Jump to content
SAU Community

Gt5 Is Ready


bigslick
 Share

Recommended Posts

If they made it so you could have 1000hp and make it realistic, it would suck for racing. 1000hp in a skyline would make boost high in the rev range so you'd find yourself have to drop an extra gear on some corners just to keep it on boost. That sort of poweris ok for drags but not that great for track work

Link to comment
Share on other sites

Latest round of seasonal events is a bit stupid. Bugger all money or points. They are more like normal races in the game. There are 4 different race types (FF, FR, 4wd and ferrari - F1 cars). There are power limits on the first 3. Hope the ferrari races give better prizes than the ff ones.

Link to comment
Share on other sites

Yep. It says that your car has no restriction on mods.

Let us know how you go with the Ferrari challenge. I hope the rewards are worth it - I don't fancy dropping 10 or 12.5 mil on a ferrari F1 car, only to get a few hundred grand as prizemoney.

Link to comment
Share on other sites

It's around 133k per race in the Ferrari bit, they are tough though I tried 3 or 4 times this arvo with only traction control but I keep spinning out, I'll give it another few goes tonight but I think I won't be able to win without Skid Recovery on.

No more big prize money but finally somewhere good to race the F1 cars.

Edited by NISMATT
Link to comment
Share on other sites

Latest round of seasonal events is a bit stupid. Bugger all money or points. They are more like normal races in the game. There are 4 different race types (FF, FR, 4wd and ferrari - F1 cars). There are power limits on the first 3. Hope the ferrari races give better prizes than the ff ones.

why did they stop the huge amounts of points and money..that was what made you keep going with aspec, otherwise your doing indy 200 laps over and over or laguna seca..

BTW, how long does the suzuka 1000 take in an x1, thats my next endurance race????

Link to comment
Share on other sites

I'm about 2.5 million short of the 2010 f1, so i won't be doing those races

bought the formula GT recently...def cant afford a fezza F1 car. thats pretty fun to drive.

I have the F10 and the F2007 and am happy to lend them out if you guys actually do want to do the races, I just finished R246 and it was pretty fun though I ended up using skid recovery because I kept spinning out without it.

Link to comment
Share on other sites

bought the formula GT recently...def cant afford a fezza F1 car. thats pretty fun to drive.

made the same mistake as I did- you get one of those from a gift car ticket >_<

I'd have over 16m CR if I hadn't bought that

Link to comment
Share on other sites

Bob's doing the 24h Le Mans right now :)

Pit strategy is pretty useless for such a race I just leave it on default.

yeah I remember the big lag you get with the 1100hp GTR's but that's the fun part, trying to catch it when the boost comes on tap :P don't need traction control :)

But even an R35 can't push that much out, and this is for the track. There's bolt on kits for every day driving that pull more than the 850 flywheel hp that's the max of the R35 tuning in GT5. I think it's more the case that they don't want someone with a 150k car beating the pants off the high end cars.

Link to comment
Share on other sites

All 6 of my Bob's are now at Level 40. Next stop is to get the X1 over 100,000km. Quite close now, that thing has been so very heavily beat on.

Still waitng for the long-tail F1 GTR to show up in the UCD :rant: I've seen the Silk Cut le mans Jag twice now :( I hope i'm not missing something here, like your A-spec level needing to be 30+ or sumsing (doubt it though)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...