Jump to content
SAU Community

Recommended Posts

What up muh peeps!!

I picked up a series 1 last night

Before i commence the RiaZ transformation i need a bit of help

i searched last night with no luck

the front bar indicators/park lights/driving lights (not sure which)

is spinning me out

I have seen 2 types

one has a larger orange indicator section and a small clear one

and the other is the one i have with a smaller orange indicator section and larger clear one.

Is this an indicator/park light or indicator/driving light

is there supposed to be a switch?

how does it all work?

is it just so it looks pretty?

anyone who can locate a thread please put up a link if it helps answer these questions

second thing is has anyone got any spare mounts for installing a stereo? (the factory brackets used to connect to hold the deck in the console are missing)

or if anyone has some lying around that I can look at to make my own brackets that would be fantastic

oh yeah 1 more thing

clutches

do 93 r33 clutches wear so the engaging is at the floor or higher up

thanks

i am sure there are plenty of series 1 owners who know all these answers

RiaZ

i was also wondering about the front indicators... (r33 s1 aswell)

but i figured it out...all by myself... :D

haha

anyway this is what i know:

Park lights are on the outside of the headlights.

Frontbar indicators are yellow with a clear bit next to them as as far as i can tell the clear bit does **** all and is just show..

i dont have fog lights or anything in them although chuckin some lights in there for some foggy's could be the go

my 2 cents hopefully it helps...

well from what i'v seen on "most" lines is that those light in the indactors do a whole lot of nothing series 2 and series 1

but in some cases they do have a switch if you look where u turn your lights on (indactor arm) there should be the normal switch for turning lights on in some cases there is another similar switch right behind this one for turning these lights on i'll take a digi pic later and post it

i know about the stalk cos i had a series II before and those do a whole lotta something which is fine.

back to the front bar indicators very annoying... and there definately is 2 different types with like I said a larger and smaller clear section next to the indicator.

maybe its just spares that have been thrown in from another r33 that did have lights

in that case i see some missle switch action. test wires for what wattage bulbs they will support and bobs gonna be my uncle

umm paul tis true the fun has begun already

i will holla at ya for sure

anyways next and most importantly is the stereo bracket.

need tunes arrrghhhh

its been less than 24 hours since music in the car...the world is gonna end.

anyways next week i should be at kwinana seeing what abuse this car will take considering the clutch is not standard.

oh yeah someone answer the clutch question

hey riaz

heres some threads that might help u out

http://www.skylinesaustralia.com/forums/sh...ighlight=lights

and in the bottom of that thread theres another link.

what colour is your car dude? what engine mods? :D

good2c u got another 'line.

Originally posted by NO_RSPECT

back to the front bar indicators very annoying... and there definately is 2 different types with like I said a larger and smaller clear section next to the indicator.  

maybe its just spares that have been thrown in from another r33 that did have lights

Yeah, you're probably right. The bumper may have been replaced with a 2nd hand one that came with driving lights (what you have).

in that case i see some missle switch action. test wires for what wattage bulbs they will support and bobs gonna be my uncle

Don't forget the relays. Should work ok.

anyways next and most importantly is the stereo bracket.  

need tunes arrrghhhh

its been less than 24 hours since music in the car...the world is gonna end.  

Don't have the bracket but you can have my factory double din stereo if you want. Use it to make a bracket or just jam it in there.

oh yeah someone answer the clutch question

Need more info, do you think the friction point is too high or too low right now? Come around and I'll have a test drive :(.

thanks for the offer gradenko

i might be round in a fortnight i think once the kit is on

if WORKS AUTO do me a good price

also the thread BOO5T is exactly the thread i read a while back and was looking for, so glad you found it, i was getting hell annoyed

I am going to rip the bar off etc and see what goes where and what i can do to those lights. like up the relays and stick some brighter lights in, as long as the plastic can handle it

umm the stereo brackets are $11.50 from nissan (EACH)

so I might just fork and buy some cos its too much stuffing around, then i will need one of those dual diversity antenna adaptors as well.

also anyone selling any 6x9's cheap, lemme know otherwise i will have to tap into my resources.

i can't believe series 1's are like so different in the small little things

1 more thing, is anyone selling a series II wing here in Perth

oh rofl rofl

pantene paul

man that is seriously gonna stick

Umm if i dont have the factory solenoid for the boost control and there is the line going from the wastegate to the air intake.....what does this mean for boost.

fark i hate modded cars

i havent learnt all this stuff yet and now its all done to the car

anyone....boost guage for sale at all?

2" size

Hi Guys,

JB HiFi just opened up in Cannington today. They do all car and home audio in addition to CD's.

If any of you wanna come down and have a chat or get speakers/amps/subs etc for your lines tell me your from Skylines Australia and ill give you all trade prices....

Cheers

Adam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
×
×
  • Create New...