Jump to content
SAU Community

Recommended Posts

Item: R33 stuff.

radiator support panel ,cut behind strut towers $250ono

cross member (k frame) $150ono

steering rack complete from ti rod to ti rod $180ono

steering rack minus passanger side rack end and ti rod end $100ono

series 1 head lights a pair $300

series 1 rh front bumper blinker $30

dash pads x2 , 1 coverd in genuine white swade $250ono,1 stadard $120ono

series 1 steering wheel $40ono

series 1 front seats $100 a pair

rear seat x2 $50 each

set of 5 aus approved seat belts $150

set of 4 door cards $200 i also have other single door cards $60 each ono

set of 4 inner door/roof molds $100set

hood lining x2 $40ono each

carpot in mint conditon $80ono

kyb suspention $350ono

rear cradle $150ono

rear upper and lower control arms lh side $100ono rh side $100ono

rear hubs complete with brake calipors, lines, hubs, rotors $220ono

front sway bar standard $50ono

rear sway bar standard $50ono

front hubs and rotors $150ono

tail lights and covers x2 and i have 3 colours 2 chose from ,white,marone,red $150 a pair has bolb loom with them as well

x4 power window motors x2 lh and x2 rh $60 each

rear bumper covers and suport bars x2 $100 ono each

series 2 boot wings x2 $120 each in white and 1 in marone

boot lid with shaved boot lock lil ding $80 ono

space saver wheel like new tyre $100ono

set of glass minus front window has tint $250 for the set i paid more just for rear window at a inport wreakers

lots more stuff i will add when i rember or just ask if there is sum think you need i might have it cheers

Location: tweed valley i can deliver to sum places as i work all over the gold coast

Website: here

Item Condition: great

Reason for Selling: not needed

Price and Payment Conditions: as above but make offers

Extra Info: just ask if needed

Pictures: can get but only on dial up atm

Contact Details: here

Link to comment
https://www.sau.com.au/forums/topic/275656-lots-of-r33-parts/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

sorry to pll that have pmed me i cant return a pm till my topic cound reachs 10

i do have the a/c pipe skibbo

to thoose who pmed me i pnly have rh side fron lower control arm x2 no lh 1z sorry

the marone boot wing i looked at today has sum clear pealing but yeh i can post at your cost cheers

yeh ill post power window motor for $65 if your keen punisher6942

i should have those triageler plastic bits aidan make offer

isoru yeh still got sway bars ,sorry silbastian dont no if they fit r32

sorry still cant pm ppl so if you want these parts pm me your number and part you want and ill give you a call cheers

sweet as dude ill take one of the drivers side power window motors off ya hands for sure. Text me your bank details and ill transfer the funds when i get your details. My number is 0423819988 and the name is daniel. Ill look forward to hearing from you mate

n/a beast (james) give me your numba and ill give you a call cheers

punisher ill give you a call tomos cheers

sorry ppl i still can pm due to post count no being 10 or sum crap

Edited by DRB25

hey DRB25 still waiting on that phone call or text message with ur banking details champ..... and just want to clarify that the power window motor is in 100% working order???

Hey mate,

Can you give me an address to come and see the car? jus wanna have a look at headlights and some other bits and pieces. The headlights will fit my R33 GTS series 1 aye?

My mobile number is 0402859795.

Cheers mate.

I live in Southport

sorry to pll that have pmed me i cant return a pm till my topic cound reachs 10

i do have the a/c pipe skibbo

to thoose who pmed me i pnly have rh side fron lower control arm x2 no lh 1z sorry

the marone boot wing i looked at today has sum clear pealing but yeh i can post at your cost cheers

hey mate its skibbo here my number is 0415554917 for the big ac hose from fire wall to compressor how much to send to sydney all up cheers mate sydney 2753

Edited by skibbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What could be causing my clutch problem besides a bad master or slave then? Both those parts are new 
    • Just came across this, but in QLD I start leave again in 2 weeks, if it is still available I might drive up and check it out Unless, @MBS206 do you live near here????, if so I could hit you up with a finders fee https://www.gumtree.com.au/s-ad/hope-island/auto-body-parts/nc-mx5-factory-hard-top/1328976391
    • My hold point for future mods is that I want a OEM detachable hard top first, but, finding one is a pain, MX5 Mania are looking for one for me, but, as hens teeth are more common, finding one in Australia is proving problematic  I can get a OEM one from overseas, hell, you can still get new ones in 'Merica, but, shipping is a absolute killer and I cannot justify the cost, or the risk of it being damaged during transport As for the aftermarket hardtops, whilst they do the job of being a hard top, and are fine for a track car, they don't seal well (read: leak like a sieve in the rain), and you need a plastic/poly rear window, plus they are a bolt in option only and not made to be easily removed I liked how the hard top on my NB could be fitted, and removed, by myself, in less than 5 minutes I know it sounds bad, but I'm waiting for someone to write off a car with one so I can swoop in on their pain, it will go to a good home though, so my guilt of this is tempered
    • I’ve got one on mine and it’s fine, 
    • No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
×
×
  • Create New...