Jump to content
SAU Community

Recommended Posts

Hey Guys, have got a few things for sale, will keep adding to the list as i find more stuff

All this stuff to suit RB26DETT, all brand new

ARP Main Studs $225 inc Freight SOLD

ARP rod Bolts $75 inc freight SOLD

ACL Race Series Main bearings Std Size $110 inc Freight

ACL race series Conrod bearings Std Size $55 inc freight SOLD

R33 GTR Crank, brand new $900 plus Freight

All this stuff still in boxes

More stuff

RB26DETT Block with main girdle/cradle: Has been hot tank cleaned, bored out to 87mm, decked a fraction to tidy up the face of the block. has had the mains girdle/cradle fitted and checked the tunnels for out of round/out of spec(Needs welch plugs fitted). $900 plus freight

Venolia 87mm forged pistons to suit RB26DETT, Brand new in box, with Nissan Genuine rings ready for fitting. All ciclips/gudgen pins etc there as well. $1000 inc freight

WILL SELL THE BLOCK, CRANK AND PISTONS AS A PACKAGE FOR $2500 PLUS FREIGHT IF ANY1 IS INTERESTED

STD AFMx3 $20 each SOLD

R32 GTR Crank Angle Sensor $50 1 SOLD, still have 1 more

6x Coil packs $70

ABS Module $120

R32 GTR Steering Rack with tie rod ends $150 SOLD

R32 GTR Clutch slave Cylinder $40

Clutch Master Cylinder $50

Brake Booster and Slave cylinder $150

A/C condensor $50

STD R32 GTR BOV $130

A/C Fan(Fan that sits in front of condensor that also switches on when engine gets too hot) $50

R32 GTR Bonnet Catch $80

Front wheel speed sensors $50 each

Rear Seat(No rips, bit dirty and faded though) $30

Passenger Seat(No Rips) $150

LH Door(White and complete) $250

Bare steering column $20

Glovebox Lid $10

Tailights(White Surrounds) $60 each or $100 pair

STD Fuel Pump $100

Drivers Side Headlight $100

Front propellor shaft $50 SOLD

Starter Motor $50

Another 6 coil packs $70

Coil pack resistor $40 SOLD

Rear window $50

Quarter windows $60 each or $100 pair sold pending payment

Front Crossmember $100

Tailshaft $80 sold

ALL PRICES ARE EXCLUDING FREIGHT

Michael for questions 0438911374

Thanks

More stuff:

ATS Twin plate clutch, half worn, good clutch, HANDLED MY 320kw@WHEELS GTR VERY WELL, EVEN AT 7800RPM LAUNCHES $500

Pair of Garrett 2560-5 turbos, good condition, less than 10000kms old, 1 turbo perfect, other 1 has tiny little bit of shaft play, is rated in HPI magazines top 20 turbos list. Direct bolt on replacement of factory turbos. Come with wastegate actuaters, NO DUMPS though $1200

HKS chipped ECU $50

Veilside Chipped ECU $50

Air filters with the Metal brackets that bolt directly onto AFM $50 pair

STD Turbo dump pipes(pipes that bolt directly onto turbos) $50 pair

Pair of cam/rocker covers(come with the screws that hold it down) $80

Thanks guys, also: still wrecking white R32 GTR, heap of bits sold but still some bits etc on there

i know you dont have one posted up but you wouldn't happen to have a gtr boot and spoiler in white would you?

Also what condition are the coilpacks in??

Thankyou

Aren't the Crankshafts superceded to the R34 crank for some time now? Where'd you find a new R33 crank?

Sorry mate, It must be a R34 crank, when i ordered it from nissan brand new they said that the R32 crank was no longer made, the part number for 32 and 33 were the same, i dont think he checked if the 34 part number was the same as well but knowing nissan it must be the same. Thanks for the knowledge

i know you dont have one posted up but you wouldn't happen to have a gtr boot and spoiler in white would you?

Also what condition are the coilpacks in??

Thankyou

Sorry mate, sold the boot and rear spoiler a few weeks ago.

As far as i know mate, all the coil packs are fine, pulled 1 set out of my 110000km gtr and replaced with the super spark, nothing wrong with the coil packs, just wanted an upgrade and to spend money.

The other set came in a 32 gtr i bought that had been crashed, car started and drove fine, was only running standard boost though

Cheers,

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
    • STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...