Jump to content
SAU Community

Recommended Posts

The yellow bar is of no concern, I think from memory it says something like "Information" my screen shows the yellow bar with japanese characters too.

I agree with Pure, it may just be a service reminder, a few people here though can read japanese so they may be able to confirm.

Have you ran the diagnostic test to see if you get error codes? If not, do a search of the forum and you should find the test to perform.

i thought the yellow bar meant you have no navigation disc inserted??

anyway, have a search for 'V35 pit', and there are detailed instructions on how to clear that. its not serious, its a service interval reminder is all

i thought the yellow bar meant you have no navigation disc inserted??

anyway, have a search for 'V35 pit', and there are detailed instructions on how to clear that. its not serious, its a service interval reminder is all

*cue music*

Tell him what he's won Dave!

*cue crowd cheering*

Well for his effort to alleviate any worrying by "scottnothing", zei20l, or Iain as others know him, has won a fantastic prize consisting of his name associated with solving problems for M35 Stagea's for the lifetime of the SAU website!

*crowd applause*

Not only that! But if you look deep enough, you will find this correct answer in the annals of internet history for all time!!

*crowd goes nuts*

Ladies and Gentlemen! ZEI20L!!!!

.... yes it is a slow work day.

Edited by iamhe77
  • Like 1
i thought the yellow bar meant you have no navigation disc inserted??

Double bonus,,,,,,, he got this one right toooooo..... yyyeeehhhhhh.

Let us know if you can not find the instructions of how to clear with a search on the forum. very easy.

Cheers

Andy

Ill have a look for the stuff to clear it. Weird that it would be a service indicator as it only just past 43000. Kinda strange time to service.

It would be cool if you could push something and some lil Japanese guys would come from nowhere and change your tires and fill your fuel.

Ill have a look for the stuff to clear it. Weird that it would be a service indicator as it only just past 43000. Kinda strange time to service.

It would be cool if you could push something and some lil Japanese guys would come from nowhere and change your tires and fill your fuel.

the service intervals are user set so they can come up any time.

I am a bit of a rookie at the forum thing but i cant find the instructions to remove the Pit on the display.

Also does anyone know how to manually set it?

Cheers,

OK.....(I want a prize for this Cameron!)

1/hit the 4th button along the top of the HU display controller.

2/Scroll down to the second last setting....just before ECT....and push the controller in.

3/press controller in again

4/scroll up 1 press controller in again....this reset's

5/then go back 1....bottom RH button once on the HU display controller

6/scroll down one and repeat steps 3 to 5

7/scroll down another one and repeat steps 3 to 5

8/scroll down another one and repeat steps 3 to 5

9/done

to manually set it just set the KM's to what you want....don't know what the translations are though.

Edited by Jetwreck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Do the following first and get back to us. - Clean and verify your IACV - Verify for vacuum leaks/post MAF leaks. (Pressure test is the best and cheapest way) - Do you have a BOV with stock ecu/MAF? If so, remove it.     
    • Hey all, The skyline I have is stalling when the engine is at normal operating temp.  When starting it while it is cold, it'll run just fine.  I have replaced the battery (bad cell), I have replaced the fuel pump, fuel filter and clean the MAF sensor.  Any other suggestions?
    • Thanks for all the information on this.  I tried ordering the parts from Amayama website and all 3 Solenoids are discontinued and not available.  Does anyone have any other websites to suggest that I could find the parts?   Separate issue-- I will start a new thread, but basically the vehicle is stalling when warmed up.
    • It's unfortunate what Tomei USA has done to Tomei's name in general. I'm very weary of ordering parts from them now. I only order direct from a Japanse source (e.g Nengun). At least their logos are different, so you end up knowing what you have. 
    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
×
×
  • Create New...