Jump to content
SAU Community

"stu Tu Tu"


Recommended Posts

What the hell is that noise? I've heard it twice now, both times from VLs. Is it some tricked out BoV?

If you ask me I think it sound ridiculous. My girlfriend was in hysterics for about 10min as we drove beside this thing.

Thanks.

Link to comment
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

It's called 'dosing' in the VL world, also know as 'flutters', but around here it's best described as 'compressor surge'.

It's the sound of the air bouncing off the turbine blades when the butterfly to the intake plenum is closed. Normally all this pressurised air get's released by the Blow Off Valve, but if you don't have one, it does that.

Different length, shape and designs of pipes make different noises...

Link to comment
Share on other sites

It's either a HKS Super Sequential BOV or some cheap ass BOV or like what others have said compressor surge.

HKS Super Sequential BOV = Wank (Only useful on highly tuned cars that are running a lot of boost and the stock one cannot handle it any more)

Compressor Surge = Say goodbye to your turbo.

Link to comment
Share on other sites

It's either a HKS Super Sequential BOV or some cheap ass BOV or like what others have said compressor surge.

HKS Super Sequential BOV = Wank (Only useful on highly tuned cars that are running a lot of boost and the stock one cannot handle it any more)

Compressor Surge = Say goodbye to your turbo.

Is that the HKS SSQV BoV? I've been trying to convince a mate to buy one for his evo, but all the vids I've seen of it its a sharp, high pitched noise rather than the VL flutter.

Just curious, is "dosing" unique only to the VL, or is there a specific reason VL owners choose it?

Link to comment
Share on other sites

Is that the HKS SSQV BoV? I've been trying to convince a mate to buy one for his evo, but all the vids I've seen of it its a sharp, high pitched noise rather than the VL flutter.

Just curious, is "dosing" unique only to the VL, or is there a specific reason VL owners choose it?

Yeah either it's the HKS BOV or like others have said with the metal pipe.

Any turbo car can make the noise, it just depends on the BOV set up or whatever the owner does to it.

The stock BOV should not make any noise, at least no "Stu Tu Tu".

But if you put on an air pod, while still having your stock BOV, you will get a nice "Suction" noise then a "Choo" at the end (Only when on boost).

Link to comment
Share on other sites

What the hell is that noise? I've heard it twice now, both times from VLs. Is it some tricked out BoV?

If you ask me I think it sound ridiculous. My girlfriend was in hysterics for about 10min as we drove beside this thing.

Thanks.

LOL! just search "VL turbo dose" on youtube,,theres thousands of videos on that stuff,,apparently they're a favourite with wog guys and their significant others

Link to comment
Share on other sites

my ceffy doses like an athlete on the roids, but it comes from factory with no recirculation valve, and still runs stock boost on a stock turbo. all you have to do is take out the intake resonator and bolt in a pod and I get instant flutters.

GAGF if that's bad for the turbo, it came from factory like it and has run for 180,000 kms with no damage to the turbo or engine.

Link to comment
Share on other sites

yeah, sounds heaps cool- love it when some deadshit drives along in 2nd gear in traffic, gassing it then backing off just so everyone can hear his 'hectik fludderz'

sik moit :P

Link to comment
Share on other sites

Yeah either it's the HKS BOV or like others have said with the metal pipe.

Any turbo car can make the noise, it just depends on the BOV set up or whatever the owner does to it.

The stock BOV should not make any noise, at least no "Stu Tu Tu".

But if you put on an air pod, while still having your stock BOV, you will get a nice "Suction" noise then a "Choo" at the end (Only when on boost).

that is incorrect.

the only relation a BOV has to flutter/dosing is whther its blocked or not. the type of flutter/dose depends on the width, length and material of the induction pipe. the turbocharger does play a roll aswell.

all a bov does is hold the air trapped in the piping. so it bounces around and goes back through the turbo, for the turbo wheel fins to chop up and make a stuttered noise.

a SSQV HKS BOV has nothing to do with dosing....its just like any other BOV... but produces a whistle like sound when air goes through it. if you block it off, its the same as your OEM bov and every other blocked bov. does nothing special.

the Dose you hear on VLs sound like stupid dolphins or piegons as you heard.

they run a small metal pipe, no bov, and multiple bends to magnify thehigh pictched stuttered noise.

alot of the high powered veicles in japan and here automaticlly produce this sound as a side affect for high horsepower aplications but usally produce a much deeper tone due to larger turbos.

this is because piping is usally much larger due to larger turbocharges and dont run many bends.

although the title says HKS SSQV, its incorrect.

personally i hate the high pitched doses, which have been attached to wogs and VLs. but i am madly in love with the noise similar to the 650hp R34 GTR videoed above. would prefer it over a OEM "CHOO" or whistle anyday

my 2c

:P

Link to comment
Share on other sites

the vl boys cut a gap in there intercooler piping to put there afm so that there is no restriction between pod and turbo.

using diffrent lengths and angles of piping gives diffrent pitch noises.

alot of the guys that i went drifting with on the track a while ago had it, sounds sick when your using your accelerator to control the slide.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...