Jump to content
SAU Community

R33 S2 & R32 Parts

s13silvianissan
 Share

Recommended Posts

s13silvianissan Enthusiast

s13silvianissan

Posted
Posted

i am cleaning out the shed, if i find more parts lying around i will list them here.

Rb20det- $200, i bought this engine 3 years ago to rebuild, when i got it the head was seperated from the block due to a blown head gasket, it has no turbo, wiring, ecu, altenator, aircon pump or power steering pump. the engine is now completly in pieces, and has been stored in cardboard boxes for the last few years.

R33 S2 doors- $200 pair

standard R33 front struts- $80 pair

standard R33 front sway bar- $50

R33 S2 front guards with indicators- $200 pair

R32 front guards- $120 pair

R33 glovebox- $40

R33 aircon/fan/heater box- $50 ea

R33 steering column- $50

r33 S2 rear quater interior trim- $100 pair

r32 rear quater interior trim- $50 pair

R33 S2 door trims- $150 pair

R32 fmic with pipe kit- $150

R33 front hubs- $100 pair

full set R33 seat belts- $150

R32 side mirrors- $100 pair

R32 glovebox- $40

R32 indicator stalk- $30

R32 bonnet hinges- $40

All prices are neg.

I can post smaller parts at buyers expense.

bigger items are pick up only from Woodville, nsw, 2321-10mins from maitland.

Link to comment
https://www.sau.com.au/forums/topic/274459-r33-s2-r32-parts/
Share on other sites
s13silvianissan Enthusiast

s13silvianissan

Posted
  • Author
Posted
r32 rear quater interior trim- $50 pair

wot sort of condition are these in?? are these upper trims??

they are the lower trims, each side of the rear seat, excellent condition

What colour & condition are these in?

passenger side has a small scrape, will need minor repair, drivers side is good, they are black

s13silvianissan Enthusiast

s13silvianissan

Posted
  • Author
Posted

i also have a r32 rear subframe, it is complete minus diff and calipers. $300 ono or pm me for individual part prices.

R32 manual conversion parts-no gearbox or tail shaft, $150 ono

my number is 0411553427

Thanks,

Brock

Lex469 Enthusiast

Lex469

Posted
Posted

R33 S2 doors- $200 pair

R33 S2 front guards with indicators- $200 pair

R33 steering column- $50

R33 S2 door trims- $150 pair

hey bro what colour are the front panels and if i buy most of this stuff how much off each item are you willing to drop off it. Cause i only really need silver fron right and door right panels.

hit me back

s13silvianissan Enthusiast

s13silvianissan

Posted
  • Author
Posted
What colour are you r33 S2 doors in? im after the passenger door.

hi mate,

doors are white

send me your email address if you want pics.

Hey mate do you have the drivers side seatbelt available?

Cheers

pm sent

s13silvianissan Enthusiast

s13silvianissan

Posted
  • Author
Posted

i have decided to sell the engine in seperate pieces.

everything is there,

crank, rods, pistons, cam shafts, cam gears, lifters, injectors, manifolds, sump, block, head with valves, there is a altenator and air con compressor, standard intercooler pipe with BOV. COMPLETE engine in pieces.

i can post anything under 20kg's at buyers expense

pm me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Does 98ron contain ethanol?

      By Dose Pipe Sutututu · Posted

      I remember the days when E85 was priced in according to the $ per km outcome. Sure E85 was about 35% cheaper, but you also lost about 35% range... now it's fked..
    • GTSBoy
      A little PU bush story

      By GTSBoy · Posted

      They do. The pale yellow translucent ones from Japan were .... I dunno. Useless? Whiteline and SuperPro are probably fairly similar. There's bound to be a range of different hardnesses amongst the dozens of options on the market. The simple fact is that the pineapples don't get up inside the bush at all. They just sort of exist in the space between the washer/bracket and the subframe's bush outer tube, and...exert a bit of force between them? Or something like that. I'm sure that with enough provocation, they will simply allow one to move wrt the other.
    • Kinkstaah
      A little PU bush story

      By Kinkstaah · Posted

      I'm not sure they came in different hardnesses? Going from memory only - I had set them up in the balanced setup. I also have poly bushes, so I have both poly bushes and pineapples. This is what my memory tells me at least. I'll have to take a look under there to be sure. The tramp was so bad that I managed to eject/kill a diff bushing, so those I know are stock. The tramp is bad enough that you are 200% sure you are doing severe damage to the car. It's not just chirping or vibration, it feels like you're hitting a speed hump/kerb 10 times a second. The issue has persisted between subframes! (I went from Hicas to non hicas subframe and replaced every bush a few years ago now) so I'm entirely lost. Every arm is factory.
    • Butters
      Need AC Compressor for R32

      By Butters · Posted

      Can recommend the Frenchys kit, been using it 2 years now with no issue, very happy with it.  Only thing for me was upgrading the thermo fan but I am super fussy on cooling.   Also interested in electric AC, partly for boot mount to have a clean bay and partly would love the idea of cooling off the car before i get in. The battery setup to do that might be tricky / expensive though.  Found this an interesting watch.    
    • The Bogan
      A little PU bush story

      By The Bogan · Posted

      I put Whiteline pineapples in my old 33, they came in a 6 pack of them, got rid of the axle tramp altogether, cheap, quick and easy install,  they were pretty solid units though...???high durometer???? and NVH was increased a fair bit How hard are the ones you installed?
×
×
  • Create New...