Jump to content
SAU Community

Recommended Posts

If they made it so you could have 1000hp and make it realistic, it would suck for racing. 1000hp in a skyline would make boost high in the rev range so you'd find yourself have to drop an extra gear on some corners just to keep it on boost. That sort of poweris ok for drags but not that great for track work

Latest round of seasonal events is a bit stupid. Bugger all money or points. They are more like normal races in the game. There are 4 different race types (FF, FR, 4wd and ferrari - F1 cars). There are power limits on the first 3. Hope the ferrari races give better prizes than the ff ones.

Yep. It says that your car has no restriction on mods.

Let us know how you go with the Ferrari challenge. I hope the rewards are worth it - I don't fancy dropping 10 or 12.5 mil on a ferrari F1 car, only to get a few hundred grand as prizemoney.

It's around 133k per race in the Ferrari bit, they are tough though I tried 3 or 4 times this arvo with only traction control but I keep spinning out, I'll give it another few goes tonight but I think I won't be able to win without Skid Recovery on.

No more big prize money but finally somewhere good to race the F1 cars.

Edited by NISMATT
  On 10/02/2011 at 4:30 AM, mad082 said:

Latest round of seasonal events is a bit stupid. Bugger all money or points. They are more like normal races in the game. There are 4 different race types (FF, FR, 4wd and ferrari - F1 cars). There are power limits on the first 3. Hope the ferrari races give better prizes than the ff ones.

why did they stop the huge amounts of points and money..that was what made you keep going with aspec, otherwise your doing indy 200 laps over and over or laguna seca..

BTW, how long does the suzuka 1000 take in an x1, thats my next endurance race????

  On 10/02/2011 at 9:00 AM, mad082 said:

I'm about 2.5 million short of the 2010 f1, so i won't be doing those races

  On 10/02/2011 at 9:40 AM, boiracer said:

bought the formula GT recently...def cant afford a fezza F1 car. thats pretty fun to drive.

I have the F10 and the F2007 and am happy to lend them out if you guys actually do want to do the races, I just finished R246 and it was pretty fun though I ended up using skid recovery because I kept spinning out without it.

  On 10/02/2011 at 9:40 AM, boiracer said:

bought the formula GT recently...def cant afford a fezza F1 car. thats pretty fun to drive.

made the same mistake as I did- you get one of those from a gift car ticket >_<

I'd have over 16m CR if I hadn't bought that

  On 10/02/2011 at 1:28 PM, PM-R33 said:

I havn't played this game for months :(

Really should get back into it, just got over it so quickly pinch.gif

Same, I dont even really play A-Spec anymore, just leave my ps3 overnight on B-spec mode.

  On 10/02/2011 at 8:34 PM, sh@un said:

made the same mistake as I did- you get one of those from a gift car ticket >_<

I'd have over 16m CR if I hadn't bought that

really??? oh dam....at least i wont get as irate when i do win it then...lol

Bob's doing the 24h Le Mans right now :)

Pit strategy is pretty useless for such a race I just leave it on default.

yeah I remember the big lag you get with the 1100hp GTR's but that's the fun part, trying to catch it when the boost comes on tap :P don't need traction control :)

But even an R35 can't push that much out, and this is for the track. There's bolt on kits for every day driving that pull more than the 850 flywheel hp that's the max of the R35 tuning in GT5. I think it's more the case that they don't want someone with a 150k car beating the pants off the high end cars.

All 6 of my Bob's are now at Level 40. Next stop is to get the X1 over 100,000km. Quite close now, that thing has been so very heavily beat on.

Still waitng for the long-tail F1 GTR to show up in the UCD :rant: I've seen the Silk Cut le mans Jag twice now :( I hope i'm not missing something here, like your A-spec level needing to be 30+ or sumsing (doubt it though)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...