Jump to content
SAU Community

Recommended Posts

Got a white03 coupe inpected by my mechanic today, nothing wrong mechanically but...... :laugh:

There is unusual tyre wear on the inside of all 4 tyres, and when driving this causes a weird noise. Have done a bit of digging and i can see in the US people have been complaining of Feathering/tyre wear on 350z and G35.

has anyone had this issue with their car?

Edited by ther
Link to comment
https://www.sau.com.au/forums/topic/277045-got-a-car-inspected-today/
Share on other sites

If it has been lowered that would be the very main reason, because lowering the car without installing an offset bush or camber kit would cause the excessive negative camber, causing premature wear on the inside of the tyres....

If it has been lowered that would be the very main reason, because lowering the car without installing an offset bush or camber kit would cause the excessive negative camber, causing premature wear on the inside of the tyres....

No it hasn't been lowered. But there is feathering on both front and rear...

u might just need 2 do alignment...mayb the camber wasnt currect

Indeed that could solve it but the front aren't camber adjustable, or am i incorrect?

What i'm trying to verify if this is a "normal" issue with the car and if so anyone has an aftermarket adjustable camber control arms for the front such as the Stillen one that may help to rectify the issue.

As i said in the original question, has anyone here had a similar issue where they see feathering on both the front and rear tyres?

Hrmm no problems from my 03 coupe when it was running stock sussy. Tire wear was right for how it was driven.

Though interestingly, one tire (front passenger) was a bit more worn than others lol...weird.

Ther,

Most likely. Just have a look at the wheels too...if there are big impact marks, then you know the previous owner was probably drifting it or something and smacked it into the gutter bending some sussy arms etc. Doesn't help if they took off the damaged wheels and put the stockers on before selling though.

Why don't you ask the guy for a test drive ? Then say the wheels aren't aligned and get him to align them as part of the sale deal..if it still doesn't drive right after, walk away. Or get an inspection done on it in particular focusing on the underbody and suspension.

One thing is the alignment goes out pretty quick on these cars as they are so heavy.

Oaksey,

I follow what you're saying but when i push the car in left turns, it would wear more on the right and overall, the tire wear should balance out. Ah who knows...i guess i'll find out when i get my next set of tires, it's almost due for them too.

Ther,

Most likely. Just have a look at the wheels too...if there are big impact marks, then you know the previous owner was probably drifting it or something and smacked it into the gutter bending some sussy arms etc. Doesn't help if they took off the damaged wheels and put the stockers on before selling though.

Why don't you ask the guy for a test drive ? Then say the wheels aren't aligned and get him to align them as part of the sale deal..if it still doesn't drive right after, walk away. Or get an inspection done on it in particular focusing on the underbody and suspension.

One thing is the alignment goes out pretty quick on these cars as they are so heavy.

Oaksey,

I follow what you're saying but when i push the car in left turns, it would wear more on the right and overall, the tire wear should balance out. Ah who knows...i guess i'll find out when i get my next set of tires, it's almost due for them too.

got it inspected by pedders and they said need an alignment and the tyres are crap.... had a drive and so did my mechanic, aprt from the tyre road noise it ok...we had the car up on the hoist and no issues underneath apart from the inside wear of front and rear tyres.

Edited by ther

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, yeah I really like the color. Only paint I'd rather have is KN6, but those are expensive. Right now I'm trying to get the car to the point where I can get it tuned to 370hp so the whole setup can be driven legally, and pass the next inspection that is already due anyway. Beyond that lots of rust fixing I'm afraid, winter project is most likely going to be a front end teardown and fixing the strut tower rust. I know these can be driven daily but I don't think I will do so anytime soon. Will post a build thread soon with a list of issues and futute plans.   Cheers
    • Wanted to reply to this topic. I'm in the somewhat same boat with our Stagea. I'm trying to install a different rear diff. The Stagea/Skyline uses mounts on top of the rear diff for the ATTESA pump. Any way you can relocate the pump? I did find this kit https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34
    • So here's the deal, my wife picked up an S2 AWD Stagea. Super cool, clean car. Looks like the owner in Japan went track spec as it's got some heavy modifications including Exedy twin disk, tension rods, coilovers, GTR brakes, oil cooler & a Nismo 2 way rear diff. Now, cool mods for sure. But, she is just using this as a casual daily driver. The 2 way rear is AGGRESSIVE. It also has solid subframe bushings & poly diff bushings. So that doesn't help either. So far I've tried changing the diff fluid to the correct fluid. Even tried a little friction modifier. No help. This thing clunks, skips the tires & has some slight whine/NVH when driving. Might sound like I'm being picky, but just trying to find a better solution. Here in the states, it's impossible to find a Stagea rear diff. No luck. I do have a 300zx non-turbo diff. Same ratio, 5 bolt axles. On the Stagea, you need both front & rear diff ratios to match. This car is a 4.083. I'd like to just swap a normal rear diff into this thing. Nothing fancy. Even open diff is fine. She's not tracking the car LOL The difference is that the ATTESA pump mounts to the top of the rear diff. There are 3 total mounting points for the pump on top of the diff. With all this being said, what would be the best way to go about this? I could remove the Stagea diff & see if I could get somebody to possibly weld the 3 tabs/mounting points onto the 300zx diff so we could mount the pump on the 300zx diff. I could swap the internals from the 300zx into the Stagea diff but this is not in my comfort zone. Is it possible to mount the ATTESA pump to the underside of the car? Sorry for the paragraph. Just trying to figure out how to go about this. Any help is much appreciated! Stagea Differential - Note two top tabs, one bolt hole for ATTESA pump mounting   300zx Diff - No mounting tabs Also found this mounting kit ?? https://theskylineshed.com/products/nissan-oem-attesa-mounting-kit-to-suit-r32-r33-r34  
    • Not ready yet, but maybe later in the year?
×
×
  • Create New...