Jump to content
SAU Community

Recommended Posts

G-Day all, I've been looking a few Series II R33's and some R34's. I know a fair bit about the R33, but not that much about the R34's, can someone help me out here?

How do the 2 compare? And what sort of price range should a good R34 GT-T manual be?

All opinions appreciated, thanks,

Crazy.

Link to comment
https://www.sau.com.au/forums/topic/2766-price-indication-on-r34-please/
Share on other sites

  Quote
BY BY There was a very nice looking white R34 GTT in Unique Cars (current edition) for $35K - from memory it was a victorian car.

1998. 17" alloy wheels, 5 speed manual, Nismo suspension, Australian complianced, in spotless condition throughout

$35,000

very good price

Hey Guys,

On the same note, does anyone know of any Sydney dealers with R34's at a decent price. I'm after a dealer as I don't want the hassle of selling my 33 privately. and would prefer to try and trade it in.

PS Sorry George, I think the convertable Stang will have to wait. probably when I go thrugh my mid-life crisis.

:P

Thanks

Bobby

meggalla, gotta disagree about resale value of the r34.

A 98 model now worth about 40k, will probably only get you about 25k in 2 years time.

just think about the r33's.. when they were around 4 years old (1994 in 1998) they sold for over 40k... now, the same car, you wont be able to get 20k for..

i disagree Pete,

try going to a dealer and asking 40k for a GTT? you'll find they are selling them closer to 50-55k and powerplayimports.com have "SWOOP" forsale at 75k! high hopes but its immaculate.

2 things which i believe will hold the value of R34's in particular, the second one not so particular to an R34:

1. the R34 will most likely be the last skyline with the RB engine and its arguably the best ever made.

2. stricter grey import laws in australia will certainly make it alot harder for imports to make it to our shores. So a certain demand vs supply will automatically hold their value up (with all imports in general).

thats my 2c anyways...

Back to Crazy's question...its all about preference, i know lots of ppl who love the R33 shape and lots who love the R34's shape. In terms of exterior and interior they are worlds apart. In terms of engine performance, there is a fair amount of differences.

* same engine but R34 has NEO equivalent

* R34 makes 48Nm more torque, 1200rpm's lower than the R33

* R34 runs 0.7bar boost, a little higher than the R33

* R34 peak power has risen to 206kw @ 6400rpm

these were possible through changes in engine management system, cam timing and turbo system.

There is a dearler here trying to sell 2 for 50odd, and these are brand new, about 5k on the clock on they have been there for a couple of years.

Generally the sell for 40 in the yards, my old man has one he got 12months ago for 40. Some sell privately for under 40k.

They will probably drop to low 30s in a couple of years i think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...