Jump to content
SAU Community

Gt5 Is Ready


bigslick
 Share

Recommended Posts

Have you done like the wind ?> The final one ?

Basically, Buy a Corvette ZR1 or whatever the are from CHEV.

take it to GT AUTO

Perform racing modifications.

This should give you pretty much all the expensive shit in the tuning show (weight reduction etc etc)

Now go and fully tune the engine as far as it can go.

Buy racing softs.

You should now be able to win most races.

Win the "like the wind challenge"

You with the Toyota Minolta 88C-V, Give this car the biggest turbo upgrade and racing soft tyres.

You now have a car to beat any cup it is eligible for.

Link to comment
Share on other sites

does rebuilding the engine and chassis actually achieve anything ?

I don't want to do a full 6 hours of testing at the ring to determine this.

beaten all races bar the bottom 4 of the enduro's and the Formula GT world championship.

rebuilding an engine will see you get an increase of hp (takes it back to what it was stock), so if you have a car that you have used a lot and it is down on power compared to when you first bought it and an oil change still doesn't take it back to full original power then a rebuild will.

don't know about the chassis one though.

Link to comment
Share on other sites

Have you done like the wind ?> The final one ?

Basically, Buy a Corvette ZR1 or whatever the are from CHEV.

take it to GT AUTO

Perform racing modifications.

This should give you pretty much all the expensive shit in the tuning show (weight reduction etc etc)

Now go and fully tune the engine as far as it can go.

Buy racing softs.

You should now be able to win most races.

Win the "like the wind challenge"

You with the Toyota Minolta 88C-V, Give this car the biggest turbo upgrade and racing soft tyres.

You now have a car to beat any cup it is eligible for.

Well didnt work....will have to slug it out to 5mil credits the old fasioned way

Link to comment
Share on other sites

so you bought the newest corvette, modified it completly. then went into the GT auto and performed the racing modification?

failing that i can loan you a car that will do the job.

Link to comment
Share on other sites

Yeah Zebra,

What exact car did you buy.

If they are catching you make sure you play with gear ratio's depending on the track.

I found I could go a lot closer on Daytona Infield circuit and then of course open it right up for Indy.

It wasn't a struggle, it should be a pretty easy clean sweep for you.

Link to comment
Share on other sites

make sure you put full downforce on the car. this will allow you to go much faster round the corners. and then just slipstream the other cars down the straight and once you get to the front block like a sumbitch.

Link to comment
Share on other sites

the prob I have is getting past the cars through the infield, no where to pass/or you just get bumped off....it shits me that there is no quali...fkn over starting in 7th all the time

Rolling starts also shit me to tears

Link to comment
Share on other sites

Meh found out why I couldnt do it...Sports tyres not as good as soft slicks lol

Also f**k GT5 does a shit job with fast cars LMP/Nascar etc...its like it doesnt know what to do with them

Link to comment
Share on other sites

Hey Zebra whats your PSN name and I'll add you and lent you cans if needed. I've worked my way to 20 mill already and on the way around a second time!

Link to comment
Share on other sites

Im almost to 20mil thanks to remote bspec haha

hahaha, yeah thanks for that. i log in every week or so and retrieve the prize money i've gotten thanks to you and a few others. if i have time i run a few races to pay you back a bit too.

zebra i sent you a friend request on PSN ages ago. i could've earnt you a heap of money over the past few months had you accepted, LOL

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
    • You need the kit turbo taipan has shown you because that manifold ia designed have side feed injectors 
×
×
  • Create New...