Jump to content
SAU Community

"stu Tu Tu"


Recommended Posts

Theres nothing wrong with 'dosing' and it won't wreck your turbo, as long as you're not being like a VL driving dickhead and deliberately stuffing around with your intake piping to get the most ridiculous noise possible.

I had a Turbosmart Atmo BOV originally fitted on mine, which got a lot of cop hassles, so went for a standard BOV blocked off, and it sounds a LOT better than a standard recirc BOV, which again sounds better than one of those utterly gay need for speed style SSQV's.

Link to comment
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

When my car decides to run, it's flutter sounds near on identical to the video of the R34 posted earlier...

Ask RISKIN how it sounds... When it doesn't miss fire... LOL

Link to comment
Share on other sites

dude... the Polarizer was the part which made the HDT's so special! That and having to run 22psi in the tyres for it to work, and not tampering with or removing it, so that the positive vibrations could flow throughout the car and turn a family sedan into a track warrior! I'm still hanging out to drive a Polarizer equipped HDT to feel the awesomeness :blink:

Link to comment
Share on other sites

I dose all day all night on 18PSI, haven't seen the turbo die yet. Stock intake pipe, stock crossover pipe, GReddy TypeS BOV wound in so hard I might has well not have it there.

and no, I didn't use a HKS SSQV, that has no effect to dosing, unless the piston snapped and the BOV is now not functiuonal

Link to comment
Share on other sites

dose ftw.

no BOV, big front mount, steel pipe off the turbo. the loud high pitched dose is normally curteousy of a 2.5" straight pipe straight off the turbo, when you start adding bends, and go to bigger pipes, the sound normally gets deeper.

the AFM being moved to the cooler piping is to stop stalling from the air reverberating through the AFM

Link to comment
Share on other sites

  • 1 month later...
What the hell is that noise? I've heard it twice now, both times from VLs. Is it some tricked out BoV?

If you ask me I think it sound ridiculous. My girlfriend was in hysterics for about 10min as we drove beside this thing.

Thanks.

i dont see how its so funny? it sounds mint

Link to comment
Share on other sites

To the ignorant it sounds like a really wimpy/silly sound to come out of what looks like a tough car.

Like WRXs and EVO's, except they look like a girl's ride with girly ricey sneezies.

Do agree though, that fully hektik sound doesnt match the VLs. Something you'dexpect from Jap imports?

Link to comment
Share on other sites

lol they are morons then.

+1

if that's all you're buying the car for then... fail.

ive had mine blocked off for a while now, doesn't make high pitched noises, just a clean whoosh sorta flutter. reason why i have it is that i noticed through hills/track, when changing gears it holds more pressure in the pipe and you get faster spool in to next gear but only high up in the revs as the air gets trapped and not released straight away.

lots of people say different things, this is just form personal experience.

Edited by SkyHi_33
Link to comment
Share on other sites

here is my old car fluttering and doing its thing.

fluttered the entire two years that i had it. absolutely no damage to the car/turbo whatsoever. it fluttered so loud because of numerous induction mods and very high boost. factory blow off valve gave up but replaced with an aftermarket plumb back.

Edited by DrewII
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...