Jump to content
SAU Community

Recommended Posts

I was wondering if anyone has attempted to remove the ABS from a skyline.

When i say removing i mean the whole system not just taking the ABS fuse out :)

if someone has attempted this or know someone that has can you let me know how you went about it what the cost was etc!!!

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/27354-removing-abs-of-r32-gtst/
Share on other sites

predator, ABS was an option, I think (my GTS4 certainly has it).

Frosty,

how did ABS nearly kill you? As I said, I've got ABS, but I think I've only ever activated it twice in the 4 years I 've had the car. Probably because I learned threshold braking many years ago, so I control the lockup point of the brakes.

I would suggest it's not a good idea to remove the ABS - you don't know what effect it will then have on brake performance.

I can sympathise with wanting to get rid of ABS, particularly the reportedly inferior version on early 90's Japanese cars. It can sometimes come on in an unexpected way. If you maintain a level head you can outbrake a car with an ABS system, after you lose traction. I'll give you an example.

Recently I was driving around a sharp-ish curve up to an unexpected red light. The car in front of me had slammed on his brakes and I had to do likewise. I wasn't going very fast (maybe 50kph?) but because of the curve, the short distance, and my shithouse front tyres, I managed to easily lock them up.

As soon as it happened, I just backed off and re-applied properly and continued to pull up within ample distance of the car in front. If I had ABS, I think I would have had to rely on them to pull me up, as it's very difficult to do this when you have to contend with the computer trying to do the same thing as you. More than likely you will let your foot up too much and increase your stopping distance by a fairly large amount.

That said, I'd like to have ABS on my motorcycle, because once you lock up the front you usually crash (as I have done several times). In this case I would rather have significantly increased stopping distances than dumping the bike on its side and sliding down the road (which won't slow you down as much as even a bad braking application).

There are times when ABS is good and ABS is really annoying. Depends on your driving pattern, and skill level. I'd be tempted to leave it in for daily duties since braking in a straight line is a no brainer with ABS just nail the middle pedal. But if you're doing track work you might want to be in control of the brakes.

Apparently the method for using ABS is simply keep the foot buried on the pedal and let the ABS do the work for you. I guess that's because that's what the average d1ckhead motorist does in a panic stop - bury the foot.

Maybe that's why Frosty had a problem - he tried to outsmart the ABS.

But it certainly takes some getting used to if you have learned to threshold brake.

If its going to cost money to remove the ABS, i say leave it ...especially if you are doing track work. If using soft type R rubber it will only take one lock up and you have ruined a $450 tyre.

Im not phased that my car doesnt have ABS... but in my old R31 GTSX i wish i had it, as with it i suspect the car would still be with me.

blind_elk

i have done car trainer programs aswell as you probly have too

when i hit the ABS the pedal went straight to the floor. I would much prefer not to have it as kdince braking is much more easier than a computer

as JIMX is saying there was major problems with the ABS in the early jap cars including the R32 and im not the first to have problems with this system......

Well, in hindsight, that happened to me, although it was simply a case of 'pedal to floor' under light braking. It was at Winton, just after I had got the car. I presumed at the time it was because the brakes had overheated.

But it has NEVER happened since. Even on the racetrack.

hmm ok

i dont know what it is with mine they just never pull up like they should even around town and normal driving.

when i had the accident i was only doing 30kms and she just wouldnt stop

so thats what made me actually make my mind up

no real damage to the skyline lucky only smashed the front bar and a rim :)

will be all good soon :P

YAAY!!!!! cant wait to get it back on the road

I have removed the ABS from my R33. The main reason was I didn't like it, plus it was the ideal location for my 45mm external wastegate. The easiest option is to get the brake lines from the non-ABS Skyline, they should fit up easily.

I like the ability to completely control my braking:D

Just my 2c worth, I won't buy a car without ABS.

ABS detects wheel slip when it happens and eases off the wheel in question (assuming it is 4 channel ABS). As soon as the individual whele regains traction it allows braking pressure again.

As a driver, you *can* outbrake ABS. All you need to take into account is:

Road Surface

Road temperature

Tyre grip

Brake heat

changes/bumps in road surface

condition of your fluid, lines, master and slave cylinder.

Personally, I reckon its a crock that you could do all of the above in unknown road conditions at a moments notice.

Even on the track its really difficult to get right, and there you do exactly the same corner every 1-2 minutes. Realistically, you find a brake marker (in other words you have already decided how far you need to stop) and then brake in that distance, ie brake harder and harder until the wheels lock, then back off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don’t really have any ideas how to set the timing on the CAS 😂, sounds like the top, sounds like it maybe misfiring as well as ticking,  got the box sorted 😌, must of been a air bubble on the clutch side
    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
×
×
  • Create New...