Jump to content
SAU Community

Recommended Posts

lol @ crushing cars idea, who thinks of these things..

crushing cars will definately help stop hoons, and bring world peace of course

http://www.news.com.au/adelaidenow/story/0...5006301,00.html

This is one of the reasons why it may happen

High Performance cars aren't always the issue, quite a number of times on my way to work I see a lot of mindless people. Just this week, 2-3 times i have seen people overtake into on coming traffic in the wrong spots. Just the other day i saw some sort of work Ute excessively speeding, dangerous driving, almost crashing into cars, with more excessive speeding, and also overtaking with undue car. I would have to say all the cars i have seen doing dangerous driving are some Commodores, and little shit box cars such as Barina's, work Utes, 4wd's, etc etc....it just amazes me that these people get away with it, don't get any fines, and then there is us or other car enthusiasts that get picked on and automatically get labeled as a hoon, and have to suffer there consequences, the laws are F'd.

Edited by Aberax

Just today, I had a Holden Zafira (I think) almost slam into the back of me at 60-70 kmh because of following too close - possibly inattentive driving - I dont know. They hit up the shoulder to avoid collision! or so it seemed...

i think its gotten to the point that we're going to have to arrange for a counter campaign, get some statistics for the last 10 years about each fatality and the circumstances.

graph such variables as age of driver, gender, driving experience, make and model of car, time and weather conditions, etc etc etc

i think that'd probably be the only way one could dispel the 'hoon' stereotype. mind you, the dickheads that have caused trouble the last few months have done nothing to aid to the image of anyone who drives a skyline/supra/wrx/stag/batmobile.... the way the media portray it that we are all hell bent on running our precious cars into a wall or another motorist is a bit of a laugh. I was speaking to a cop at Holden Hill on Wed while I was reporting an internet fraud, and when he gave me a 'victims of crime' booklet i flipped to the part where it refers to the media and I said 'I really like your section on the media" and many a lol was had about the media

In any case, Its going to be a very very hard thing for any court to declare within the >current< laws. The real funny thing is that traditionally, if a man was to commit an offence, then the man was punished. If he used a weapon to commit the crime, the weapon was not punished, and nor was the mans immediate dependants. This law runs counter to commonsense as well as legal precedent. That doesn't mean they can't/won't change the law to make it legal (which I suppose most people would be nonplussed about their rights being eroded...) However its interesting to note that the bikie laws in both SA and NSW have ground to a halt upon appeal to the supreme court about the constitutional (read - federal interpretation) legality. If the supreme court has any sense it'll strike the laws down and the dumbass politicions in SA and NSW will actually have to do their job for a change, rather than blaming any set group without any basis upon our current law

-D

-D

Thats a great point, a cars a weapon, take it away the user will find another one.. In the end crusing cars will just be a waste of time, it wont actually cut down the amound of 'hoons' because they will just find other cars. I posted on there saying what if the dole is paying for your car loan.. Tax payers money down the drain if the car is crushed..

Just another political scare tactic imo. Fair enough to impound serial offenders cars, but crushing is taking it a little too far. Possibly just another attempt at trying to assimilate us with the U.S. again

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you already have the engine cross member to match and likely gearbox mount to. The SR20 has a head start on the RB in this case. They handle GREAT with an SR20, lots of fun.   One I did back in the day
    • have no doubt and wanted too trust me and may regret later not necessarily worried about weight (would be 8 kg ish total) it was more the $$ to do it properly is about $6 - $7K in hardwear need long 310mm stroke jacks etc - plus install and call me whatever im not doing it myself even if wanted too cant weld etc  - thats $10K installed vs fraction of that cost while Ive spent some money on this POS I actually really dont like doing so unless its got a large chance to make me go faster 😁 hey in still carting this things around on a 15 yr old rusted open trailer so I can spend on racing not buy a new trailer to look better the manual jacks Ive had done are heavy and take space but are transportable and usable anywhere - taking or organizing even compressed air let alone nitrogen which is more whats needed coming from Perth to Winton or Sydney or the like honestly just adds to my brain headaches/ hurts of organisation also ha 15 mins job will get down to 2 - 5 min job vs 1 min job for airjacks - all tradeoffs I spose
    • Purely out of curiosity, how do you know all this @dbm7? Do you work with automatic gearboxes professionally? This goes way way way beyond "I've had an automatic Skyline once and did some mucking around"
    • I'll just reiterate that it's best to do all the wiring diagnostics, before even thinking about buying replacement solenoids ~ that is, be absolutely sure the solenoid is bad.....ie; bad connector(s), rodents chewed through a wire, etc etc. If you don't so this, you can fork out all the money for solenoids, only to find something else is wrong (this'll make you cry if you pull the valvebody only to find a broken wire is at fault... ...some more glue on the solenoid packs -- this is the RE5R01A shift solenoid assembly.... ...these are all shift solenoids ~ ostensibly they're the same as the shift solenoids from the 4-speed auto.... ...this is the RE4R01A solenoid set... ...with these, you have 3 shift solenoids attached to the plate, and the separate solenoid is the EPC solenoid (line pressure control) -- with both designs, the TC lockup clutch solenoid (also PWM so they could slide the clutch shut), is located on the lower valvebody half.... ...(story time)...back in the 90's, it was a common fault that the EPC solenoid (or TC-lock solenoid) would fail, but Nissan only sold them as part of the assembly (think ~$350 at the time) ~ thing was, Isuzu also used these boxes in light commercials, and you could buy the PWM solenoid as a separate part, so it was possible to buy/use that solenoid (around $65), and make it fit (remove the circlip, fit to old plate and deal with wiring)...making it a more cost effective repair. I've not seen the RE5R01A shift solenoid assembly, but with the 4-speed RE4R01A it was possible to hack/fit a single shift solenoid onto an other working set, using a donor solenoid from another set with failed EPC....(by rights the whole set should be replaced), but it ends up being a question of how much life is left in the box itself ; sometimes it's a viable repair to fix one solenoid, just to get another 100k of road miles out of it before it needs first overhaul...other times the box is that old/worn, you're as well doing first overhaul and replacing the solenoids and starting fresh... What Nissan did here with the 5-speed, was relocate the EPC solenoid to the lower valvebody (next to the TC lockup solenoid), and stuck the direct-drive clutch solenoid (for the extra gear) where the EPC solenoid used to be on the 4-speed....I can only imagine they did this for serviceability ; the PWM solenoids are most likely to fail, and it's a doddle to drop the pan and change these out (as opposed to dropping the valvebody itself to get at a top mounted EPC)... ...also keep in mind, that some BMW 3/5 series & Mazda (and maybe some Ford/Mazda rebadges, not sure), also used the RE5R01A box under a different name/part number...not saying parts availability is any better, but sometimes it helps to know this when it comes to NOS floating about in the EU.... HTH  
    • FWIW, air jacks are actually pretty light and simple to add, they are just 4 hydraulic cylinders (often at the main cage A and C pillar points) and an externally accessible airline  - they make quick work a breeze
×
×
  • Create New...