Jump to content
SAU Community

R32 Gtr Heavily Modified!

gtrkid123
 Share

Recommended Posts

gtrkid123 Enthusiast

gtrkid123

Posted
Posted

1989 R32 GTR including new paint engine build and gearbox build up 80,XXX k's since full rebuilt

The list:

Forged Engine

CP Pistons

JUN Oil Pump

SARD 700cc Injectors

N1 Water Pump

Oil Drain Added To The Rear Off The Head Back To The Sump

TOMIE Oil Feed Restrictors

TOMIE Sump Baffles

HKS Adjustable Cam Gears

Apexi Cams

ACL Race bearing Throughout

ARP Mains + Head Studs

TOMIE Head Gasket

HKS Timing Belt

All New Hoses And Gaskets

Also In The Bay

Oil Relocation Kit + Cooler

After Market Radiator,

After Market Cooler Piping And Radiator Hoses,

Nismo Airflow Meters,

K&N Panel Filter In Standard Airbox

New O2 Sensors

Huge 600x300x120mm Intercooler,

Garret -5s Capable Of 430+ rwkw

Gearbox Was Completely Reconditioned

Including Syncros 2/3/4/5

3/4

Every Seal And Bearing Has Been Replaced

RECENT RETUNE USING NISSTUNE 03/06/09

341rwkw on 18 psi now, on a safe tune

DYNO PAPERS PROVIDED

Other Parts Changed Out:

New Coil Packs

The Altessa Pump Changed

Hicas Lock Bar Added (Rear Powersteering Pump Impeller Taken Out To Completely Disable It But Still Keeping The Cooler)

Bilsteine Coilovers All Round.,

Very Good Condition R32 GTR Wheels

D-speed Clear Indicators,

Front + Rear Sway Bars Also One In The Middle Of The Car.

Torque Split Controller Added With a 2wd/4wd Switch (In The Console)

Boost Controller Hidden In Fuse Box.

I Am Selling My R32 GTR Because Im Going Oversees At The End Of This Month...

PRICE 24k

There Is 11 Months Rego On This Car And Will Come With RWC...

Cheers, Taner 0403172796

post-62664-1244550833_thumb.jpg

post-62664-1244550855_thumb.jpg

post-62664-1244550884_thumb.jpg

post-62664-1244550921_thumb.jpg

Link to comment
Share on other sites
xthommox Enthusiast

xthommox

Posted
Posted

This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

Link to comment
Share on other sites
gtrkid123 Enthusiast

gtrkid123

Posted
  • Author
Posted
Who built the motor? Do you have reciepts. Were you the owner who built the car or was it the previous owner?

Genuine buyer, its just that the colour looks familiar.

Cheers

You can pm me if you prefer

hey man, the previous owner was peter...

the engine was built by him and john at ices performance in rowville.

the only reason why im trying to sell the car is because i need the money as im going oversees and to buy 2 cars for myself and my brother.

im barely on SAU so just call me if you have inquiries dont email me...

my number is 0403172796 or my brother 0423350450

Link to comment
Share on other sites
gtrkid123 Enthusiast

gtrkid123

Posted
  • Author
Posted
This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

i havnt recieved any emails from you...

Link to comment
Share on other sites
xthommox Enthusiast

xthommox

Posted
Posted
i havnt recieved any emails from you...

Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

Link to comment
Share on other sites
xthommox Enthusiast

xthommox

Posted
Posted (edited)

To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

Edited by xthommox
Link to comment
Share on other sites
gtrkid123 Enthusiast

gtrkid123

Posted
  • Author
Posted
Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

yes i wanted to sell it to go oversees so i have money to spend from my half of the money that i recieve...

and then the left over i can buy another cheap car!

Link to comment
Share on other sites
gtrkid123 Enthusiast

gtrkid123

Posted
  • Author
Posted
Ice Performance where in Cheltanham, not Rowville, there was no John there, just a Greald and Nigel, I know because they built 2 engines for me and are friends.

Cheers for the help anyway, I guess you dont know much about the engine.

Good luck with the sale buddy.

i think youve got the wrong one.

ice performance and ices performance are different...

Link to comment
Share on other sites
gtrkid123 Enthusiast

gtrkid123

Posted
  • Author
Posted (edited)
To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

ahh thanks for the info =)

i dont know much about peteshistory but its good to know now he use to work at ice.

Edited by gtrkid123
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Roy
      R32 GTS/GTST non driven wheel speed

      By Roy · Posted

      Another complicated thing is to run Z32 alloy hubs which have wheel speed sensors for ABS. You need different tie rod end, and you need new bearings on the upright etc. I did that as part of a major refresh when my front kingpin bearing flogged out., Alloy was a little lighter, runs a bigger bearing , gives a few extra mm in wheelbase as it moves the wheel forward in the arch (cant run crazy but can still get 8ish comfortably).   All in all glad I did it but was a head fark as tried it once and abandoned it the first time. sav man swung his spanners at it and got it working so using his guidance on GTR/Z32 tie rod ends etc and the required mismatch of parts was able to make it work.  Probably a 2k upgrade all said and done :(   I think the best bet is just look around your front wheel and see what you can pick up rotationally. You see old Escorts, E30s etc all get very creative with front uprights and the humble old angled alloy bracket.
    • Butters
      Garrett G-XRace Range

      By Butters · Posted

      Big claims here.  Any links up on the website ?   
    • Butters
      RB gearbox options

      By Butters · Posted

      If your HP goal is reasonable and you are not drifting. Buy a new R34 box.  If the above is not true, buy a wrecked R33 box and put a gearset in it.  CD09 are not as strong as you think and the cost of / mess around of the conversion puts you in gearset territory.    Also the deal above is awesome,, get that  
    • dbm7
      Got this r31 silhouette flood car to rebuild.

      By dbm7 · Posted

      Just got back from a little hands-on with a G58 Baron....I was thinking about this... ..best I can figure it, that pinny was tail-ended ...I didn't really think about the wiring, because all that mattered was the tank and pump cradle (I think I mentioned the pump itself I couldn't vouch for)...which didn't matter, as you said you'd be replacing the pump anyway.... ...'for some reason'....and I imagine this is the panel shop's doing... they've replaced the cradle wiring with a metre of 7-core trailer loom, and attached the loom plug (from a different car) to that. The actual cable run from the top of the pump cradle, to fuel pump harness end in boot, is maybe 60cm in length...so I've no idea why they did this... ....the connector in the boot of the pinny, is not going to help you here...because in theory, it should still be present on your car. On top of that, because they've done what they did, we have no idea which colours of the trailer cabling, have been connected to what on the fuel pump cradle (pump +/- , shield, fuel guage/low-level senders)... ...this means, best approach is to remove the pump cradle, and re-work it now ...not later. That is, if you were going to replace the pump, do it, replace the soft lines at the same time...and sort the wiring out (replace that trailer cable with the wiring loom off your old cradle)...
    • GTSBoy
      Fake ARP bolts?

      By GTSBoy · Posted

      Well, maybe not. The main feature of Chinese manufacture seems to be incredibly variable quality, coupled with an apparent willingness to find a way to see even the stuff that fails QC. So the military could still take the cream of the production run and somehow sell the "sellable but not really useable" stuff to the stupid round eyes on the other side of the world.
×
×
  • Create New...