Jump to content
SAU Community

Recommended Posts

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=320390328680

i can get it in stainless all they way for just over $1100

wanting to know how much work there is installing it? as i have not done one myself.

and what do yas rekon about quality?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/277053-xforce-r34-gtt-exhaust/
Share on other sites

Exhaust systems like that from R32 - R34 are very easy to install, as long as you are fairly handy and have the right tools (a hoist always helps too).

X-Force are reasonable quality systems, not the greatest but not crap either... Although $1100 seems pretty expensive. I would call Trojan and speak with Angelo before you buy that exhaust, he might be able to source something better quality for around the same money.

I had an X-Force turboback system on my old R33 GTS-T and it seemed like a reasonable quality system, although I recall the guys at Powatone saying it was a bit of a bastard to fit.

I'd also be asking how loud it is without the silencer, unless you like having that big bung in there.

x-force isn't a bad brand.

Although, for that amount of $$$, you could go to custom city exhaust and get a custom exhaust made up to suit what you like (loud, quiet etc) for that sort of money.

I had a few x-force mufflers on previous cars, they worked a treat :laugh:

You can usually get a custom mild steel system made for around $900 - $1100 for a full turbo back exhaust.

As Mick said, go talk to Angelo @ Trojan about sourcing a system for you. A jap brand cat back system is usually around $800 (add $300 - $400 for a decent dumppipe).

Depends on what you want as well, loud, quiet, legal limit etc... The Kakimoto Regu systems have a very very nice growl without being obnoxiously loud.

If you were referring to me TiTAN, the $900 - $1100 custom mild does include a cat in the estimate, yes... I paid $950 for my first 3" mild steel custom setup for the whole thing.

That was with a ceramic cat, i'm now running a metalcat.

Mate, you should have no worries with the system.. The muffler in the middle should allow it to not be as drony as most 'cannon' style systems.

If you haven't had your standard dumppipe off before from the turbo, you may need to start getting some wd40 to all 6 bolts. The amount of heating/cooling they have gone through will make them a pain in the behind to get off.

Honestly, the first time i replaced the dump, i used a little bit of exhaust gasket goo with the factory gasket. I know it isn't the 'done' thing but it worked. It was replaced when the new turbo arrived about 5 - 6 months later.

If you are keen on keeping your current turbo and would like a new gasket, hit up Angelo @ Trojan, he should be able to get a genuine one for you pretty easily (he may even have one stocked).

Sweet, i still gotta get it passed for rego befor i do anything anyway, so i got a bit of time...

can ya recomend a good place to take it to for that? its stock so it shouldn't have a problem, just have to get it transfered into my name and into ACT rego

Unless the rules have changed recently, I think you will find that if you bought it privately from interstate that it HAS to go through Dickson for an identity check as well as a roadworthy.

When I bought my GTR in from Vic 6 months ago I was told that it had to go through Dickson even though it came via a compliance shop/dealer, just didn't need the identity check part.

Just ring the motor registry and ask.

I bought mine off a mate in Canberra. I had a lot of trouble getting someone to look at it because it was lightly modified and because it was a grey import. Problem was when I rang to find out I got a different answer from someone every time.

I couldn't get an appointment in Dickson, so to avoid me getting fined they ended up letting me take it to Jackos (which used to be in Dickson).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...