Jump to content
SAU Community

I Need Some Advice On Rb30/26 Setup Bad!

monty_r33

By monty_r33,
in Engines & Forced Induction

 Share

Recommended Posts

N1GTR Grand Master

N1GTR

Posted
Posted
Nah, It was more of a rhetorical statement rather than a factual comment. Wasn't saying you said otherwise but just making an observation that if he had the second tune done at Dyson, it would more than likely rule out bad tuning.

Oh fair enough.

Completely agree :)

monty_r33 Community Regular

monty_r33

Posted
  • Author
Posted
Maybe i missed it, did Dyson tune it the second time?

Dyson had done the tune befor i bought it and it was running great. But then i went and changed the top end then dyson retuned it for me and made 490 at 20psi. was running wicked under boost but too fuely at idel. Then i had a bit of a missfire. so i took it to the local guys. They said the tune was done the old school way and that they could get heaps more power. So they made me 430 at 24psi. YAY. And to fix the miss fire they sent the microtec of and said it was the problem. them said it was the harness so they replaced it. Then still missfired so they replaced my no1 coil for $40 that fixed the prob. Then they gave me a bill for near $2500 they wont give me a timming graph. Said they cant get that of a dyno tune. but ill scan the results from dyson and the results for the local boys T.A.S.

STATUS Grand Master

STATUS

Posted
Posted (edited)
Dyson had done the tune befor i bought it and it was running great. But then i went and changed the top end then dyson retuned it for me and made 490 at 20psi. was running wicked under boost but too fuely at idel. Then i had a bit of a missfire. so i took it to the local guys. They said the tune was done the old school way and that they could get heaps more power. So they made me 430 at 24psi. YAY. And to fix the miss fire they sent the microtec of and said it was the problem. them said it was the harness so they replaced it. Then still missfired so they replaced my no1 coil for $40 that fixed the prob. Then they gave me a bill for near $2500 they wont give me a timming graph. Said they cant get that of a dyno tune. but ill scan the results from dyson and the results for the local boys T.A.S.

^^^ there's the issue.... "the local guys" :P

Edited by URAS
Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted
Dyson had done the tune befor i bought it and it was running great. But then i went and changed the top end then dyson retuned it for me and made 490 at 20psi. was running wicked under boost but too fuely at idel. Then i had a bit of a missfire. so i took it to the local guys. They said the tune was done the old school way and that they could get heaps more power. So they made me 430 at 24psi. YAY. And to fix the miss fire they sent the microtec of and said it was the problem. them said it was the harness so they replaced it. Then still missfired so they replaced my no1 coil for $40 that fixed the prob. Then they gave me a bill for near $2500 they wont give me a timming graph. Said they cant get that of a dyno tune. but ill scan the results from dyson and the results for the local boys T.A.S.

So you are saying you had 490rwhp then took it to another tuner and they could only get 430? nothing mechanical has changed ?

Sydneykid Grand Master

Sydneykid

Posted
Posted
Link make the ECU which calls the shots on the fastest RB30 powered car in the world (may be the quickest RB in this part of the world not running meth too?).

So what? Cars that are even faster, much faster, don't have ECU's at all. So we should all change to that fuel injection system? Why not, based on your rating system, it's better than a Link?

Cheers

Gary

The Dan Grand Master

The Dan

Posted
Posted
So what? Cars that are even faster, much faster, don't have ECU's at all. So we should all change to that fuel injection system? Why not, based on your rating system, it's better than a Link?

Cheers

Gary

Mechanical injection is superior to Electronic injection in nearly all applications...so yeah, we should all change to it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      forum.r31skylineclub.com down or gone?

      By niZmO_Man 路 Posted

      We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • MBS206
      Pillar gauges

      By MBS206 路 Posted

      See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • niZmO_Man
      R33 rear seatbelts

      By niZmO_Man 路 Posted

      bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr 路 Posted

      Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 馃檪  I know what it looks like  
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy 路 Posted

      Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
脳
脳
  • Create New...