Jump to content
SAU Community

Recommended Posts

Just got my PowerFC installed and I have been monitoring my engine knock.

Normally it is between 12 and 37.

The other day it was pretty hot during the day at it went up to 67.

Is this something to be worried about, or is it pretty normal?

Edited by R33-RB26DETT
Link to comment
https://www.sau.com.au/forums/topic/276897-rb26-safe-knock-levels/
Share on other sites

  • 2 weeks later...

I used to get crazy high readings on my PowerFC (this is on a Supra TT BTW) but nothing ever happened to my engine. I thought that surely there must be *something* wrong to be getting knock readings of 120+ (sometimes, but always only on WOT). So I got it retuned by a PowerFC guru, and now it's even worse :laugh: I've seen figures over 150, *however* this is the important part: I have never seen the Check Engine light illuminate.

I'm not sure what light it illuminates with the GTR but I assume they've wired it up to something! A lot of people in the Supra forums didn't seem to realise that the PowerFC *will* retard ignition automatically when it detects excessive knock, in tandem with illuminating the Check Engine light (or whatever it is in the GTR). I have also confirmed this with my tuner.

I have never witnessed any decrease in power on WOT either. I usually floor it then view the max readings on the hand controller straight after, and even after those figures of 150+, I have *never* seen the Check Engine light illuminate and have never felt any reduction in power, not to mention, I can't hear any knocking!! Although, with a decently loud exhaust and at 6000+rpm, you may not anyway :D

Bottom line: I don't think there's much you can do with abnormally high knock readings with a PowerFC. I think all you need to do is look for the Check Engine light, listen out for knock, and make sure you're not feeling a reduction in power. If you don't get any of this, just forget that you saw the high reading and be on your way :D I had some problem accepting this but the reality is, I've been giving it WOT for nearly 2 years and there are no signs of engine damage!

I'm not sure what light it illuminates with the GTR but I assume they've wired it up to something! A lot of people in the Supra forums didn't seem to realise that the PowerFC *will* retard ignition automatically when it detects excessive knock, in tandem with illuminating the Check Engine light (or whatever it is in the GTR). I have also confirmed this with my tuner.

Since when does the pfc retard knock? There are no settings for knock retard in fc edit.

knock sensors are known to be dodgy and fail, id definently look into buying a new one if you wanna be sure, im pretty sure standard ecu's retard the timing wen there is knock detected, otherwise why would u have one? however im not sure about the power fc, id assume it would if the stock ecu does tho

I used to get crazy high readings on my PowerFC (this is on a Supra TT BTW) but nothing ever happened to my engine. I thought that surely there must be *something* wrong to be getting knock readings of 120+ (sometimes, but always only on WOT). So I got it retuned by a PowerFC guru, and now it's even worse :laugh: I've seen figures over 150, *however* this is the important part: I have never seen the Check Engine light illuminate.

I'm not sure what light it illuminates with the GTR but I assume they've wired it up to something! A lot of people in the Supra forums didn't seem to realise that the PowerFC *will* retard ignition automatically when it detects excessive knock, in tandem with illuminating the Check Engine light (or whatever it is in the GTR). I have also confirmed this with my tuner.

I have never witnessed any decrease in power on WOT either. I usually floor it then view the max readings on the hand controller straight after, and even after those figures of 150+, I have *never* seen the Check Engine light illuminate and have never felt any reduction in power, not to mention, I can't hear any knocking!! Although, with a decently loud exhaust and at 6000+rpm, you may not anyway :D

Bottom line: I don't think there's much you can do with abnormally high knock readings with a PowerFC. I think all you need to do is look for the Check Engine light, listen out for knock, and make sure you're not feeling a reduction in power. If you don't get any of this, just forget that you saw the high reading and be on your way :D I had some problem accepting this but the reality is, I've been giving it WOT for nearly 2 years and there are no signs of engine damage!

Interesting...i've got a supra too which runs a PFC and i can get abnormally high knock readings too...especially if i hit the limiter by mistake...and my engine check light does not come on as well...i am pretty sure that the PFC does not retard timing though...

I tried a little test the other day to see whether it was road/engine noise and/or faulty knock sensor:

run on the freeway when no1 is around then push the clutch in and reset the controller to get a reading with no engine load; ive found that on smooth roads there is still 8-10knock and on harsh/bumpy roads i can get as high as 10-18knock.

i guess this would work for a faulty knock sensor too ie if you get 50knock when coasting.

I used to get crazy high readings on my PowerFC (this is on a Supra TT BTW) but nothing ever happened to my engine. I thought that surely there must be *something* wrong to be getting knock readings of 120+ (sometimes, but always only on WOT). So I got it retuned by a PowerFC guru, and now it's even worse :laugh: I've seen figures over 150, *however* this is the important part: I have never seen the Check Engine light illuminate.

I'm not sure what light it illuminates with the GTR but I assume they've wired it up to something! A lot of people in the Supra forums didn't seem to realise that the PowerFC *will* retard ignition automatically when it detects excessive knock, in tandem with illuminating the Check Engine light (or whatever it is in the GTR). I have also confirmed this with my tuner.

I have never witnessed any decrease in power on WOT either. I usually floor it then view the max readings on the hand controller straight after, and even after those figures of 150+, I have *never* seen the Check Engine light illuminate and have never felt any reduction in power, not to mention, I can't hear any knocking!! Although, with a decently loud exhaust and at 6000+rpm, you may not anyway :laugh:

Bottom line: I don't think there's much you can do with abnormally high knock readings with a PowerFC. I think all you need to do is look for the Check Engine light, listen out for knock, and make sure you're not feeling a reduction in power. If you don't get any of this, just forget that you saw the high reading and be on your way :laugh: I had some problem accepting this but the reality is, I've been giving it WOT for nearly 2 years and there are no signs of engine damage!

your tuner is flat out lying or just does not know what he's talking about. Power FC DOES NOT RETARD IGNITION ON DETECTING ENGINE KNOCK. I hear this myth all the time. the factory ecu certainly can do it, but power fc does not which is why a good tune is important.

it is possible your high knock readings are being caused by a faulty knock sensor. but if it was real knock do not think the power FC will save you by reducing timing. cause it most definitely wont.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...