Jump to content
SAU Community

Where To Place Map Sensor For New Vipec Install

GTR1993

By GTR1993,
in Engines & Forced Induction

 Share

Recommended Posts

GTR1993 Mentor

GTR1993

Posted
Posted (edited)

Hey, just swapping over to my vipec plugin next week. I have always heard about issues with individual throttle bodies and map sensors. Where is the best place to take the reference from for my map sensor?

I done a search and came up with more questions then answers.

I know power fc says to drill and tap in 3 and 4 runners after the TBs, some say to go off the balance tube. I have only worked with single TB cars with map sensors before.

Cheers

Edited by GTR1993
BoostedBarge Rising Star

BoostedBarge

Posted
Posted

My Vipec is just teed off the FPR vacuum line. No dramas here.

I've been considering moving it to the rear vacuum line where the stock boost gauge is used, just so that it looks tidier. It looks like that point would be at the same pressure. Anyone got any feedback?

GTR1993 Mentor

GTR1993

Posted
  • Author
Posted

Yea i was thinking the same, it "should" be fine as the FPR needs a fairly stable vacuume source anyway, and the balance tube on top if feeding the reg. Should be fine for the map sensor. I just wanted to check.

Also does the vipec plugin use the standard inlet temp sensor on the rb26 of you install your own?

Cheers

Swiper the Fox Grand Master

Swiper the Fox

Posted
Posted
Yea i was thinking the same, it "should" be fine as the FPR needs a fairly stable vacuume source anyway, and the balance tube on top if feeding the reg. Should be fine for the map sensor. I just wanted to check.

Also does the vipec plugin use the standard inlet temp sensor on the rb26 of you install your own?

Cheers

you can use either....you configure it in the software.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      newbie attempts the GTR life.

      By sunsetR33 · Posted

      Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • codygrimm27
      Attesa pump mount options / ideas? R32 gtr style.

      By codygrimm27 · Posted

      Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
    • GTR_JOEY
      EOI - Genuine R32 GTR N1 Rear pods and side skirts

      By GTR_JOEY · Posted

      Sounds perfect! Stay in touch
    • luke gtr
      EOI - Genuine R32 GTR N1 Rear pods and side skirts

      By luke gtr · Posted

      Not ready yet, but maybe later in the year?
×
×
  • Create New...