Jump to content
SAU Community

Micks Metal Craft

cul202

By cul202,
in Engines & Forced Induction

 Share

Recommended Posts

Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi cul202, Mick welds a bit of pipework for us, good work at reasonable prices. Can be a bit late at times, but he is very popular so can get very busy.

For a higher quality job, at a higher price of course, try Performance Metalcraft at Rydalmere. Their stuff is top shelf, good to deal with as well.

Hope that helps

Link to comment
https://www.sau.com.au/forums/topic/27394-micks-metal-craft/#findComment-574986
Share on other sites
JimX Grand Master

JimX

Posted
Posted

My cooler was made by Mick's Metalcraft and I can't really fault it. Looks nice and shiny, doesn't have any noticable pressure drop, but that could just be a wide margin of error in my Autometer gauge. A setting of 1 bar on my EBC (which I think gets pressure reading from before cooler) reads about spot on 15psi on my boost gauge, which is actually higher than it should be.

Yes there are better coolers, but I think it was really good value for the price. Can't remember the exact pricing because it was bundled in with lots of other work, but I think it was just under $1000 (600x300x75).

Link to comment
https://www.sau.com.au/forums/topic/27394-micks-metal-craft/#findComment-575014
Share on other sites
cul202 Experienced

cul202

Posted
  • Author
Posted

cheers people. i got a 34tt cooler for my 32 and need a pipe cut off and put on the other side... hopefully for around $50 or so

ps before i get called a fool i didn't want to go a big f/mount and these supposedly flow 60%+ more that the stocker

Link to comment
https://www.sau.com.au/forums/topic/27394-micks-metal-craft/#findComment-575110
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Best Skyline ever

      By PranK · Posted

      But, do I have to? 😬
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      While doing my tailgate struts I found some rust. Also replaced my bonnet struts. Such a cool satisfaction with that job.
    • PranK
      Should I use rust converter on this?

      By PranK · Posted

      So I removed as much as I could from both sides. The shop vac did a great job of clearing 99% of it. I got it all as clean as I could and then absolutely drenched the whole lot in the rust converter. Tonight or tomorrow I'll hammer it again. The cavity must be close to 400mm in length and surprisingly I was able to get it right to the back.  I'll quickly reassemble and then pretend I never saw it. I'll post pics (for me to ignore later) soon.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Yea she is a hoot to drive 
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for~?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate almost all modern cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
×
×
  • Create New...