Jump to content
SAU Community

Recommended Posts

  • Replies 714
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

What servo in Gawler where you looking at stopping at? There is a Caltex/Woolworths, Mobil, Shell, and 2 BPs. Unfortunately, both of the BPs have little to no parking. So it may be better to fill up at either On The Run @ Munno Para, or BP which is 300m further down the road from OTR MP.

Probably the one near the bridge in the middle of gawler (I'll be leading the crew in via the angle vale bypass and then out to tanunda/nuri... it'll be a very quick stop, simply to get petrol - will need to be either a BP or Mobil as nobody else stocks 98 octane

-D

Probably the one near the bridge in the middle of gawler (I'll be leading the crew in via the angle vale bypass and then out to tanunda/nuri... it'll be a very quick stop, simply to get petrol - will need to be either a BP or Mobil as nobody else stocks 98 octane

-D

The one right near the bridge (across the road from Holden) is a Shell - which infact is where I normally get fuel but its 95octane VPower. BP is about 1/3 of the way down on the main part of the main street on the left hand side.

http://maps.google.com.au/maps?source=s_q&...013304&z=16

The one right near the bridge (across the road from Holden) is a Shell - which infact is where I normally get fuel but its 95octane VPower. BP is about 1/3 of the way down on the main part of the main street on the left hand side.

http://maps.google.com.au/maps?source=s_q&...013304&z=16

BP it is then, point B on your map. looks good.

-D

Ben or anyone else, do you have a direct contact for the organizer of the event so I can get in contact with them........I think it's Stuart that's organizing the event, yeah?

Also can payment be made over the phone by credit card or EFT by any chance?

Sled and i are leaving at 2pm on the Friday and going though Murray Bridge if anyone is intrested in going that time please let us know . S

So are we all meeting up somewhere before and heading down together or whats the case on this???

I will have a set of ISC N1 Coilovers and Rear Camber Arms in the next few days, so my car will lose its 4WD spec suspension just in time for the show! It will also allow me to put my Rays Gramlights on. Stoked!

hmm, hopefully you can adjust those arms when theyre on the car. heard reports from a few people that they had to take the arms off everytime they wanted to adjust them.

I think so, REALLY hoping to get my ISC coilovers and camber arms in this weekend, that way I can lose the stock rims to make way for my Gramlights.

I actually got a letter from the Riverland Motorsport Club today with a brief schedule and also my car number (25).

A week to go people hope you are all ready ? :(

Nope..dont even have the car...hopefully have it tuesday.

I actually got a letter from the Riverland Motorsport Club today with a brief schedule and also my car number (25).

Same, i got mine today, entrant #13...not sure if that's a bad sign :S

Nope..dont even have the car...hopefully have it tuesday.

Same, i got mine today, entrant #13...not sure if that's a bad sign :S

rofl, yeah i got mine too, #52

just got back from the mechanic. some touchup paint yet to go, but the front spoiler lip and weezy's teins are now fitted

withspoiler1.jpg

withspoiler2.jpg

NOW the car is a a decent ride height. Contrary to what some (who havent seen my car) have said, it was way low before, only an inch clearance between the ground and the spoiler lip. Now I got 2.5 inches, which should be enough. The teins are pretty stiff compared to the bilsteins, but nowhere near as much as some people made it out to be. I'll know after loxton whether or not I'm gonna buy them (a good 3 hour drive there and back will decide it heh). Brakes also got bled for a 2nd time (as the seals in the caliper took a couple days to set) and now the brakes as firm as megan fox's arse...

Oh and my boot release latch is working again. Porn you can't see.

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome!  Car sounds great, anypics ?
    • Welcome.  800hp should be a bit of weekend fun!
    • I'm going with "Just run two gates". Fix the problem conclusively. It's the only way you'd ever truly know, right?. This is all pretty much splitting hairs. Even the extreme example where it takes two whole seconds at 100kmh or something sounds monstrously dubious. And anyway, when you're punching the throttle when you 'need' this power, you aren't at 2800rpm in the wrong gear. Test it at 5600rpm in 3rd gear, when you're traction limited punching out of a sweeper. Much difference there when you account for traction?
    • And the full R32 GTR wiring diagrams are also freely available. Hmm.... there's supposed to be an auto replace that would have linked the thread. Here it is, manually  
    • Ahh...should have been clearer ~ there's 2 ... SMJ = super multi junction (connector)...   ...this is connector 6 & 25 in above image -- body harness to engine loom (6) & body harness to main loom (25) Headlights go to front via connector 6 ; fuel gauge goes to tank sender via connector 25  ...like I say this is R33 diagrams, but at a pinch R34 won't be too far different. *IF* the two ground faults are related, this can be the only place where both wires converge (as one runs to the back, the other to the front)... ....thing is, you probably need to establish if the faults are related (unless you examine that area and find obvious chaffing on the looms there to body ground)....*IF* the fuel gauge is still broken (full needle deflection), I'd be headed for the boot, remove fuel sender wire, key on and measure the voltage there ~ it should be roughly 10volts. If that's ok, check sender to ground resistance...if this is a dead short to ground (and there's fuel in it), then sender has failed or something funky has happened to wiring in the tank. edit: ahh...rereading the thread, this is R32....above fuel sender test still valid tho'
×
×
  • Create New...