Emanage Ultimate Removing Afm

[ICE_BlooD]

hi

i have a little problem trying to remove the AFM, when i put the example map on the airflow output map and remove the AFM the car don't want start, like the injector is not opening.

i have to do something else?

i have:

Nissan Skyline RB25DET S2

Emanage Ultimate Plug and play Harness

Copy greddy Pressure Sensor

greddy Intake manifold

throttle 80mm

[STATUS]

just make sure the idle afm voltage is the same as the values (voltage) in the Afm output map.... ie if it is idling @ 1.15volts the output map should have 1.15 volts in the squares at idle.

[dori34]

Copy greddy Pressure Sensor

what do you mean by copy??

does it do the same job?

where can i get one from.

[ICE_BlooD]

what do you mean by copy??

does it do the same job?

where can i get one from.

hi

it's a not original greddy map sensor. but i don't know if it work because i have problem removing the AFM. you can buy on ebay

http://cgi.ebay.com/Boost-Map-Sensor-for-T...93%3A1|294%3A50

[ICE_BlooD]

just make sure the idle afm voltage is the same as the values (voltage) in the Afm output map.... ie if it is idling @ 1.15volts the output map should have 1.15 volts in the squares at idle.

Hi

thanks Uras, if i send you the emu file you can help me with this?