Jump to content
SAU Community

Recommended Posts

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4653954
Share on other sites

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654000
Share on other sites

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Thanks for the backup =D

But yeah there are any number of reasons it could be like that.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654161
Share on other sites

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

yes thats pathetic

theres a black R34 GT-T with a GT-R badge at the boot

the whole car looks nothing like a GT-R

to me thats degrading the GT-R image

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655374
Share on other sites

good luck fitting the wheels!

anyway, VERY nice car Andy. wish i could afford one myself!

Haha, nah, it's a little joke between Andy and I. Told him not to put crappy wheels on the GTR! We know each other because of our STi ownership (ex for me).

From what he told me, the diffuser was stolen in Japan, and he's ordered a Top Secret diffuser as a replacement. The abscence of the carbon bonnet is a mystery..

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655530
Share on other sites

i was thinking more along the lines of the STi being 5x100 and they actually wouldnt fit the GTR :P

+1 for who cares about where the parts have gone. he is happy, thats all that matters!

exactly right.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4656157
Share on other sites

  • 2 weeks later...

Andy sent me a couple of pictures of his car, and i noticed something strange:

getattachmentrmn.jpg

His rear diff doesn't look like mine. Is it possible that his car is a non Vspec (without active diff)?

We're just trying to work out which exact model his car is. Is has Vspec II interior, but no bonnet or diffuser. Also his MFD doesn't display intake and exhaust temp, which i believe is featured on Vspec's...Hope i'm wrong for his sake!

Edited by Huy
Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4685429
Share on other sites

looks like it is not a v-spec II, the black interior is shared between the standard and v-spec II models from october 2000 onwards as are the N1 rear disc rotors so this is not really a way to tell the difference ,the MFD should have 7 parameters for a v-spec/v-specII/m-spec where as the standard model eg non v-spec will only have 5 parameters also check the tacho the 1 to 3 on the v-spec models will be compressed this is if it is the orginal speedo ,you can also check the code on the build plate look at the 6th letter it should start with GGJPRW the W means its a v-spec/v-spec II etc if it has a V instead of the W it is a non v-spec model

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4688184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The car revs up through the gears much better/faster now, and fuel consumption doesn't really seem to have be affected either on a Hwy cruise, which wasn't expected  The FAB9 intake manifold has been problematic sourcing though, I've contacted Plasmaman to ask about their intake, which you can get different runner lengths spec'd, and, their different options for throttle bodies  The only real physical drawback with the Plasmaman intake is how to connect it to my current OEM style airbox, as FAB9 make a OEM style back half of the airbox to suit the larger diameter throttle body, and all that is required is a 30°bend silicone pipe to mate the throttle body to the airbox Car also goes in for some exhaust work in a week or so to fit the biggest resonator they can fit clearance wise in the front pipe to help remove some of the drone, there isn't alot of realestate under there, a rough guesstimation is it will only be about 3-400mm long and maybe 90-100mm diameter, and with a 60mm exhaust that doesn't leave alot of space for the internal volume of the resonator to do its thing I'm thinking I may need to bin the "high flow" 100 cell cat for something a bit more substantial, yeah, and restrictive, like a 200-400 cell, to help, but, I have ample room for a really large bodied cat to replace the current one which has around a 4" diameter body I may look around in the recycling bins and see if I can find a massive newish cat that was "replaced" with some new full exhaust system that the local exhaust shop in Western Sydney is doing
    • Hahah look at that smile 😂 Just like those ones on IG where they compare the husband in family photos vs husband going fishing lol. I don't think I'll participate this time, clutch isn't in and also the last time I went there were too many numpties on the cruise sessions. Nearly caused a few accidents holding up people and a few guys initiating massive kerb to kerb drifts with heaps of cars right behind them. Not to mention, there were guys on the track session using it as a power cruise session.
    • Is there an actual website thingie for peoples who don't have Facebooks? Cheers
    • All Jap Day is coming up again! 13th of July this year. Are you going? Tickets go on sale on Wednesday 6pm. Please let Quang know as well. https://m.facebook.com/photo.php?fbid=1163155775853542   I still get shit from my wife for this photo because it is the happiest she has ever seen me. And it's not with her, it's in someone else's car.   Quang's EVO is sick, but that rotary wagon flying past was absolutely bonkers.  
×
×
  • Create New...