Jump to content
SAU Community

Recommended Posts

Hey everyone

i was looking into some clutches because mine has a bit off slip in it. I’m pretty sure its the clutch.. ill give you guys a quick scenario so then people can let me know defiantly if it sounds like the clutch is slipping.. For example if I’m at the light i have to take the clutch out a bit and then it doesn’t grip until the last moment and then grips…that’s the same as say I’m going around 60km/h in 3rd and then accelerate it doesn’t pull hard as it use to.

At the moment it has a heavy duty clutch but I’m not too sure what brand/model it is as it came with the car when i brought it.. at the moment I’ve got approx. 250 rwhp.. The question is what does every one think about the exedy 7056hdb (Heavy Duty Button Kit) clutch? i looked on the website and couldn’t find the rb20det engine under r32, so i rang up a local car shop and they gave me that part number..

I don’t mind if its heavy that’s cool, another question i had was would it put to much pressure on the stock rb20det gearbox?

Also another part that might be worth mentioning is that I do like to take it on the track once a month or so.

Besides that it’s just a Nissan skyline R32 gts-t with the rb20det and stated before has a stock manual box.

Thanks guys any help/input appreciated.. if any one is also using this clutch please feel free to let me know what you think off it.

Niran

Link to comment
https://www.sau.com.au/forums/topic/274460-exedy-7056hdb/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That’s a beautiful setup Tao, Have u done any development with the new Turbosmart 40mm electronic straight gate, especially in this G30 configuration?
    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
×
×
  • Create New...