Jump to content
SAU Community

Recommended Posts

Some places are getting strict on RWC...

Without taking the turbos off, you mechanic would have to bolt on a stock exhaust system, air box, you might get away with the Front mount intercooler but I would assume you will need to put back a R33 Side mount intercooler.

After passing the RWC you can bolt everything back on.

how would a RWC know if you have an upgraded turbo? unless its an obvious highmount, i doubt they would know whats under the heatsheild?

Intercooler is legal as long as you dont have airpod. So replace it with the standard airbox. Although if you cut a hole under the battery tray to pass intercooler piping they might sting you on that.

Why does it matter if you have an upgraded turbo or not? Isn't a roadworthy check over the general condition of the car, ie all safety components work (seatbelts etc.) all lights work, and the car has no major leaks anywhere?

Page 10 - Section J of the rwc requirements thing on vicroads states:

"All mountings, brackets, and fastenings, necessary for the safe operation of the vehicle must be secure and free from damage, deterioration or abnormal distortion. All shafts, splines, universal joints, support bearings, tail shaft guards and other drive-line components must be in good condition and free of excessive wear and vibration.

The power unit, clutch system, transmission system, differentials, axle housings, and all associated pipelines must be properly sealed and free of dripping or flowing oil leaks onto the roadway, exhaust system, or brake friction surfaces. Dampness, weeping or staining are acceptable but oil leaking from the underside of the vehicle to such an extent that it is likely to drop oil on the road surface (if the vehicle is parked or idling stationary for any length of time) is unacceptable.

Any insulating material in an engine enclosure must be in good condition and free from contamination by fuels or lubricants and there must not be any accumulation of fuel or lubricant in the engine compartments."

No where does it state you can't have an upgraded turbo?

There is a section on modified vehicle, stating modifications fall into three categories etc. but also states that "an examination should be confined to checking that the modification appears to be properly executed and not in a condition which presents a hazard."

the up grading of turbo will be under the emissions area which is a item , any way go to Oh performance 186 mc intyre rd sunshine , they do one for you , im sure you have all your tyres and stuff ok , go and try them out , they have helped a lot of guys out ,

Why does it matter if you have an upgraded turbo or not? Isn't a roadworthy check over the general condition of the car, ie all safety components work (seatbelts etc.) all lights work, and the car has no major leaks anywhere?

Page 10 - Section J of the rwc requirements thing on vicroads states:

"All mountings, brackets, and fastenings, necessary for the safe operation of the vehicle must be secure and free from damage, deterioration or abnormal distortion. All shafts, splines, universal joints, support bearings, tail shaft guards and other drive-line components must be in good condition and free of excessive wear and vibration.

The power unit, clutch system, transmission system, differentials, axle housings, and all associated pipelines must be properly sealed and free of dripping or flowing oil leaks onto the roadway, exhaust system, or brake friction surfaces. Dampness, weeping or staining are acceptable but oil leaking from the underside of the vehicle to such an extent that it is likely to drop oil on the road surface (if the vehicle is parked or idling stationary for any length of time) is unacceptable.

Any insulating material in an engine enclosure must be in good condition and free from contamination by fuels or lubricants and there must not be any accumulation of fuel or lubricant in the engine compartments."

No where does it state you can't have an upgraded turbo?

There is a section on modified vehicle, stating modifications fall into three categories etc. but also states that "an examination should be confined to checking that the modification appears to be properly executed and not in a condition which presents a hazard."

Refer to the Vehicle Standards Information (VSI's) that are on VicRoads website (all of them, not just #26), they make no clear indication that you CAN have a turbo.

If fact they make bugger all reference to emissions at all in most instances. Being this is a job for the EPA.

Therefore one must assume it is now allowed until you seek written advice from VicRoads... and guess what they will say? :)

The RWC form is very general, your talking about a specific modification specific to model of car and so on.

Its certainly not allowed to emissions rules, and emission rules can put your car off the road/deem it unroadworthy - so its pretty simple.

VicRoads documents as always, are broad and unspecific and make no reference to anything in particular. Also to boot they are horribly outdated and have not been substancially reviewed in over 10 years.

If you have specific questions get it from them in writing and see what happens :(

the up grading of turbo will be under the emissions area which is a item , any way go to Oh performance 186 mc intyre rd sunshine , they do one for you , im sure you have all your tyres and stuff ok , go and try them out , they have helped a lot of guys out ,

LOL, by 'them' you mean you? ......right? nice plug

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
    • Quick side trip into the engine externals, alternator and PS were in place including tensioned belts, but the PS was dry (my guess is he had the steering rack reco-ed). Filled it up with Transmax Z but it will need more bleeding once the engine is running no doubt. BTW I've said before, I don't know what kind of soft animals you have in the city, but out here they breed the rats tough. I bet they were disappointed when they tasted synthetic ATF.... Coilpacks are Splitfires with a factory loom in reasonable condition. I didn't pull one put I bet the spark plugs are new as its a new engine
    • Onto intake pressure test. I have a Raceworks (damn brand thieves!) pressure test adapter that lets you apply pressure through a standard tyre valve and comes with a pressure gauge.....I just blocked off the other end immediately before the throttle body. Applied 30psi....and the turbo intake immediately popped off with a bang. Sorted that but it was still leaking, turns out there is a pinhole leak at the BOV adapter that I'll have to find a local place to TIG up. I'm sure it makes SFA difference with such a small leak but I want it to be right. Everything else up to the throttle body was good. Also cleaned and oiled the KNX cone filter, and this is the AFM if anyone can identify it (car runs a PowerFC)
×
×
  • Create New...