting. And yes, looks like things have changed a little bit since then. FWIW, looks like Government Gazette No 253 has the current emissions test procedure. Sounds pretty reasonable altogether. One thing I learned from this is that it's possible to check whether a catalyst does any work by measuring the temperature. Catalyst outlet temp is at least 40°C higher than inlet temps if there is a reaction happening. I'd be curious to check this on mine but don't have a thermometer. Because purely going by smell it can't be doing much. Personally I'd be okay to pay for the test as long as it's within reason. My main concern would be to lose my rego because it definitely wouldn't pass the test in its current state. I'll see if I can do a bit more digging and see what's involved in doing this nowadays.   To be fair I don't think it's stopping many people from doing the modifications anyway. It just puts a barrier up to doing things right  
    • tomaytown
      Skyline R34 Non- Turbo

      By tomaytown · Posted

      Uhhh if anyone sees this - I bought a BRZ years ago, on my fulls soon so back on the market for the R34!
    • The Bogan
      newbie attempts the GTR life.

      By The Bogan · Posted

      Research research research, and tackle the important things first, like the rust, because as a wise old hippie and some crazy horses once said "rust never sleeps" Nothing good comes easy and fast, and nothing that comes easy and fast is typically good
×
×
  • Create New...