Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Yep agree with INVERTD. You may be able to chase it up via TPA...section 53 i think..

- '(aa) falsely represent that services are of a particular standard, quality, value or grade'

And what does Nissan say about the "Quality of the Leather" on the R35?

Even a $66K WRX STi is advertised as having "high quality Alcantara leather"

I think I have the solution, find 200-300k cash (what you might have saved on a Porsche turbo or Ferrari) and either spend it on getting the car where you want it standards wise or buy something nice for your misses, you might get lucky and relax a little!

Just kiddin buddy. I too have noticed the difference in fit and finish to my 540i, the car more than makes up for it in bang for your buck though. You are paying for R and D, techno wizardry and not paying much for it compared to it's competitors. Go track the car so you and it can bond a little

You are probably right. I have an E55 AMG with beautiful Nappa leather and gorgeous birds' eye maple interior and now want to repeat the experience. Silly me.

I am very happy with 95% of the GT-R interior as exactly what I expected, if only they hadn't inserted that freaking off cut where I can see it!

You are not wrong with the 997 Turbo either. I actually walked away from buying one at the last minute to get this monster! That 250K saved is very nice, thank you Nissan.

I will be tracking this baby just as soon as I get my first service done next week and the Ozicozi clear film goes on the front. Those flying pebbles at Eastern Creek can really sand-blast the paint.

We will bond for sure. Thanks, mate.

Edited by GT-Ricer
  • 2 weeks later...

that does look pretty average. the 3 jdm cars I had were no where near that bad. 1 07 model and 2 early 08 models. maybe they are less worried about small export markets than their own domestic customers... the adm cars I've looked closely at were not as bad as yours either. I'm sure even if their average is not exactly ferrari grade they can still do better than what you have and should definitely provide you with 2 new front seat covers at their expense.

it's also a bit odd how in their email they say that being a natural product it has blemishes, defects etc. then in the next paragraph they state that is has no defects...which is it?

that does look pretty average. the 3 jdm cars I had were no where near that bad. 1 07 model and 2 early 08 models. maybe they are less worried about small export markets than their own domestic customers... the adm cars I've looked closely at were not as bad as yours either. I'm sure even if their average is not exactly ferrari grade they can still do better than what you have and should definitely provide you with 2 new front seat covers at their expense.

it's also a bit odd how in their email they say that being a natural product it has blemishes, defects etc. then in the next paragraph they state that is has no defects...which is it?

Some people think that saving face means not admitting they've made a mistake. On the contrary, dealing quickly with this festering sore will give them a lot more credibility than pretending the problem

does not exist. I am not going to just fade away, am I?

As to natural products, there are many natural products out there but few of them are fit to be used in high-end sports cars interiors.The statement is patronising to say the least, as if I hadn't had leather seats, all of them of better quality, in every car I've owned in the past 25 years.

I would be pissed about this. As has been said, there are Fords and Holdens with better quality leather. Judging by your photos, this is what I imagine pleather must look like after 10 years of wear. Please continue fighting this!

I do feel, however, that the expectation is there. I'm surprised we haven't heard more complaints about the quality of materials etc. used in the R35. Afterall, this car was meant to be the "affordable" supercar and you can be sure that every cost cut possible (bar the engineering side of things) would have been made in its production to make the car viable. Regardless, any car costing 170k should not have seats with a material that would make you consider vinyl as a better alternative :P

P.S. In the patronising manner it is written, it wouldn't surprise me if the customer service reply you got came straight from a template/mail-merge with your name inserted in the fields. Standard, typical, hope-you-go-away-after-reading-this response.

Edited by Birds
What I don't get is, the difference in quality between the 2 panels where you have your thumb pressed down.. They should be identical..

This is obvious to everybody except Nissan Australia and Nissan Japan... it is a natural product, you know...! :)

And LOL @ natural product. So I guess they just dug the rest of the R35 out of the ground too. Is "natural product" the new word for not covered by warranty? Perhaps they were aiming for that "imperfection is perfection" philosophy?

I can tell you for certain none of the R35s i imported had leather looking anything like that. they were all fine.

Yes, but they were all JDM, not the stripped down ADR versions. Maybe the Japanese consumers are more demanding and not as gaga-eyed over the GT-R as Nissan presumed the Australian buyers would be after all these years in the wilderness since the last GT-R disappeared from our market?

Well as i said from day 1, we were gonna get detuned versions of the GTR and the warranty and service from Nissan wont be worth spit but i got shot down by a few guys for saying it.Looks like i was 100% correct

GT-Ricer :Mate i would seek immediate advice from a solicitor and dont bother talking direct to Nissan, you have to start acting like a flamin mongrel about this for anything to happen, Good luck, i hope you get it repaired at Nissan AUS expense.

edit:(LOL i didnt use flamin mongrel i used the C word, thanks SAU swear detector)

Why does the R35 sound so much like a used car?

:P

New from Nissan in 2010...the "Previously Owned" (dodgy-dealership, worth-less-than-the-paper-it's-written-on-warranty included).

The internet is a wonderful place. A couple of complaints on an aussie forum and suddenly all the thousands of owners have been spoken for worldwide and the car is deemed worthless.

Don't worry Birds, the car is awesome.

Finding a defect on my 175k Nissan doesn't hurt as bad as a 450k Lambo owner breaking a cheap plastic dash switch for the first time.

lots of theories here. Just a bad batch of leather. At the end of the day to retrim outer edge of the seat in leather will cost at MOST $2,000?. When I was selling cars you could retrim 4 seats in some very nice Howe leather for that kind of money. $2K in leather can save a WHOLE LOT of headache for all involved. You wonder why, on a flagship car Nissan couldn't just bite the bullet. A local motor trimmer can do a great job with great leather at what amounts to as a drop in the ocean for a big company.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...