Jump to content
SAU Community

Recommended Posts

I've seen that grill on a few Series 2's was deffinetly on one i test drove, but after seeing the photo above maybe they came on both??? or has that car pictured been changed its hard to tell.

Ok technically they are a series 1.5 1995 model. The series 1.5 had a series II rear (colour coded SKYLINE garnish and spoiler update) with a slightly updated front bumper and grill. Drivers airbag was standard on them and the passenger airbag was optional.

However i still class it as a series 1 since it has series 1 headlights (or in the case of the photo i posted it has series III GTR headlights, which as we all know are the same shape as series 1 headlights) and had a series 1 engine. Series II were 1996-1997 and had a normal series II empty grill, not the one above.

Edited by PM-R33

Can't say for sure with such a small picture, but there is a S2 specific grill like that. As Liquid ice said its not as common as the standard series 2 grill, but its not the same as the one PM-R33 posted, as that is rounded on the edges to suit the series 1.

I'll post some photos of the series 2 version when I'm on my PC

Thanks for the replies guys, but it seems divided on what it is.

A little more info might have helped in the first place. Its gun metal grey which I don't believe the series 2 came out in, but I pulled the grill of my series 1.5 and tried this one and it didn't seem to fit.

Perhaps a better picture will help.

post-4688-1246256840_thumb.jpg

So what year models are those Series II's? Are they a factory grill or something aftermarket?

They where factory from what i understand and must of been an option on all series 2's from 96-98.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
×
×
  • Create New...