Jump to content
SAU Community

Recommended Posts

that's only the basic version, not the collectors edition. and you have to buy a wheel to get it. so while i may be paying $60 more for the game, my total outlay is only $130, not $475

more info revealed at the tokyo game show yesterday.

Here’s a quick overview of what’s been discussed in the TGS 2010 GT5 breakout session:

* Laguna Seca has been completely rebuilt and will return for GT5. Trial Mountain has also been confirmed.

* “Gran Turismo Anywhere” will allow you to manage B-Spec races, right from your computer. You’ll be able to hold B-Spec races with your friends from anywhere in what are called “Remote Races”.

* GT5 will feature a series of special events such as the Karting Experience, the AMG driving school, The Stig Challenge, Jeff Gordon NASCAR School, Sebastien Loeb Rally Challenge, and Gran Turismo Rally.

* Point-to-point rally stages will be automatically and randomly generated – you’ll have to depend on your co-driver to give you the best instructions about the road ahead.

* Rally mode can be played either on or offline.

* Weather changes include temperature differences, air pressure changes, and humidity, affecting the surface conditions of the track dynamically.

* Weather conditions are randomized. Forecasts for your race will be available but may not be entirely accurate, just like the real world.

* Polyphony Digital has helped Red Bull Racing’s Adrian Newey design the X1 Concept – an “ultimate” racing car, free of any technical regulations.

* Polyphony Digital has worked to improve engine sounds.

* Yamauchi admits that, in certain situations – such as standing race starts in the rain with 15 other cars on the screen kicking up spray in front of you – the game may not be able to hold 60FPS. Otherwise, it will strive to hold 60FPS as often as possible.

* The Volkswagen Kubelwagen, which has a drive system like the first beetle, and the amphibious Volkswagen Schwimmwagen will be in the game.

* Many things didn’t make the cut in Gran Turismo 5, and work on Gran Turismo 6 has already begun.

they don't have the collectors edition on their site, and i'm guessing it wouldn't be that much cheaper than buying it from a local store once i add on the cost of postage (since postage is $15 and they are only $4 cheaper than shops here for the standard game). and then if there is anything wrong with the game i have to post it back, rather than just driving to where i bought it. and i would get it quicker through my local store.

i'd also hazard a guess that they are losing a few dollars on the game at that price. unless sony has changed the amount of mark up they put on games from back when i worked at a toy shop where a ps2 game that sold for $100 would wholesale at around $70 to $80 from memory.

recently I bought a mybook world edition "white light" as my PS3 was getting full too. This thing is great, you just plug it in to your router and the PS3 detects it straight away and all you do is move your movies into the right file on the my book and then you can view them through the PS3 using the movie options from the main menu! 1TB was only about $180 so it was pretty good value.

Or you can just download a program called PS3 Media Server and your PS3 can read everything off your PC.

Too bad you won't be getting it till Nov 4 :cool:

ahh, but my EB games guy, knows the sister of the brother who owns a budgy related to the budgy of the daughter of the aunt who knows mister GT5's step son's nephew on his mothers side.

And if he says its Nov 1, then goddam it, its Nov 1!!

I'm gonna check my reciept for a Pizza Hut clause. If its late its free :rofl2:

  • 2 weeks later...

Yeh it looks very pretty.

What about the important stuff though?

What are the physics like? Can you just rail ride around corners or will the cars actually have some semblance to real car handling traits?

Will the cars slow down when you lift off the throttle?

Will cars suffer actual damage if you hit anything? (i'm not talking about pretty crumpled panels either)

Will tyres actually blow if you don't bring it in for a tyre change or run into something?

Will tyres heat up / cool down depending on how you drive on them?

Is it possible to DNF a race?

Will there be more than 6 cars in a race?

Will the AI have any realistic behaviour or will they just hold their line and slam into you every time you make a legitimate pass?

I'm sure the game will be fun and all, but hardly a simulator by any stretch of the imagination.

Just pre-ordered the $300 edition...

I think I died a little bit on the inside..

same here, i get my license back on the same day of the release. though i wonder if its really worth it for 300? unless i win that merc ;)

Yeh it looks very pretty.

What about the important stuff though?

What are the physics like? Can you just rail ride around corners or will the cars actually have some semblance to real car handling traits?

Will the cars slow down when you lift off the throttle?

Will cars suffer actual damage if you hit anything? (i'm not talking about pretty crumpled panels either)

Will tyres actually blow if you don't bring it in for a tyre change or run into something?

Will tyres heat up / cool down depending on how you drive on them?

Is it possible to DNF a race?

Will there be more than 6 cars in a race?

Will the AI have any realistic behaviour or will they just hold their line and slam into you every time you make a legitimate pass?

I'm sure the game will be fun and all, but hardly a simulator by any stretch of the imagination.

first of all, have you played prologue yet? if not then you should as this will give you a bit of an idea as to what the general physics are like, but they have been improved a lot since then.

1: cars will handle reasonably realistically

2:yes you will have damage that will affect performance

3: don't think so

4: possibly

5: i doubt it

6: well considering that prologue has 16 cars in each race, i'd say, definately yes

7: supposed to be much better. they will try and go round you and over take you rather than just punching into you. i know from playing prologue that it is much harder to get faster cars to give you a punt to speed you up when you have a penalty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
×
×
  • Create New...