R33 Gtr Brembo Brakes Complete Inc Pads

[Munro]

1997 R33 GTR Brembo front brakes for sale.

Good condition inc slotted rotors & pagid pads.

Brakes are off the GTR & are in Adelaide.

$1000

[M I K E]

pm kidafa, chris may be keen

[kidafa]

Mike,

How do i tell if these will clear the racing hearts? Also will it be direct bolt on?

[nigelswazi]

Mike,

How do i tell if these will clear the racing hearts? Also will it be direct bolt on?

Hi Chris,

How much room do you currently have between the brakes you have now and the wheel? If you have an inch you should be fine if you have less it will be a tight squeeze and may require you to use a thin spacer for clearance. As for fitment you will need to see what size bolt your calipers are held on with as I have seen Stageas with both the more common 12mm bolt size as found on 300ZX, R32 GTS-T, R33 GTS-T or it will be the 14mm bolt size as found on R34 GT-T, R33 GTR, R34GTR etc. If you have 14mm you are laughing as it will be a straight bolt on with only wheel clearance being an issue. If you have the 12mm bolt size you will have to drill out the two 12mm diameter holes you have on each front stud axel to 14mm diameter and it will fit.

If you go to R33 GTR Brakes at the front you will need to use 17" wheels if you get defected so R34 GT-T stockies would be best I have a set you get borrow with new tread if you ever need them just give me a sms or call.

[mark33gtst]

Front and rear calipers and disks? Pics?

[M I K E]

Hi Chris,

How much room do you currently have between the brakes you have now and the wheel? If you have an inch you should be fine if you have less it will be a tight squeeze and may require you to use a thin spacer for clearance. As for fitment you will need to see what size bolt your calipers are held on with as I have seen Stageas with both the more common 12mm bolt size as found on 300ZX, R32 GTS-T, R33 GTS-T or it will be the 14mm bolt size as found on R34 GT-T, R33 GTR, R34GTR etc. If you have 14mm you are laughing as it will be a straight bolt on with only wheel clearance being an issue. If you have the 12mm bolt size you will have to drill out the two 12mm diameter holes you have on each front stud axel to 14mm diameter and it will fit.

If you go to R33 GTR Brakes at the front you will need to use 17" wheels if you get defected so R34 GT-T stockies would be best I have a set you get borrow with new tread if you ever need them just give me a sms or call.

nigel, i think you've been mis-informed. r33gtr is 12mm so will bolt up to r32/r33 etc no worries. it's only r34gt-t and r34gt-r that are the 14mm bolts and require modding the stub axle.

chris, they will be a direct bolt on for you mate, i can't remember how much clearance the racing harts have - just check how much room between the back of the spoke and your current caliper and let me know what it is. even if you can't fit it, we know those wheels could do with 25mm spacers anyway

Front and rear calipers and disks? Pics?

did you even read the first post mate? lol it says front only haha

[mark33gtst]

did you even read the first post mate? lol it says front only haha

Ooops... Its friday and has been a long week... I'm a bit slow atm..

[nigelswazi]

nigel, i think you've been mis-informed. r33gtr is 12mm so will bolt up to r32/r33 etc no worries. it's only r34gt-t and r34gt-r that are the 14mm bolts and require modding the stub axle.

chris, they will be a direct bolt on for you mate, i can't remember how much clearance the racing harts have - just check how much room between the back of the spoke and your current caliper and let me know what it is. even if you can't fit it, we know those wheels could do with 25mm spacers anyway

did you even read the first post mate? lol it says front only haha

Thanks Mike was getting confused with R34 GTR and R34 GT-T that have the 14mm bolts don't know why I thought R33 GTR were the same sorry guys.

[Munro]

I will get some photos of the front brakes shortly.

[tommygr34]

hey mate im really intrested can you pm me the postage cost to melb 3150 thanks let me know ASAP TOM 0401035221

[Munro]

I've got a local buyer looking at them tomorrow. If he doesnt take them I will get you a postage price on Monday.

[Munro]

These Brembo brakes are available for $1000 (buyer could not fit them on his car)

[Munro]

Postage is $50 to Melbourne or Sydney. $80 to Perth (2 boxes)

[Munro]

I also have a set of front & rear Carbon fibre brakes with Strange Engineering calipers.

They are not suitable for street use though. Perfect for Drag racing as they are very light

& pull up very well from high speed.

[Munro]

Prefer to sell complete - do not want to separate.

[Mike Rowe]

I am in WA, only want the calipers, have rotors and too heavy to send any way.

I will pay you $800 into your account tomorrow if you are interested

Call 0417943522

regards

Mike

Edited June 29, 2009 by Mike Rowe

[Munro]

These brakes are SOLD pending payment. I will let you know if falls thru.

Only $80 to send lot to Perth so better to just pay $1000 + postage for the lot.

[Mike Rowe]

These brakes are SOLD pending payment. I will let you know if falls thru.

Only $80 to send lot to Perth so better to just pay $1000 + postage for the lot.

Munro I will take them if sale falls through, call me 0417943522

Mike

[tteerrrryy]

spewin! i woulda loved these!

[Munro]

OK, these are now gone.