Jump to content
SAU Community

Restoring Headlight Lens

Blue Arrow
 Share

Recommended Posts

Blue Arrow Enthusiast

Blue Arrow

Posted
Posted

In case anyone is interested, this is a good write up on restoring the headlight lens. I remember this being discussed some time ago but thought it might help other members with regards to the hazy lens that the V35 tend to have over time due to oxidation.

I myself have used PlastX in the past with considerable success. The article covers the use of grit pads and some photos.

http://www.canadiandriver.com/2009/06/18/p...tion-system.htm

Cheers.

Rob

Link to comment
https://www.sau.com.au/forums/topic/275428-restoring-headlight-lens/
Share on other sites
sethaiyaar Community Regular

sethaiyaar

Posted
Posted

I am not 100% sure on this, but if my memory serves correct all headlight have this UV coating which prevents the oxidation, once the UV coating goes the oxidation comes back, so the headlight polish acts as a sealant....so the question is, while the sealant will keep wearing off, isn there a way to restore to factory specs?...sm sort of 'UV' spray?

But yeh, i dont have a drill with RPM rating :P , and my lights are kinda hazy...prob go for the PlastX kit.

siu_loong_bao Rising Star

siu_loong_bao

Posted
Posted

Mine have gone yellow as well....And I have been told to use toothpaste, water and a rag...I will try it on my V35 when I get hold of it soon...but in the meantime, I'll do it on the Mrs Mazda 3....hehe, wish me luck....

siu_loong_bao Rising Star

siu_loong_bao

Posted
Posted (edited)

here's another product, and available in Australia!!!

http://www.glassylite.net.au/webspecial.ht...CFc0vpAod9kC1qQ

I've emailed the guy and asked for a money-back guarantee if I decide to buy it. Will wait for a response. If it works, I'll let you guys know.

Edited by siu_loong_bao
Eldubb Enthusiast

Eldubb

Posted
Posted

I'm very interested to hear the outcome as i have had a detailer come and buff mine out with an electric buffer with no success. Mine seem to have gone through to the inside so there's really no helping me i think. The only thing i can think of is to take it off and clean the inside but i really dont want to go through the process...

our12 Enthusiast

our12

Posted
Posted

Hi.

I presume you are discussing the outside of the covers if so dont waste your money buying overpriced products. Simply go to the supermarket buy a tin of Brasso take it home give it a good shake pour onto cloth start rubbing. You may be very surprised at the result. Sometimes the old products are the best.

Let us know the results if you try it.

sethaiyaar Community Regular

sethaiyaar

Posted
Posted

I was just thinking...in the process when the headlight is wet sanded the UV protection is removed and thus oxidation occurs, to prevent this you wax it to for a layer....but instead why not use a clear film, not just any cheap one a 3M one, i used their vinyl on a couple of cars and they stick very well and stretch very easily around curves using heat.

if i do go the wet sanding process i will try it out with some clear 3m film.

popeye Contributor

popeye

Posted
Posted

A mate of mine used the Glassy Lite product a couple of years ago on his Soarer and he tells me that it worked really well. I haven't needed to do anything with my light yet, but if I did, he has been recommending Glassy Lite to me.

He said that with my lights being as new as they are, I could probably get away with just using Step 2 and 3 in the instructions as Step 1 is quite abbraisive and is best used on lights that are very dull. This is to keep them good, a preventative. I have seen his lights now, about 2 years on, they still look pretty good, although he does do maintenance on them every now and then.

sethaiyaar Community Regular

sethaiyaar

Posted
Posted
if this glassylite guy doesn't respond to me email enquiry by the end of this week, I am going to buy myself an aftermarket headlight set from the US....

But then you hit the never ending issue of the lights being lopsided...like the majority of the beam pointing out and hitting on coming traffic...do a search, there has been a extensive discussion about them. Also the fact they are ridiculously expensive, better to try using an abrasive method (sandpaper, brasso etc) and put a thin high quality clear film to protect the lights...well, forever.

siu_loong_bao Rising Star

siu_loong_bao

Posted
Posted (edited)

Tai, so tell us how u went about doing it on your car with some pics...An Aussie version would be most appreciated (versus the canadiandriver.com link)... :D

And where did you buy the clear 3M film?

Edited by siu_loong_bao
sethaiyaar Community Regular

sethaiyaar

Posted
Posted
Tai, so tell us how u went about doing it on your car with some pics...An Aussie version would be most appreciated (versus the canadiandriver.com link)... :blink:

And where did you buy the clear 3M film?

lol i will be doing it soon, hopefully in the end of next month...and about the film, you can contact 3M and they will point you

to the closest dealer...but ill prob pay a visit to a friend who i bought the vinyl for my black roof overlay.

Will be sure to update.

mxfly Veteran

mxfly

Posted
Posted

I do part time detailing as my 2nd job and have done heaps of headlights on my mates car yard. I have only failed once on the headlights and that was due to the fact the headlights were oxidised on the inside so the only way to polish it was to crack open the lens.

If there's enough interest I can do everyones headlights on a weekend, but we need to find a suitable venue with a power outlet and enough space for parking cars.

Also i can advise what products to use to prevent oxidising again with several sealant products.

Normally I charge about 50 bucks but if there's enough interest, i'll do it for half price. If I cant fix it, wont cost anything.

siu_loong_bao Rising Star

siu_loong_bao

Posted
Posted

I suppose it's only a Sydney 'groupie' thing....poor us Melb blokes...LOL

Well, I am keen to hear about who has already cleaned up their V35 lights and what they used, etc...

I was just about to click the 'buy it now' button for a 3M headlight restoration kit from the USA last nite too...I guess i can wait and see for a cheaper alternative. the 3M Kit is not cheap!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...