Jump to content
SAU Community

Recommended Posts

What is the best way to learn drift for the novice.

Pay $500 and do a drift school for the day, use their cars to start with etc?

Attend some club days and learn from others?

The first is expensive, the latter is likely non productive or teaches bad habits.

I'm a bit isolated, country nsw is not exactly drift centre of the universe. So will likely use the first option for high impact - means I don't have to keep travelling backwards and forwards to Sydney repeatedly, but can do a couple of drift school days and then progress to the club days if I want.

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/
Share on other sites

yep, I would go to a training day. going to club drift days is ok, but if you don't pick it up fast you will easily get frustrated. also 90% of those days do not allow any passengers so you can't have someone in the car with you and you really do need that to show you what you're doing wrong. asking people for tips and hoping for the best does not always work. you'll learn more in 1 full day or proper instruction than you would at half a dozen club/open drift days I think.

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4675683
Share on other sites

the baron is right... use someone elses properly set up car, and someone who knows how to drive it... they can teach you its behaviours and driving requirements which you can then take to your car... whereas you might think you need more power... you might find out that you actually need more entry speed or some simple suspension tweaks..

i did a rally day... it was expensive, but a load of fun and something ill never forget.. the lessons learnt there have helped me with getting the most out of all my cars.

which part of country nsw are you from??

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4675710
Share on other sites

  • 3 weeks later...

Mate I would have to agree with the above and suggest the school. It's a shorter way to learn what has taken us years to work out. You certainly won't be lining up for Drift Australia after your first day, but you will have the basic skill set to take forward if you like drifting. Other benifits are that at least with the Project D drift school you get to use cars built by some of Aus best drifters, trained by the guys that built them, and you don't have to beat up on your own car. :)

You might even see me! lol

I still gotta learn to drift too :D

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4712768
Share on other sites

Id suggest school!

But... :D

If you have, or know someone who has a big empty paddock its pretty handy. That's where i've done a bit of testing, trying stuff out, although its a very different feel to tarred surface etc, its still pretty good for a bit of a practice go, not to mention shits and giggles.

:)

Edited by Anthony13
Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4712790
Share on other sites

I definitely recommend attending a School day to start out, it is well worth the price. You are being taught in our purpose built drift cars by our professional and experienced instructors.

www.projectd.com.au

Have a look at our new website it's got everything you need to know, our instructors are also on our forum pretty much every day so feel free to ask them or myself anything you need to know.

Amy

Link to comment
https://www.sau.com.au/forums/topic/276056-drift-beginner/#findComment-4715299
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey y'all, I have a completely stock 1991 R32 GTR, yesterday I took my car out and went for about a thirty minute drive. It was fine on the way there but when returning home I think the car might have gone into a limp mode. I was cruising in 5th gear around 130km/h, the hicas light came on and there was a significant loss of power. About a minute later I hear a thump, the car starts driving normal again and is fine the rest of the drive back. This is the second time its happened, same as now it was fine on the trip there. On the way back it had the hicas light on but that time I would feel the power going in and out before hearing the same thump and it being fine.  I have no idea idea what causing this, but if anyone has any ideas it would be great as a start chasing the cause of this. Also I can provide more details if needed. Thank you
    • When sanding across a convex panel, you need to sand, as much as possible, at right angles to the curve. If the panel is compound convex curved (ie curved in both directions) then you are SOL and have to use "craftsmanship" to get it right.
    • Today in Skyline arts and crafts!! I’ve made some progress.    had to put extra notes in there so I don’t stuff it up 😂
    • This sounds like me. And then why I leave shit that I had previously hobbled together broken. Lately I've changed strategies to "If I don't want to justify the money on decent stuff, I'm not going to justify hobbling it together". I'm still for DIY, but DIY it properly is more my thing. However, I am terrible on not setting up backups still... Which reminds me, I need to go backup some of my work VM machines... Oh, it's also why I've become a lover of building things into Docker Containers... Then I just need a machine that can run docker, and bam, that specific system is up and running, on the specific versions of everything I need for it to run (In the event a change in required software version breaks something else). Also, these days, my steep learning curves are spent with work related stuff, and on very varied projects, that my want to do other random projects like build a dashboard for my own car has dwindled away to "I just want the car running", which is my current PITA, as I'm getting the Landcruiser usable again, and it has just been non-stop the past 6 to 8 weeks of buying parts, and working on it. Oh, and tools that are meant to be fit for purpose... And they break, because 25 year old 4WD decides it's stronger... But by the time I have it ready to roll back out the drive way, nearly all the stuff in it will have been touched and serviced, so the damn thing better give me NO FREAKING ISSUES, for at least the next 50,000KMs! Just redone whole front of the motor, and resealed the up top stuff, replaced a bunch of things getting perished, new timing belt done, water pump, lower timing cover (Toyota diesel engine runs timing GEARS for the bottom half the motor, and a timing belt from halfway up to the top), new harmonic balancer, fix up the alternator, new thermostat, full swivel hub rebuild, new bearings and seals front and back, steering box rebuild, new battery, and today, it turns out a rear shock has let go, so four new shocks are about to go on order, and that will leave me with after the next run of work, to see if I need to order just a brake caliper re-seal, or if I'll need new pistons in them too. Oh, and I'll finish welding in the new floor sheet metal shortly too. Presently I just want it finished already... But once all the above is done, I still need to fully service diffs, gearbox, transfer, and motor. Then flush and bleed the clutch, and flush and bleed the brakes. But enough about our waffle, back to Duncan's heat problems... I think for Duncan he just gets a thermoswitch, and a manual switch to run some water misters. Thermo so it's only on above certain temps, and the manual switch so it can be turned off even if it is above certain temperatures. IE, switch on for "I'm now on track", then it doesn't need any "smart" computers that might try and do things wrong. And switch the thing off completely on the cool down lap, so when he stops in pits, there's not even a possibility of it dripping any water out to get him in trouble.
×
×
  • Create New...