Cefiro Quests

[mark ii]

Just a quick quest guys. I have tried searching and read the sticky above. Is the slave cylinder and manual tailshaft for the cefiro same as the r32?

Thanks in advance

[works 510]

Slave is the same, cant confirm on the tailshaft though

[mark ii]

Slave is the same, cant confirm on the tailshaft though

cheers mate. This is for a manual conversion so if anyone can confirm the tailshaft or other models that fit.

[Nic_A31]

http://www.skylinesaustralia.com/forums/A3...ist-t93523.html

[Dan_J]

the shaft will not bolt up, you use the rear part of your auto tail shaft and the front half of the r32 manual then you need to change the the bolt pattern by undoing that size 26 bolt so they will bolt up

[mark ii]

Just searched and read that...one last quest 2door or 4 door r32? thanks mate

the shaft will not bolt up, you use the rear part of your auto tail shaft and the front half of the r32 manual then you need to change the the bolt pattern by undoing that size 26 bolt so they will bolt up

[AdMan]

the shaft will not bolt up, you use the rear part of your auto tail shaft and the front half of the r32 manual then you need to change the the bolt pattern by undoing that size 26 bolt so they will bolt up

Also.. my car had a manual tailshaft to begin with but the unijoint was buggered.. (woo regency!) So I managed to find a 32 skyline tailshaft, not sure if it was a 4 or 2 door, pretty sure it was 2, unbolt it and switch it with the one already on the car. Worked a charm...

[daisu]

4door and 2door skylines are the same size.