Jump to content
SAU Community

Recommended Posts

hay guys so the 33 is fully stripped now so though i would make a thread of everything..

rear bar $150

left door window and all $150

centre consol $80

rear lights $100

front lights $100

rear trims $100

cat back xzaust.. 3 inch to dual 2.5 inch $300

bonnet $150

boot with spoiler $170

spoiler alone $60

glovebox $50

water bottle for the water thingos $40

r33 radiator $150

back seats $150

some muti stud meshys, rims have gutter rash, two rims have shitty tires, other two have no tires $400

whole rear end in cradel, LSD diff, 4 wheel steer, all arms, no rotors calapers hubs or handbrake cables $800

stock r33 sussy $300

stock front sway bar $50

front hubs $100

all front arms $offers on watever arms you want

brake master/booster $200

rear half cut good contion,including, window, lights and rear bar $500

air contion condensor$100

RB25DET complete everything there, straight out a 33

has around 124000 kms

$3700

RB25DET gearbox, has everything to

$1400

or do a deal with them both!

r33 tailshaft $250 (good condition)

3 inch dump and front pipe in one $200

ask for other stuff

adelaide

0411592938

can get pics off whatever just ask

Edited by scottmiller92
Link to comment
https://www.sau.com.au/forums/topic/276259-33-parts-rb25det-motor-and-box/
Share on other sites

bump

price drop on motor and box

motor...

rb25det motor out a 33

comes with everything, loom, computer, turbo, water pump, alternator, ect ect..

lookin at 2500ono

also got rb25det gearbox

is really smooth.

also comes with everything, shifter, xmember, speed sensor ect ect

looking at 1300ono

or 3500 for both

0411592938

adelaide

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • lol no cats running str pipes … might put the high flow back on but I suspect it might effect my ignition timing a bit. 
    • That looks a bit like yellowing to me. If the rear bar was looking like that from rich idle, I'd ask the question, do you have a catalytic converter fitted, and fully working?
    • Oh yeah gets really bad down here. I’ll have to upgrade the heater and wind screen wipers as well for optimal performance.
×
×
  • Create New...