Jump to content
SAU Community

Recommended Posts

Hi all, i have a set of Rays engineering TE-37, i have just got them bead blasted because i was going to get them painted and put them on my r34, but i have sold my car now dont have need for them, so they are ready for a fresh coat of paint, there are tyres but not on them, they are 18" 2x 8.5 and 18" 2x9.5, suits a wide body, looks good on a GTR.

if you have any questions please dont hesitate to call me on 0412 347 091.

Can paint them any colour you like.

2x Bridgestone Potenza RE040

235/40/zr18. 80% tread

2x Bridgestone Potenze RE01

265/35/zr18. 40% tread

Malbourne

$2,500

post-1193-1245122593.jpg

post-1193-1245122601.jpg

post-1193-1245122610.jpg

post-1193-1245122620.jpg

post-1193-1245122773_thumb.jpg

Edited by trbs
Link to comment
https://www.sau.com.au/forums/topic/274939-rays-te37-18inch/
Share on other sites

  trbs said:
originally of a R34

i think its a 45 off set

Best you confirm the offset that is stamped on the inside of the front and rear wheels. you're only shooting yourself in the foot if they are not as +45 is a horrible offset for those wheels.

  trbs said:
Hi all, i have a set of Rays engineering TE-37, i have just got them bead blasted because i was going to get them painted and put them on my r34, but i have sold my car now dont have need for them, so they are ready for a fresh coat of paint, there are tyres but not on them, they are 18" 2x 8.5 and 18" 2x9.5, suits a wide body, looks good on a GTR.

if you have any questions please dont hesitate to call me on 0412 347 091.

Can paint them any colour you like.

2x Bridgestone Potenza RE040

235/40/zr18. 80% tread

2x Bridgestone Potenze RE01

265/35/zr18. 40% tread

The offset of the wheels are +37 on the 9.5, +33 on the 8.5.

so it suits all skyline including gtr, 200sx, 300zx, etc....

Malbourne

$2,500

Nice wheels man. I'm looking for a set currently... but the size and offset provided by u state that they are not suited for a GTR. As all wheel drive need to run the same wheel size all around.

What is the best price you can do? Considering it has weak offset...

Edited by Dush
  Dush said:
Nice wheels man. I'm looking for a set currently... but the size and offset provided by u state that they are not suited for a GTR. As all wheel drive need to run the same wheel size all around.

What is the best price you can do? Considering it has weak offset...

hi mate, the best i can do is 2250 cash this week, thats probably the best i can do, what are you offering?????

  drift monkys said:
damn thats some nice wheels... although the offsets are a tad high.. :s... ill be in melb next week so might contact u if theyre still available

yeah no worries. just give me a call and if you wanna try em on you can

  Jack- said:
I'm interested if they'll be round for a week or 2 til i get some cash

i dont know if they will be around, i cant help it if they sell this weekend, give me a call and we can work something out if your really intrested

  trbs said:
Hi all, i have a set of Rays engineering TE-37, i have just got them bead blasted because i was going to get them painted and put them on my r34, but i have sold my car now dont have need for them, so they are ready for a fresh coat of paint, there are tyres but not on them, they are 18" 2x 8.5 and 18" 2x9.5, suits a wide body, looks good on a GTR.

if you have any questions please dont hesitate to call me on 0412 347 091.

Can paint them any colour you like.

2x Bridgestone Potenza RE040

235/40/zr18. 80% tread

2x Bridgestone Potenze RE01

265/35/zr18. 40% tread

come on guys it has to go

Malbourne

$2,500

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Meh, At 60 years old, I have been doing dumb stuff for much longer than you mate, I am the true King And unfortunately I cannot be a maroon, as I am not brownish red As for not getting ITB's, the plenum intake will apparently show typical gains across the board and increase induction noise a bit, but, have all over less dort than ITB's Cost difference for the extra ITB dorts was significant though, the total parts for the plenum set up is "around" $2kAUD plus shipping, the ITB's were $4kAUD plus shipping, I was contemplating really hard about paying the extra $2k for all of the dorts, but weirdly, some form of common sense, from listening to the platform experts prevailed  As for the NA mod hate by some, I've had a few boosted cars, with all their inherent issues, I'm now looking at simplicity and legalities for a street car, maybe I'm just getting old, and I'm quite happy to spend some of the kids inheritance, 5kw at a time 馃ぃ And think of all the money I'll be saving on consumables that something with boost needs, like engines, gearboxes, diffs, clutches,  tilt trays... etc. etc. etc. 馃お
    • Haha.  I wouldn't say I am either but I've definitely been around it plenty.  I'm guessing you know the dial in is basically to make a handicap to level the playing field between racers.  The car with the slower dial in goes first and in theory if they run their dial in time and the faster car also does then they cross the finish time if they also have exactly the same reaction time - if you go faster than the dial in them you lose, but if you are too slow there's a good chance the other person will get to the finish line first. I'm normally supporting other cars but they were all pretty dialled and were egging me on to race as well, here's one of the cars I tune (Starlet) which ran within like 1 hundredth of its dial in through the competition: https://www.youtube.com/watch?v=inEBu-d9Gn4&t=69s
    • Where ever the fuel reg gets it reference is what I use to T into for map reference been a very long time so where it goes to plenum/runners I have no idea but never had issues. 
    • What ecu? Same shop every time? Same ambient temperature? If timing is correct then pull plugs and see if lean or rich. Dyno can also read different if they have changed ramp rate or not set tacho/speed properly  
    • I've never done dial in's just straight up, whatever that's called. I'm far from a drag (racing ) expert.
  • Create New...