Jump to content
SAU Community

R32 Gtr Parts And Gtst Parts

ronu
 Share

Recommended Posts

ronu Enthusiast

ronu

Posted
Posted

Hey guys just did a 26det conversion in my r32 gtst :) .So ive got parts left over from the half cut that i dont need.

R32 gtr dash -$150

R32 clutch master cylinder with booster -$100

R32 brake booster - $50

R32 gtst accl cable and pedal -$60

R32 pwr steering pump -$50

R32 gtr k frame -$100

R32 gtr rear cradle -$100

R32 gtst drive shafts -$80 each or $140 for both

R32 gtst diff in good nik -$150

R32 gtst tail shaft -$80

R32 gtst rear hubs -$100 each or $160 for both

R32 speedo cable -$30

Rb20 or 25 top mount exhaust manifold -$150

R32 gtst aftermarket dump pipe -$80

Rb20 motor only with intake manifold -$350

R32 side mirrors -$60pair

R32 gtst std computer -$150

R32 gtr mines tune computer -$350

and any thing more that ur after just ask and i may have it

also guys im not often on the forum(to busy working on my monsta) so its easy just to call me on 0406942756 any time day or night,im also located in melb north(millpark)

thanks guys

Link to comment
Share on other sites
  • 3 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 1 month later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      Lets play a game - What is causing my oil consumption?

      By TurboTapin · Posted

      Thanks. I agree, looking at those plugs in conjunction with good compression/leak down tests I'm not too certain its ring related anymore.  I have a Swagelok ball valve on the drain and tubed it lower down to the left side of car to easily dump it into a container. I do not drain back into the sump. I've never had to drain it though as there's never been any oil in it. 
    • robbo_rb180
      Best chassis for motorsport use

      By robbo_rb180 · Posted

      Best bang for buck at the moment would be a 86/brz. Good chassis,  plenty of aftermarket support and parts everywhere.   I just picked one up with some quality gear and it drives better than my old 180sx.    Also depending on what your doing and budget.  An a90 supra is my pick if want to spend more. Great chassis, solid motor, gearbox is good. Development potential is crazy. They are doing well in prod sport and time attack. All the old jdm stuff needs alot of work as most of it all bent and over priced.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      It's basically the same platform, hence why everything bolts to everything else Kelford camshafts were recommended by Mania after they asked me what I want the car for, I said "I'll thrash it around daily and maybe take it to the track for fun" 🤣 Factory NC 2.0L cam specs: - Adv. Dur. 256 /256 - Dur @ .050 205 /190 - Lift 9.42mm/8.13mm So, as I know nothing about cam specs, all I can say is the numbers are different and it should get a little bit of lope....🤣
    • Dose Pipe Sutututu
      Best chassis for motorsport use

      By Dose Pipe Sutututu · Posted

      Depends on how extreme, however if you look at SMSP, they're all dominated by Hondas and M cars on amateur/street car events. 
    • MBS206
      Is this pressure plate warped? And do I need a new one?

      By MBS206 · Posted

      Without better pictures, it won't be possible for anyone to work it out further than we have.   Start measuring, EVERYTHING. Thickness of flywheel, and all around it. You want to know is if everything parallel. If from the face of the pressure plate (that bolts to the flywheel) if it is parallel to the pressure plate face, then something is NOT parallel or equal elsewhere. Or you've bent the shit out of the fingers in the pressure plate.
×
×
  • Create New...