Jump to content
SAU Community

Recommended Posts

did all the seasonal 6 races today....last 2 were actually a little challenging (without going nuts on car mods) the new Corvette sounds like crap apparently

almost 9 mill in the bank and some more dam sexy cars. 220+ atm

I used a corvette I already had in the stable. Had to do every mod to it, including rebuild the engine before I had a chance of winning that race. Dam I hate that track!!! In hind sight, I would have been better off buying a new (faster) Vette and using that as a starting point. On the flip side, I already had the MX5 and just fitted racing tyres and a filter and ECU - won the race easily enough.

I used a corvette I already had in the stable. Had to do every mod to it, including rebuild the engine before I had a chance of winning that race. Dam I hate that track!!! In hind sight, I would have been better off buying a new (faster) Vette and using that as a starting point. On the flip side, I already had the MX5 and just fitted racing tyres and a filter and ECU - won the race easily enough.

did the same today at a friends. the 2000 model.did almost everything to it and still didnt catch him...only 5 seconds off when we gave up.

i highly recomend the newest angriest Vette, and do a few good angry mods. much easier to drive.

Liger- not that ive seen :(

has anyone come across a Mercedes-Benz CLK-GTR LM Race car at all?? be it in the used car section or from winning a race?

I have one I traded for it. I don't think you can win it but it shows up in the UCD, if your keen for one pm me your psn and I can give you one.

I used a corvette I already had in the stable. Had to do every mod to it, including rebuild the engine before I had a chance of winning that race. Dam I hate that track!!! In hind sight, I would have been better off buying a new (faster) Vette and using that as a starting point. On the flip side, I already had the MX5 and just fitted racing tyres and a filter and ECU - won the race easily enough.

i had one of the c6 or zr1 corvettes (the supercharged 7L one or whatever it is) with racing modifications done to it that i'd used in other races. i was in the lead by the end of the second or 3rd lap. ended up lapping half the field.

has anyone come across a Mercedes-Benz CLK-GTR LM Race car at all?? be it in the used car section or from winning a race?

and I'm still waiting for a long-tailled BMW F1 GTR to show in the UCD :(

i had one of the c6 or zr1 corvettes (the supercharged 7L one or whatever it is) with racing modifications done to it that i'd used in other races. i was in the lead by the end of the second or 3rd lap. ended up lapping half the field.

yup- the '09 ZR1 Corvette; it's the best car to win the American Championship with, after being RM'ed

saw this today......how do they intend on getting away with it....i say disqualify them all. what do they do if they make it to the finals and actually have to race the lap??

Americans

P.S. crap track anyways....designer should be shot

Edited by boiracer

I think its the expert series there's a race series for the older (pre 79) le mans type race cars. Can't remember what it's called right now. What cars have people used to finish these races? I've been trying with a Countach with every mod i can buy but the best it can do is 2nd with absolutely no chance of a 1st. :(

<br>I think its the expert series there's a race series for the older (pre 79) le mans type race cars. Can't remember what it's called right now. What cars have people used to finish these races? I've been trying with a Countach with every mod i can buy but the best it can do is 2nd with absolutely no chance of a 1st. <img src="http://www.skylinesaustralia.com/forums/public/style_emoticons/default/sad.gif" class="bbc_emoticon" alt=":("><br>
<br><br>I used the Toyota 7 and I think that it's a prize car B spec somewhere.  I have heard it ''can'' be won with the Countach but I tried it too and theres no way I could have won with it either. Edited by NISMATT

I'm selling my code on eBay, I haven't even played B Spec yet. The only reason I bought the Signature edition was that I thought that the SLS AMG competition was open to everyone who forked out for that pack, not just for 15 players across the world who have no life except for playing GT5 B Spec 24/7.

eBay link - GT5 Signature Edition SLS AMG Competition code auction

Starting bid is $20, Buy It Now for $150. Up for the next 3 days.

wha? I forgot to do my entry for the SLS AMG. I'm guessing that A: I'm now too late and B: there was some other task I had to complete apart from shelling out $$$ for the game which promised me an entry in a draw to win an SLS AMG? arseholes.

I think its the expert series there's a race series for the older (pre 79) le mans type race cars. Can't remember what it's called right now. What cars have people used to finish these races? I've been trying with a Countach with every mod i can buy but the best it can do is 2nd with absolutely no chance of a 1st. :(

Hehe I had a go the other day. I only have one car that qualifies, which actually has some hp, but it wasn't quite up to the task. While the '62 Buick special may hose other pre-80's sedans, it's no match for proper race cars of the era. Poor thing lost about 10 sec in the first half lap, and only got worse from there.

I filed that one away for the "when I have a spare 50 million credits to waste on cars I'm only going to drive once" category.

I think its the expert series there's a race series for the older (pre 79) le mans type race cars. Can't remember what it's called right now. What cars have people used to finish these races? I've been trying with a Countach with every mod i can buy but the best it can do is 2nd with absolutely no chance of a 1st. :(

Hey mate it is possible with the countach tuned properly, I did it. The trick is to make sure the 2J is behind you on the starting grid. Then when you get down the straight on deep forest you just block him from passing you. The second course is much easier than the first as well, was in front by around 7 seconds.

i just nutted thru B spec to get the Toyota 7. "like the wind" is where you win it. and the Minolta in the Aspec version.

both cars are priceless in the racing scheme of things. saves you spending alot on buying equivalents

i wont get the chance to do ahte seasonal races untill tomorrow night anyway, so it does not bother me too much, altho i would like another 787B.

i've asked a few people about this, but how many of us race online? i've been toying with the idea of creating SAU room on a friday night/weekend night. but if the numbers are low it might not be worth it.

Mmmm 787B. awesome car

im keen for online racing...but im on that irregularly i cant really dedicate any weekend night.....everyone i know is having their 30th this yr. every weekend is a party (not that im complaining)

and yes bring on more seasonals

OK now at about level 31/32 for a and b spec...was a real pain in b spec winning the extreme series historic racers challenge whatever that is. Toyota 7 ftw. Damn that 2J when it starts on the front row I thought I had no chance :)

I shoulda bought the Nissan R92C when I had the chance, but I'm happy with my R89C. seems easier to control than the Minolta.

does anyone have a gripe with the tuning? I mean an R34 vs2 n1 can only muster about 800hp fully tuned? and let's not forget that the figures given are at the flywheel not atw. They've munted the tuning on a lot of cars but I notice it on the skylines relative to old GT's. the old GT's could pull 1100hp or more sometimes out of a skyline, has anyone managed over 1000hp with any GTR?

yes and no, they do become somewhat undrivable anyways once fully done up. my 33 GTR has 580hp (not fully pimped) and unless i fiddle with the suspension, and make it 25/75 F/R drive its too understeery for my likings at all. just seems to get more with more power.

even the tommy ZZII suffers from this a little.

P.S. not a complain, just an observation. anything can be worked around i guess.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
×
×
  • Create New...