R33 Diagnostic Test

[FAT_3L]

just a quick q?

i did a diagnostic test on my r33. everything came up all ok. but i read the skylines the limit book which said when ur done turn ignition off and put ecu back to normal. now mine has only 2 modes, so 1 light.

i turned the ignition off but havent moved the screw yet and dont wanna leave it in diagnostic mode!

how do i know when its back to normal??

thanks

[PsYLoR]

I think you just put the screw back to where it was (counter clockwise) then turn the ignition off.

Ive forgotten cuz i have a PFC now but i think you.....

Turn ignition on, then turn the screw on the ECU clockwise wait a few seconds then turn the screw back (counter clockwise)

read the code that it flash's (hopefully 55) then turn ignition off.

Everything should be back to normal & ECU is reset. start car to check, then go for a very spirited drive so the ECU can advance timing to suit your driving.

[FAT_3L]

no dramas mate, i did that so al good.

Thanks