Jump to content
SAU Community

Recommended Posts

1989 R32 GTR including new paint engine build and gearbox build up 80,XXX k's since full rebuilt

The list:

Forged Engine

CP Pistons

JUN Oil Pump

SARD 700cc Injectors

N1 Water Pump

Oil Drain Added To The Rear Off The Head Back To The Sump

TOMIE Oil Feed Restrictors

TOMIE Sump Baffles

HKS Adjustable Cam Gears

Apexi Cams

ACL Race bearing Throughout

ARP Mains + Head Studs

TOMIE Head Gasket

HKS Timing Belt

All New Hoses And Gaskets

Also In The Bay

Oil Relocation Kit + Cooler

After Market Radiator,

After Market Cooler Piping And Radiator Hoses,

Nismo Airflow Meters,

K&N Panel Filter In Standard Airbox

New O2 Sensors

Huge 600x300x120mm Intercooler,

Garret -5s Capable Of 430+ rwkw

Gearbox Was Completely Reconditioned

Including Syncros 2/3/4/5

3/4

Every Seal And Bearing Has Been Replaced

RECENT RETUNE USING NISSTUNE 03/06/09

341rwkw on 18 psi now, on a safe tune

DYNO PAPERS PROVIDED

Other Parts Changed Out:

New Coil Packs

The Altessa Pump Changed

Hicas Lock Bar Added (Rear Powersteering Pump Impeller Taken Out To Completely Disable It But Still Keeping The Cooler)

Bilsteine Coilovers All Round.,

Very Good Condition R32 GTR Wheels

D-speed Clear Indicators,

Front + Rear Sway Bars Also One In The Middle Of The Car.

Torque Split Controller Added With a 2wd/4wd Switch (In The Console)

Boost Controller Hidden In Fuse Box.

I Am Selling My R32 GTR Because Im Going Oversees At The End Of This Month...

PRICE 24k

There Is 11 Months Rego On This Car And Will Come With RWC...

Cheers, Taner 0403172796

post-62664-1244550833_thumb.jpg

post-62664-1244550855_thumb.jpg

post-62664-1244550884_thumb.jpg

post-62664-1244550921_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/274000-r32-gtr-heavily-modified/
Share on other sites

Who built the motor? Do you have reciepts. Were you the owner who built the car or was it the previous owner?

Genuine buyer, its just that the colour looks familiar.

Cheers

You can pm me if you prefer

This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

Who built the motor? Do you have reciepts. Were you the owner who built the car or was it the previous owner?

Genuine buyer, its just that the colour looks familiar.

Cheers

You can pm me if you prefer

hey man, the previous owner was peter...

the engine was built by him and john at ices performance in rowville.

the only reason why im trying to sell the car is because i need the money as im going oversees and to buy 2 cars for myself and my brother.

im barely on SAU so just call me if you have inquiries dont email me...

my number is 0403172796 or my brother 0423350450

This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

i havnt recieved any emails from you...

i havnt recieved any emails from you...

Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

Ice Performance where in Cheltanham, not Rowville, there was no John there, just a Greald and Nigel, I know because they built 2 engines for me and are friends.

Cheers for the help anyway, I guess you dont know much about the engine.

Good luck with the sale buddy.

To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

Edited by xthommox
Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

yes i wanted to sell it to go oversees so i have money to spend from my half of the money that i recieve...

and then the left over i can buy another cheap car!

Ice Performance where in Cheltanham, not Rowville, there was no John there, just a Greald and Nigel, I know because they built 2 engines for me and are friends.

Cheers for the help anyway, I guess you dont know much about the engine.

Good luck with the sale buddy.

i think youve got the wrong one.

ice performance and ices performance are different...

To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

ahh thanks for the info =)

i dont know much about peteshistory but its good to know now he use to work at ice.

Edited by gtrkid123

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not wrong, but more than a few times I've heard of people running into issues where their injector characterization isn't quite right and that approach works for that specific configuration but once they switch over to a new set they discover a whole bunch of stuff wasn't set up correctly. It's slightly more annoying to reverse engineer the OEM MAF transfer function but you already have the sensor wired up to the factory harness so keeping it around for a few weeks more while you figure out the tune is easy enough. I've seen GM also use a combination of both MAF + MAP in their ECUs before, MAF is for steady state and a calculation of the cylinder VE to correct the base VE table, then in transients it uses that calculated VE + raw MAP to determine cylinder filling somehow.
    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
×
×
  • Create New...