Jump to content
SAU Community

R32 Gtr Parts And Gtst Parts


Recommended Posts

Hey guys just did a 26det conversion in my r32 gtst :) .So ive got parts left over from the half cut that i dont need.

R32 gtr dash -$150

R32 clutch master cylinder with booster -$100

R32 brake booster - $50

R32 gtst accl cable and pedal -$60

R32 pwr steering pump -$50

R32 gtr k frame -$100

R32 gtr rear cradle -$100

R32 gtst drive shafts -$80 each or $140 for both

R32 gtst diff in good nik -$150

R32 gtst tail shaft -$80

R32 gtst rear hubs -$100 each or $160 for both

R32 speedo cable -$30

Rb20 or 25 top mount exhaust manifold -$150

R32 gtst aftermarket dump pipe -$80

Rb20 motor only with intake manifold -$350

R32 side mirrors -$60pair

R32 gtst std computer -$150

R32 gtr mines tune computer -$350

and any thing more that ur after just ask and i may have it

also guys im not often on the forum(to busy working on my monsta) so its easy just to call me on 0406942756 any time day or night,im also located in melb north(millpark)

thanks guys

Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 1 month later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey all. Looking for all of the carpeted trunk trim for my 95 GTST coupe. I’m having a hard time finding the pieces I need on US or Japanese sites/auctions and was hoping someone has a clean set stashed away somewhere?
    • New aerial is aerialing well....trips into Goulburn are not losing the ABC classic radio signal Also......I've been procrastinating about wheels for the MX5, the car doesn't need any more tyre, I just "want" different wheels, so I went looking for something that legally fits the new Pilot Sports +1 size 215/45 17 that I'm currently running on the 17x7 OEM wheels (stock size is 205/45 17), not a silver, and not a black, ended up with gloss bronze Konig Dekagrams in 17x8 +40 which fit without the need for rolling the guards, whilst larger than the OEM wheels they are also lighter than the OEM wheels, and at just under $1300 for the set I'm more than happy with the price I seen a set of matt black Deka's on a MX5 when I was at MX5 Mania, same wheel size, same tyre size, sat really nice, and not stretched enough to look aids, although the 215/45 17 is the smallest that you can legally fit Just need to find some good black wheel nuts to suit
    • So I decided that I wasn't happy with how I originally wrapped the loom with fleece tape. I didn't factor in the new intake manifold/plenum so it always sat a bit funny. Yep, I decided to unwrap it and redo how the wires would branch out. Added in a light twist too, here's hoping I didn't snap any 30 year old wiring because FML if I did. Took a few more photos of the shit box too, needed it for Enthusiast Insurance as they wanted photos to justify why my agreed value was above market by a fair amount.
    • if wanting reliability and that level of performance a dry sump is mandatory for circuit stuff as you'll just be filling the head with oil. easy and reliable setup with potential for more later Hypergear bolt on turbo or a g30-660 with T3 rear housing .92 external gate mod to factory exhaust manifold with 45mm waste gate plazmaman/pwr intercooler oil cooler 1200cc injectors 460 TI/walbro with upgrade relay and wiring/pwm control turbosmart fuel reg Link g4x plug in ecu with knock, oil, fuel pressure sensors, 3 port mac valve, DBW conversion Quality clutch kit- NPC is what I've used for a long time READ THE WHOLE OIL CONTROL THREAD Could do major service while there and maybe headgasket, studs and valve springs. as soon as you whack a massive turbo and short runner intake on a street car they are useless and not practical the above will be a fun and reliable 400-430hp on E85 all day with correct maintenance and mechanical sympathy.  
×
×
  • Create New...