Jump to content
SAU Community

How to Remove my R33gtst Front Bar???

Guest RedLineGTR

By Guest RedLineGTR,
in Exterior & Interior Styling

 Share

Recommended Posts

camandcandice Collaborator

camandcandice

Posted
Posted

Mine is a series 2 but i couldnt see there being much difference

There are 2 bolts on either side of the chassis rails

Then there are 2 bolts under each wheel arch lip

i was suprised that this was all that was holding on my front bar

AutoTrust Mentor

AutoTrust

Posted
Posted

Plastic clips under grille, leave to last, pull down inner plastic at front of wheel arch to gain access to bolts on top edge of side of bar. Best to remove wheels but not neccesary. also bolts through chassis rail accessed in front of wheels. The bolts from thedge of the bar to the guard can be annoying, helps to have a good socket set! Go NUTS!

predator Grand Master

predator

Posted
Posted

once you got the chasis rail bolts out (2x of them on either side)... and the side bit screws.. the whole sucker should just slide out along its rails. Put down a blanket or something so you don't scratch it when you put it on the ground.

Airzone Rising Star

Airzone

Posted
Posted

There's a screw on each top corner of the bar - where it ends in the wheelarch. You might have one of those plastic covers in your wheel arch to get past. Also, there are 2 screws on the bottom corners of the bar also.

BTW, this method also removes the front metal bar, right? Not just the plastic bit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R34 GTT idle problem

      By Dose Pipe Sutututu · Posted

      Oh yeah forgot to also mention need to also unplug the IACV as well. Thanks for the reminder @MBS206 Unplugging the TPS takes it out of closed loop so you're able to screw down the IACV without the ECU trying to add/subtract timing to maintain the idle (not sure PowerFC can even do this, but Nistune and the OEM definitely does)
    • Bman1296
      Nissan Skyline R34 GT-T 1999

      By Bman1296 · Posted

      For sale is my 1999 Nissan Skyline R34 GT-T, tuned to 234 kW / 313 hp. I've had the car for a few years as my daily driver. The car is original (as far as Skylines go), with only a few minor upgrades to enhance performance and driving experience, as typical for such a car of its age. Overall, it is in great condition with no body rust, thanks to its earlier import date. It features a top-notch security system (not literally, but it's great!) with remote start and still functional 4-wheel steering via HICAS. It comes with several performance and handling upgrades, including:     Hypergear 450HP Turbocharger running 17 PSI boost, installed mid-2021 by Jaustech     550cc injectors     Nistune ECU     Front-Mount Return-Flow Intercooler     X-Force Stainless Steel Exhaust     Upgraded engine mounts     Bottom end bearings replaced     BC Coilovers     Lenso DR1 rims     Bridgestone Potenza Adrenalin RE003 TL 245/40R18 97W tires, fitted early 2023 The interior is mostly stock, with a few additions:     Viper Satellite Tracking System with remote start     Bluetooth Double-Din Touchscreen Head Unit     Steering wheel cover Cons:     A few paint imperfections here and there     Driver’s seat shows more wear than the others. It's not torn at all, but I've added a seat cover to protect its condition. I also have a CarVX Vehicle History report available for serious buyers, so you don’t need to purchase it yourself. Price: $26,000 ONO.
    • TurboTapin
      Troubleshooting - motor wont turn over

      By TurboTapin · Posted

      I've had two suzukis in the past have an extremely hard time turning over and not starting after sitting for a few weeks. Ended up the alternator would seize up causing the starter to force. Same issue both times.  Maybe they're sourcing their alternators from the same place...
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ah right. Maybe my rb just loves chewing through batteries lol.
    • MBS206
      R34 GTT idle problem

      By MBS206 · Posted

      On the R34 can't you just unplug the IACV? This is the way I've always done it on the R33. Disconnect IACV, get it idling around 650rpm, and then do a power reset on the ECU to get it to relearn idle (factory ECU).   The big reason no one has touched on as to why you'd want to get the base idle right, is that it means the computer needs to make smaller adjustments to get a good idle at 700-750rpm.   Also, cleaning the IACV won't normally make the car suddenly idle lower or higher. The main issue with the IACV gumming up is that the valve sticks. This means the inputs the ECU gives, aren't translating to changes in air flow. This can cause idle choppy ness as the ECU is now needing to give a lot of input to get movement, but then it moves too far, and then has to do the same in reverse, and it can mean the ECU can't catch stalls quickly either.
×
×
  • Create New...