Jump to content
SAU Community

Rb26 Engine Parts Sale


Recommended Posts

  • Hey all, I have to clear out some room for the up coming projects so I have decided to part with some of the things that have
    accumulated in the work shop! The pics below are for your viewing pleasure,so if something catch's your eye feel free to
    PM me.The parts are from a 32GTR or a 33GTR V-SPEC. I am located in Adelaide, South Australia. I am willing to ship
    items so P&H will be at buyers expense!
    Cheers HULI
    2 x RB26 blocks (one has some grooves in bores from ring land failure and the other block is basically perfect)
    Slightly grooved block $200 (can be honed out)
    Perfect block (V-SPEC) item $600
    RB26 crank (larger oil pump drive snout) $400
    RB30 crank + girdle $80
    2 x RB26 girdle + crank scraper + oil pick up $150 each
    4WD GTR sump + gears + baffle plates (Off 33) $500
    V-SPEC turbo's (no shaft play and don't blow smoke) $800
    32GTR turbo's (no shaft play and don't blow smoke)
    R33 head (has cams, valves, shims, springs etc) $1000
    Fuel rail + regulator + injectors $350
    Fuel rail and reg only $80
    Throttle bodies + linkages $350
    Intake plenum $100
    Injector plate $400
    Pistons and rods (set of 6 but one has ring land failure) $150
    Cam gear backing plate $80
    Stock cam wheels $80 the pair
    2 x water pumps (stock) $30 each
    2 x AAC valve assembly $150 each
    CAS + CAS support bracket $250 (crank angle sensor)
    Coils (set or 6) + brackets $100
    Odd pipes,exh manifolds, elbows, O2 sensors,2 x y connecting pipes $5-$40
    2 x Oil and water lines $100 each set
    2 x oil cooler assembly $150 (one has magnetic Drift filter)
    3 x Harmonic balancer (2 from 32gtr and 1 from 33 Vspec) 32 ones $50
    33 one $100
    2 x Alternators $100 each
    2 x idle regulator valves $100 each
    Uncut wiring loom (complete from computer to battery) $450
    2 x power steering brackets $20 each

Cheer HULI

th_06282009184.jpgth_06282009188.jpgth_06272009141.jpgth_06282009182.jpgth_06282009179.jpgth_06282009178.jpgth_06282009175.jpgth_06282009173.jpgth_06092009126.jpgth_05302009088.jpgth_05302009089.jpgth_06282009152.jpgth_06282009154.jpgth_06282009155.jpgth_06282009156.jpgth_06282009157.jpgth_06282009158.jpgth_06282009159.jpgth_06282009160.jpgth_06282009161.jpgth_06282009163.jpgth_06282009162.jpgth_06282009164.jpgth_06282009166.jpgth_06282009167.jpgth_06282009169.jpgth_06282009170.jpgth_06282009172.jpg

Link to comment
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

PM's sent.

4 interested parties in the blocks!

harmonic balancer back up for grabs- 2x R32GTR and 1xR33GTR vspec.(no response from buyer)

alot of interest in loom also!

If you require any of the remaining parts, be quick!

Send me a PM if you require added pics or just want a question cleared up!

Link to comment
Share on other sites

Both power steering brackets ****SOLD*****

Merging intake pipe ****SOLD**** ONLY ONE REMAINING!

VSPEC Block ****SOLD**** (Junga)

R32 harmonic balancer ****SOLD**** (sickr33) ONLY ONE REMAINING!

Engine mounts ****SOLD**** (sickr33)

Crank main gear ****SOLD**** (sickr33)

VSPEC R33 harmonic balancer ****SOLD****

ALL OTHER PARTS STILL REMAIN! SEND US A PM IF YOU REQUIRE THESE PARTS!!

CHEERS HULI

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Installed  Nismo coppermix twin competition spec last year in my bnr32 with pull trans with Oem slave cylinder. The point at where the clutch disengages/enages is right at the top of the clutch pedal, meaning I barely have to push the pedal down for the clutch to be disengaged.  You guys that have the same combo are you experiencing this high pedal bite point??   Secondly I’d like to have the disengagement point lower meaning I have to push the pedal more(further not effort)for it to be disengaged.  I’m thinking to use a Nismo big operating cylinder(bigger bore at 13/16 vs Oem 3/4) which will require more pedal stroke to get the equivalent movement at the clutch fork. But I see Nismo web site says not to mix these 2 as the Nismo big operating cylinder doesn’t have enough stroke to disengage??? Any folks run both the coppermix twin pull with Nismo cylinder??    Thanks in advance for the replies but prefer only guys with pull clutches to respond. thanks     
    • Any chance u could let us know where your based ?
    • That’s a great deal and I would jump on it if you were closer. Melbourne is a bit of a hike for me though unfortunately 
    • I wonder if there is much to tell without knowing where the bolts where bought from. If it comes from Amazon or similar all bets are off. Can't trust them. And I fear not everybody knows that. Wasn't it @TurboTapin who ended up with the fake fuel lines recently? The submersible ones which very much weren't submersible at all. It kind of applies to everything nowadays. Doesn't matter if it's hardware or electronics. The fancy camera might have internals swapped out for cheap knockoffs. The hard drive will report a certain size but not actually be able to write it all. Shit like that. A bit depressing but the reality is you really have to be weary of where and how you buy stuff
×
×
  • Create New...