Jump to content
SAU Community

R33 Gtr Brembo Brakes Complete Inc Pads

Munro
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted
Mike,

How do i tell if these will clear the racing hearts? Also will it be direct bolt on?

Hi Chris,

How much room do you currently have between the brakes you have now and the wheel? If you have an inch you should be fine if you have less it will be a tight squeeze and may require you to use a thin spacer for clearance. As for fitment you will need to see what size bolt your calipers are held on with as I have seen Stageas with both the more common 12mm bolt size as found on 300ZX, R32 GTS-T, R33 GTS-T or it will be the 14mm bolt size as found on R34 GT-T, R33 GTR, R34GTR etc. If you have 14mm you are laughing as it will be a straight bolt on with only wheel clearance being an issue. If you have the 12mm bolt size you will have to drill out the two 12mm diameter holes you have on each front stud axel to 14mm diameter and it will fit.

If you go to R33 GTR Brakes at the front you will need to use 17" wheels if you get defected so R34 GT-T stockies would be best I have a set you get borrow with new tread if you ever need them just give me a sms or call.

M I K E Mentor

M I K E

Posted
Posted
Hi Chris,

How much room do you currently have between the brakes you have now and the wheel? If you have an inch you should be fine if you have less it will be a tight squeeze and may require you to use a thin spacer for clearance. As for fitment you will need to see what size bolt your calipers are held on with as I have seen Stageas with both the more common 12mm bolt size as found on 300ZX, R32 GTS-T, R33 GTS-T or it will be the 14mm bolt size as found on R34 GT-T, R33 GTR, R34GTR etc. If you have 14mm you are laughing as it will be a straight bolt on with only wheel clearance being an issue. If you have the 12mm bolt size you will have to drill out the two 12mm diameter holes you have on each front stud axel to 14mm diameter and it will fit.

If you go to R33 GTR Brakes at the front you will need to use 17" wheels if you get defected so R34 GT-T stockies would be best I have a set you get borrow with new tread if you ever need them just give me a sms or call.

nigel, i think you've been mis-informed. r33gtr is 12mm so will bolt up to r32/r33 etc no worries. it's only r34gt-t and r34gt-r that are the 14mm bolts and require modding the stub axle.

chris, they will be a direct bolt on for you mate, i can't remember how much clearance the racing harts have - just check how much room between the back of the spoke and your current caliper and let me know what it is. even if you can't fit it, we know those wheels could do with 25mm spacers anyway :whistling:

Front and rear calipers and disks? Pics?

did you even read the first post mate? lol it says front only haha

nigelswazi Mentor

nigelswazi

Posted
Posted
nigel, i think you've been mis-informed. r33gtr is 12mm so will bolt up to r32/r33 etc no worries. it's only r34gt-t and r34gt-r that are the 14mm bolts and require modding the stub axle.

chris, they will be a direct bolt on for you mate, i can't remember how much clearance the racing harts have - just check how much room between the back of the spoke and your current caliper and let me know what it is. even if you can't fit it, we know those wheels could do with 25mm spacers anyway :)

did you even read the first post mate? lol it says front only haha

Thanks Mike was getting confused with R34 GTR and R34 GT-T that have the 14mm bolts don't know why I thought R33 GTR were the same sorry guys.

Munro Experienced

Munro

Posted
  • Author
Posted

I also have a set of front & rear Carbon fibre brakes with Strange Engineering calipers.

They are not suitable for street use though. Perfect for Drag racing as they are very light

& pull up very well from high speed.

Mike Rowe Enthusiast

Mike Rowe

Posted
Posted (edited)

I am in WA, only want the calipers, have rotors and too heavy to send any way.

I will pay you $800 into your account tomorrow if you are interested

Call 0417943522

regards

Mike

Edited by Mike Rowe
Munro Experienced

Munro

Posted
  • Author
Posted

These brakes are SOLD pending payment. I will let you know if falls thru.

Only $80 to send lot to Perth so better to just pay $1000 + postage for the lot.

Mike Rowe Enthusiast

Mike Rowe

Posted
Posted
These brakes are SOLD pending payment. I will let you know if falls thru.

Only $80 to send lot to Perth so better to just pay $1000 + postage for the lot.

Munro I will take them if sale falls through, call me 0417943522

Mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • eli995
      R32 gtr hood latch support/lock part number search

      By eli995 · Posted

      Wanting to avoid this if possible but kinda looking like I may not have a choice 😭
    • eli995
      R32 gtr hood latch support/lock part number search

      By eli995 · Posted

      Ok awesome thank you. Just wanted to have them in case I can find some and need to compare part numbers!
    • Victory
      Neil's R33 Gts-t Build

      By Victory · Posted

      All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • GabsReDeal
      New owner of a Skyline R32 GTS

      By GabsReDeal · Posted

      It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
    • acsplit
      Breakfast Cafe By Lamanna - Saturday 18th January

      By acsplit · Posted

      Time: Saturday 18th January - 9am -10:30am Where:  Cafe By Lamanna 10 English St, Essendon Fields VIC 3041  - https://g.co/kgs/mhVKvAB Registration: So we can give the cafe a heads up on rough booking numbers please rsvp below Registration Link: https://forms.gle/wPtfj9Gp8bvCiouo8
×
×
  • Create New...