Jump to content
SAU Community

Recommended Posts

Hey guys,

I'm interested in various people's opinions on the ultimate set up for the 'standard GTR' track day class.

Drawing your attention to:

Standard Class:

(List of Free Mods allowed in standard class)

Suspension - All

Brakes - All

Electronics (ECU, Boost Controllers) - All

Intercoolers - All

Pods

Wheels Sizes

Modified Classes:

(Any of these Mods will put you into modified class)

- R Spec Tyres / Slicks under a UTQG rating of 100 tread wear (not including 100)

- A Roll Cage

- A stripped interior. Removal of rear seats only is allowed.

- Any other major weight reduction such as fibreglass doors or perspects windows

- Fuel Systems - Any two out of the following four modifications to either: 1.Injectors, 2.Fuel Pump, 3.Non Nissan OEM Turbo's, or 4.A fuel pressure modification will put you into modified class. (I.E - Only one fuel system mod is allowed)

- Non OEM Engine Capacities (GTST with RB26, RB30; GTR with 2.8L, etc)

(GTR Standard Class)

Any of these turbo's are considered a standard spec replacement turbo and are not considered a turbo mod.

R32, R33, R34 N1's, HKS GT-SS's, Garrett GT2860r-7.

My guess is that you would choose the turbos with the most low down response / linear power delivery, that max out close to the limit of the standard injectors combined with an upgraded fuel pump (approx 280RwKw?)... ie standard R34 turbos??

Not much need to replace the standard cooler at this level of tune I'd imagine. And not much need to get an electronic boost controller, just remove the brass boost restrictor?

Edited by bonestorm007

Ok the first question; how big is the budget?

You will get a heap of different responses here, it really is a can of worms you've opened. For example i have a built RB2630 with HKS GT-RS's, love everything about it. I dislike -7's. Someone else may love -7's but dislike RB30's and/or GT-RS's :P

I've got Falken RT 615 semi slicks, braided lines, ferodo pads, new clutch, hard pipe kit, 6K worth of suspension mods.

Couple of issues I wanted to generate some discussion on. Ie choosing a good setup... within the mentioned rules.

GTRS's are not allowed, you have to choose the turbo from the list. But what is the point in going for a larger turbo like the gt SS or garret 2860-7's when you are limited by fuel Supply? The rules say you are only allowed one fuel mod. Ie either injectors OR fuel pump. I figure the most you can safely get would be around 280rwkw by upgrading the pump.

I figure power FC, fuel pump, R34 GTR turbos would be a good combo within these prescribed rules.

Other opinions?

Slimjd - in the interest of sportsmanship, you dont cheat. Its a club motorsport class.

Anyway... you could always just ask SAU-Vic members who are currently in, or have been in, that class... being its the Vic Motorsport class your talking about :P

Some of them have been going around in circles for a few years and probably already have a pretty good idea of what makes a GTR fast in Standard Class.

If you understand GTR's Luke, you can get to 330rwkw easily within the restrictions, however can you use that much power on street rubber and be fast? :)

Being you are on street tyres, you are better off getting suspension and brakes, complemented with the best tyres you can buy rather than chasing the power... that would come 2nd being you need to get used to the car for a season or two anyhow. You'll want to consider turbos as well. Pushing GTR turbos (stock ones) @ the track is a very bad idea. Less emphasis on the power either way.

Slimjd - in the interest of sportsmanship, you dont cheat. Its a club motorsport class.

Anyway... you could always just ask SAU-Vic members who are currently in, or have been in, that class... being its the Vic Motorsport class your talking about :P

Some of them have been going around in circles for a few years and probably already have a pretty good idea of what makes a GTR fast in Standard Class.

If you understand GTR's Luke, you can get to 330rwkw easily within the restrictions, however can you use that much power on street rubber and be fast? :)

Being you are on street tyres, you are better off getting suspension and brakes, complemented with the best tyres you can buy rather than chasing the power... that would come 2nd being you need to get used to the car for a season or two anyhow. You'll want to consider turbos as well. Pushing GTR turbos (stock ones) @ the track is a very bad idea. Less emphasis on the power either way.

Good advice there. you need to stop dispensing so much of it, poor young thing i am, theres only so much awe i can produce :banana: lol i kid i kid...sounds good though.

So i'm gonna say. yeah. what he said ^

Thanks for the great advice guys.

Had my first track day at Sandown a few weeks ago and loved it (apart from hitting 180km speed limiter half straight). Definately keen just to enjoy my car in its current light tune for the moment, and improve my driving.

In the future though, sounds like a new stock fuel pump, injectors, 2860-7's, and power FC would be a good combo.

Direct deposited my skyline club membership fee today, hopefully can still sign up for the winton track day in early July!

Anyone else going?...

Cheers,

Luke.

Thanks for the great advice guys.

Had my first track day at Sandown a few weeks ago and loved it (apart from hitting 180km speed limiter half straight). Definately keen just to enjoy my car in its current light tune for the moment, and improve my driving.

In the future though, sounds like a new stock fuel pump, injectors, 2860-7's, and power FC would be a good combo.

Direct deposited my skyline club membership fee today, hopefully can still sign up for the winton track day in early July!

Anyone else going?...

Cheers,

Luke.

I might come. To watch =b

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...