Jump to content
SAU Community

Recommended Posts

Hi all, i have a set of Rays engineering TE-37, i have just got them bead blasted because i was going to get them painted and put them on my r34, but i have sold my car now dont have need for them, so they are ready for a fresh coat of paint, there are tyres but not on them, they are 18" 2x 8.5 and 18" 2x9.5, suits a wide body, looks good on a GTR.

if you have any questions please dont hesitate to call me on 0412 347 091.

Can paint them any colour you like.

2x Bridgestone Potenza RE040

235/40/zr18. 80% tread

2x Bridgestone Potenze RE01

265/35/zr18. 40% tread

Malbourne

$2,500

post-1193-1245122593.jpg

post-1193-1245122601.jpg

post-1193-1245122610.jpg

post-1193-1245122620.jpg

post-1193-1245122773_thumb.jpg

Edited by trbs
Link to comment
https://www.sau.com.au/forums/topic/274939-rays-te37-18inch/
Share on other sites

originally of a R34

i think its a 45 off set

Best you confirm the offset that is stamped on the inside of the front and rear wheels. you're only shooting yourself in the foot if they are not as +45 is a horrible offset for those wheels.

Hi all, i have a set of Rays engineering TE-37, i have just got them bead blasted because i was going to get them painted and put them on my r34, but i have sold my car now dont have need for them, so they are ready for a fresh coat of paint, there are tyres but not on them, they are 18" 2x 8.5 and 18" 2x9.5, suits a wide body, looks good on a GTR.

if you have any questions please dont hesitate to call me on 0412 347 091.

Can paint them any colour you like.

2x Bridgestone Potenza RE040

235/40/zr18. 80% tread

2x Bridgestone Potenze RE01

265/35/zr18. 40% tread

The offset of the wheels are +37 on the 9.5, +33 on the 8.5.

so it suits all skyline including gtr, 200sx, 300zx, etc....

Malbourne

$2,500

Nice wheels man. I'm looking for a set currently... but the size and offset provided by u state that they are not suited for a GTR. As all wheel drive need to run the same wheel size all around.

What is the best price you can do? Considering it has weak offset...

Edited by Dush
Nice wheels man. I'm looking for a set currently... but the size and offset provided by u state that they are not suited for a GTR. As all wheel drive need to run the same wheel size all around.

What is the best price you can do? Considering it has weak offset...

hi mate, the best i can do is 2250 cash this week, thats probably the best i can do, what are you offering?????

Hi all, i have a set of Rays engineering TE-37, i have just got them bead blasted because i was going to get them painted and put them on my r34, but i have sold my car now dont have need for them, so they are ready for a fresh coat of paint, there are tyres but not on them, they are 18" 2x 8.5 and 18" 2x9.5, suits a wide body, looks good on a GTR.

if you have any questions please dont hesitate to call me on 0412 347 091.

Can paint them any colour you like.

2x Bridgestone Potenza RE040

235/40/zr18. 80% tread

2x Bridgestone Potenze RE01

265/35/zr18. 40% tread

come on guys it has to go

Malbourne

$2,500

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
    • I actually have an aftermarket hanger, the detschwerks x1 hanger, but my dw420 has never really sat in it correctly, good to know I can just modify it a bit to suit. Yeah cheers man will definitely have a play with it and hope it solves my dramas.
    • Seriously though, it's the Shaft Autoservice high mount rear spoiler: https://az-style.shop/items/5ffaad5a72eb464137a6edb1
×
×
  • Create New...