Jump to content
SAU Community

Rays Te37 18x9.5 +15 Bronze Gtr Fitment Yo!

flyz33
 Share

Recommended Posts

flyz33 Rising Star

flyz33

Posted
Posted (edited)

Hey guys,

I have decided to test the waters to see if there will be any takers for my TE37. I purchased these puppies from mxfly off these forums about 1.5 months ago. My car is pretty much a weekend car so i havnt put much kms on these wheels since i bought them. The wheels are in excellent condition i would even dare say mint condition, but one of the wheels has a small 1cm gutter mark!! :mad:

As some of you in the hunt for wheels would know due to our dollar against the yen to buy anything decent would cost an arm and a leg. It took me ages to find something nice that would pop up. So if your interested in these be quick!!! I can help ship these interstate and from past experience it would cost roughly $60.00 bucks to ship this to either Melb or Brissy. For other states please pm me.

If you have any question please do not hesitate to contact me.

Specs:

18x9.5 +15 (Bronze in color)

Bridegstone Potenza RE001 265/35/18 (70-80 per cent tread)

Price: $3800 Neg

Location: Western Sydney

Contact: Via PM or 040337740

P1018581Small.jpg

TE37.jpg

post-a214464-IMG-2194-resize.JPG

post-a214465-IMG-2200-resize.JPG

Edited by flyz33
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Fake ARP bolts?

      By TurboTapin · Posted

      Yes sir, that was me. Fake ARP's are also a thing over here in Canada and we only order from reputable dealers. It's sad that even simple things like bolts and hoses are now also being copied... anything to make a dollar.  Story time. Like all cheap crap from China, it's even an issue with firearms. Roughly 15 years ago, I purchased a new cheap Norinco 12g shotgun. First time out in the bush with it, while firing, bolt assembly didn't lock and it fired out of battery. The receiver also being cheap steel, basically exploded in my face. I was lucky to be wearing eye protection. Long story short, don't buy Chinese junk. Also Norinco being state run and their only military arms producer, if ever they do try and take over a country, don't worry about it lol. 
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      Newcastle NSW
    • ck_chino
      Nismo copper mix twin “pull” pedal height engagement

      By ck_chino · Posted

      Installed  Nismo coppermix twin competition spec last year in my bnr32 with pull trans with Oem slave cylinder. The point at where the clutch disengages/enages is right at the top of the clutch pedal, meaning I barely have to push the pedal down for the clutch to be disengaged.  You guys that have the same combo are you experiencing this high pedal bite point??   Secondly I’d like to have the disengagement point lower meaning I have to push the pedal more(further not effort)for it to be disengaged.  I’m thinking to use a Nismo big operating cylinder(bigger bore at 13/16 vs Oem 3/4) which will require more pedal stroke to get the equivalent movement at the clutch fork. But I see Nismo web site says not to mix these 2 as the Nismo big operating cylinder doesn’t have enough stroke to disengage??? Any folks run both the coppermix twin pull with Nismo cylinder??    Thanks in advance for the replies but prefer only guys with pull clutches to respond. thanks     
    • Watermouse
      RB gearbox options

      By Watermouse · Posted

      Any chance u could let us know where your based ?
    • rbs30
      RB gearbox options

      By rbs30 · Posted

      That’s a great deal and I would jump on it if you were closer. Melbourne is a bit of a hike for me though unfortunately 
×
×
  • Create New...