Jump to content
SAU Community

Recommended Posts

So the time has come to sell my Silvia, due to family commitments.

I hardly ever drive this thing and is always garaged. Just been serviced (always serviced by Shawn at Boost Worx)

Drives perfectly. Running on 14psi boost (high) and 7psi boost (low)

S13 sr20Det.

154,XXX kms on chassis

New redtop motor from Japan

**Located in Adelaide**

BODY

Fibreglass vented bonnet

Genuine Origin Stylish Front Bumper

Genuine Origin Stylish Side Skirts

Genuine Origin Stylish Rear Bar

20mm wider vented front guards

Rear guards hand flared

Shaved boot with no wing no boot lock and no ariel

All badges and side moulds removed

VT style clear side indicators

Genuine Origin clear front indicators

SUSPENSION

Rear Cusco Strut brace

Rear Whiteline anti-camber bushes

Nylon cradle bushes

Solid steering shaft spacer

27mm solid Whiteline S13 front swaybar

8 Point damper adjusterable BANER suspension

Adjustable chamber tops

JJR Strut brace

ENGINE

SR20DET redtop

JJR Stainless steel 3 inch mandrel bent front/dump pipe

3 inch mandrel bent exhaust system

Rear Cannon

Genuine HDI intercooler

Custom Polished Stainless steel intercooler piping

Bosch 040 fuel pump

K&N Pod filter

ASE Catch can

Oil Cooler and Re-locator

Turbosmart duel stage boost controller

K&N Pod Filter

DRIVELINE

Extreme Heavy duty clutch

Custom made heavy duty pivot bolt

INTERIOR

Recaro reclinable bucket seat

Momo-course wheel

Aftermarket gearknob

Spin turn handbrake button

Sunroof

Blitz Boost guage

Hornet Car Alarm

Turbo Timer

Boost gauge

Water gauge

Oil gauge

Tinted windows

I'm chasing

$12,000 ono

ALSO WILLING TO CONSIDER SWAPS

0433 499 793

http://img188.imageshack.us/img188/4779/pa100531.jpg

http://img198.imageshack.us/img198/5202/pa100530.jpg

http://img36.imageshack.us/img36/2492/l8ad...bfcd0f4daad.jpg

http://img36.imageshack.us/img36/3274/l020...db18d3421db.jpg

http://img26.imageshack.us/img26/8671/l477...3a3d4f89fef.jpg

http://img26.imageshack.us/img26/6294/lfd9...c814bb5ce3e.jpg

http://img26.imageshack.us/img26/5435/lfe3...19ced2a57a3.jpg

http://img26.imageshack.us/img26/8044/n817...72978755955.jpg

Edited by Lakai
Link to comment
https://www.sau.com.au/forums/topic/276560-s13-onevia/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
×
×
  • Create New...